symbols.
- Default Environment:
- CONFIG_EXTRA_ENV_SETTINGS
+ CFG_EXTRA_ENV_SETTINGS
Define this to contain any number of null terminated
strings (variable = value pairs) that will be part of
For example, place something like this in your
board's config file:
- #define CONFIG_EXTRA_ENV_SETTINGS \
+ #define CFG_EXTRA_ENV_SETTINGS \
"myvar1=value1\0" \
"myvar2=value2\0"
The ways to configure the ddr interleaving mode
==============================================
1. In board header file(e.g.MPC8572DS.h), add default interleaving setting
- under "CONFIG_EXTRA_ENV_SETTINGS", like:
- #define CONFIG_EXTRA_ENV_SETTINGS \
+ under "CFG_EXTRA_ENV_SETTINGS", like:
+ #define CFG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:ctlr_intlv=bank" \
......
and CONFIG_BOOTP_MAY_FAIL.
If both fail or are disabled, static settings are used.
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"ipconfigcmd=if test \\\"$dhcpenabled\\\" -ne 0;" \
"then " \
"dhcpfail=0;dhcp || dhcpfail=1;" \
"ext2load scsi 0:2 04000000 /boot/initrd.img-3.13.0-58-generic; " \
"run boot"
- #undef CONFIG_EXTRA_ENV_SETTINGS
- #define CONFIG_EXTRA_ENV_SETTINGS "boot=zboot 03000000 0 04000000 ${filesize}"
+ #undef CFG_EXTRA_ENV_SETTINGS
+ #define CFG_EXTRA_ENV_SETTINGS "boot=zboot 03000000 0 04000000 ${filesize}"
and change CONFIG_BOOTARGS value in configs/minnowmax_defconfig to::
To use this, put something like this in your board header file::
- #define CONFIG_EXTRA_ENV_SETTINGS "fdtcontroladdr=10000\0"
+ #define CFG_EXTRA_ENV_SETTINGS "fdtcontroladdr=10000\0"
Build:
The U-Boot "syslinux" and "pxe boot" commands require a number of environment
variables be set. Default values for these variables are often hard-coded into
-CONFIG_EXTRA_ENV_SETTINGS in the board's U-Boot configuration file, so that
+CFG_EXTRA_ENV_SETTINGS in the board's U-Boot configuration file, so that
the user doesn't have to configure them.
fdt_addr:
Traditionally, the default environment is created in `include/env_default.h`,
and can be augmented by various `CONFIG` defines. See that file for details. In
-particular you can define `CONFIG_EXTRA_ENV_SETTINGS` in your board file
+particular you can define `CFG_EXTRA_ENV_SETTINGS` in your board file
to add environment variables.
Board maintainers are encouraged to migrate to the text-based environment as it
If this CONFIG is empty, U-Boot uses CONFIG SYS_BOARD as a default, if
the file board/<vendor>/<board>/<SYS_BOARD>.env exists. Otherwise the
environment is assumed to come from the ad-hoc
- CONFIG_EXTRA_ENV_SETTINGS #define
+ CFG_EXTRA_ENV_SETTINGS #define
config SAVEENV
def_bool y if CMD_SAVEENV
help
Normally, the default environment is automatically generated
based on the settings of various CONFIG_* options, as well
- as the CONFIG_EXTRA_ENV_SETTINGS. By selecting this option,
+ as the CFG_EXTRA_ENV_SETTINGS. By selecting this option,
you can instead define the entire default environment in an
external file.
/* I2C */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"loadaddr=40010000\0" \
"u-boot=u-boot.bin\0" \
/* this must be included AFTER the definition of CONFIG COMMANDS (if any) */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"loadaddr=10000\0" \
"u-boot=u-boot.bin\0" \
env/embedded.o(.text*);
#ifdef CONFIG_DRIVER_DM9000
-# define CONFIG_EXTRA_ENV_SETTINGS \
+# define CFG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \
"loadaddr=10000\0" \
. = DEFINED(env_offset) ? env_offset : .; \
env/embedded.o(.text);
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"loadaddr=10000\0" \
"u-boot=u-boot.bin\0" \
#define CFG_SYS_I2C_PINMUX_CLR (0xFFF0)
#define CFG_SYS_I2C_PINMUX_SET (0x000F)
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"loadaddr=10000\0" \
"uboot=u-boot.bin\0" \
. = DEFINED(env_offset) ? env_offset : .; \
env/embedded.o(.text*);
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"loadaddr=10000\0" \
"u-boot=u-boot.bin\0" \
/* I2C */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"loadaddr=40010000\0" \
"u-boot=u-boot.bin\0" \
/* I2C */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"loadaddr=40010000\0" \
"u-boot=u-boot.bin\0" \
/* I2C */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"u-boot=u-boot.bin\0" \
/* High Level Configuration Options */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"sdram_type=SDRAM\0" \
"flash_type=AM29LV160DB\0" \
"loadaddr=0x400000\0" \
#define FDTFILE "mpc8379_rdb.dtb"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"netdev=eth1\0" \
"uboot=" CONFIG_UBOOTPATH "\0" \
"tftpflash=tftp $loadaddr $uboot;" \
* Environment Configuration
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:ecc=off\0" \
"netdev=eth0\0" \
"uboot=" CONFIG_UBOOTPATH "\0" \
* Environment Configuration
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \
"netdev=eth0\0" \
"uboot=" CONFIG_UBOOTPATH "\0" \
#define __USB_PHY_TYPE utmi
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:ctlr_intlv=cacheline," \
"bank_intlv=cs0_cs1\0" \
"netdev=eth0\0" \
"fdtfile=t1023rdb/t1023rdb.dtb\0"
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
ARCH_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:ctlr_intlv=cacheline," \
"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \
#define FDTFILE "t1042rdb/t1042d4rdb.dtb"
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=cs0_cs1;" \
"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
"usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
#define __USB_PHY_TYPE utmi
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:" \
"ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \
"bank_intlv=auto;" \
#define __USB_PHY_TYPE utmi
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:" \
"ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \
"bank_intlv=auto;" \
#define CTRL_INTLV_PREFERED cacheline
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:" \
"ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \
"bank_intlv=auto;" \
/* Board Clock */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootm_size=0x10000000\0" \
"usb_pgood_delay=2000\0"
#ifndef CONFIG_SPL_BUILD
#include <environment/ti/dfu.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
"fdtfile=undefined\0" \
"finduuid=part uuid mmc 0:2 uuid\0" \
"main_pcba_aux_3=0\0" \
"main_pcba_aux_4=0\0" \
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
AM335XX_BOARD_FDTFILE \
MEM_LAYOUT_ENV_SETTINGS \
BOOTENV \
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
"bootdir=/boot\0" \
"bootfile=zImage\0" \
#define V_SCLK (V_OSCK)
#ifndef CONFIG_SPL_BUILD
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"loadaddr=0x80200000\0" \
"kloadaddr=0x84000000\0" \
"fdtaddr=0x85000000\0" \
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
AM335XX_BOARD_FDTFILE \
MEM_LAYOUT_ENV_SETTINGS \
BOOTENV
#endif /* CONFIG_MTD_RAW_NAND */
/* Environment information */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
"console=ttyS2,115200n8\0" \
"fdtfile=am3517-evm.dtb\0" \
#ifndef CONFIG_SPL_BUILD
#include <environment/ti/dfu.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
"fdtfile=undefined\0" \
"finduuid=part uuid mmc 0:2 uuid\0" \
"partitions=" PARTS_DEFAULT
/* Incorporate settings into the U-Boot environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
EXTRA_ENV_AM62A7_BOARD_SETTINGS \
"partitions=" PARTS_DEFAULT
/* Incorporate settings into the U-Boot environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
EXTRA_ENV_AM625_BOARD_SETTINGS \
DFU_ALT_INFO_OSPI
/* Incorporate settings into the U-Boot environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
EXTRA_ENV_AM642_BOARD_SETTINGS \
#endif
/* Incorporate settings into the U-Boot environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
DEFAULT_FIT_TI_ARGS \
#define CFG_SYS_UART_PORT 0
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"upgrade_uboot=loady; " \
"protect off 0xffc00000 0xffc1ffff; " \
"erase 0xffc00000 0xffc1ffff; " \
#define BOOTENV_RUN_NET_USB_START ""
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
MEM_LAYOUT_ENV_SETTINGS \
"boot_file=Image\0" \
"ramdisk_addr_r=0x18400000\0" \
"scriptaddr=0x18280000\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
"boot_file=zImage\0" \
"boot_script_dhcp=boot.scr\0" \
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
ENV_DEVICE_SETTINGS \
BOOTENV
#define CFG_SYS_INIT_RAM_SIZE 0x8000
/* Default environemnt variables */
-#define CONFIG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80200000\0" \
+#define CFG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80200000\0" \
"stdin=serial\0" \
"stdout=serial\0" \
"stderr=serial\0" \
"done\0"
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"disable_giga=yes\0" \
"usb_pgood_delay=2000\0" \
"nor_bootdelay=-2\0" \
* u-boot: 'set' command
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"loaderversion=11\0" \
"card_id="__stringify(ASTRO_ID)"\0" \
"alterafile=0\0" \
/* Address and size of Primary Environment Sector */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"monitor_base=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0" \
"update=" \
"protect off ${monitor_base} +${filesize};" \
#define CFG_SYS_NAND_READY_PIN GPIO_PIN_PD(5)
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"console=console=ttyS0,115200\0" \
"bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\
"bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0"
func(RAM, ram, na)
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"kernel_addr_r=0x00080000\0" \
"pxefile_addr_r=0x01f00000\0" \
"scriptaddr=0x01f00000\0" \
/*
* Environment settings
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"upgrade=if mmc rescan && " \
"fatload mmc 0:1 ${loadaddr} u-boot-update.img && " \
"iminfo ${loadaddr} && source ${loadaddr}; then; else echo " \
#define NANDARGS ""
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
"boot_fdt=try\0" \
"bootpart=0:2\0" \
QSPI_FLASH \
FLASH_IMAGES
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
ARCH_ENV_SETTINGS
#endif /* __BCM_NS3_H */
/*
* Enable in-place RFS with this initrd_high setting.
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdtsaveaddr=" __stringify(CONFIG_SYS_FDT_SAVE_ADDRESS) "\0" \
"initrd_high=0xffffffff\0" \
"fdt_high=0xffffffff\0"
#include "rcar-gen3-common.h"
-#undef CONFIG_EXTRA_ENV_SETTINGS
+#undef CFG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"usb_pgood_delay=2000\0" \
"script=boot.scr\0" \
"image=Image\0" \
#define CFG_SYS_SDRAM_BASE 0x00000000
#define CFG_SYS_SDRAM_SIZE 0x40000000
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"pxefile_addr_r=0x2000000\0" \
"scriptaddr=0x3000000\0" \
"kernel_addr_r=0x2000000\0" \
/* boot command, including the target-defined one if any */
/* Extra env settings (including the target-defined ones if any) */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BK4_EXTRA_ENV_SETTINGS \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
#define LOAD_OFFSET(x) 0x8##x
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BUR_COMMON_ENV \
"verify=no\0" \
"scraddr=" __stringify(LOAD_OFFSET(0000000)) "\0" \
/* Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BUR_COMMON_ENV \
"cfgaddr=0x106F0000\0" \
"scraddr=0x10700000\0" \
#define V_SCLK (V_OSCK)
/* Default environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BUR_COMMON_ENV \
"scradr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"cfgscr=mw ${dtbaddr} 0;" \
#define V_SCLK (V_OSCK)
/* Default environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BUR_COMMON_ENV \
"scradr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"bootaddr=0x80001100\0" \
"emmc_dev=0\0"
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
CONFIG_MFG_ENV_SETTINGS \
M4_BOOT_ENV \
AHAB_ENV \
"bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
CONFIG_MFG_ENV_SETTINGS \
M4_BOOT_ENV \
"script=boot.scr\0" \
"nand read ${loadaddr} NAND.kernel; " \
"bootz ${loadaddr} - ${fdt_addr}\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
"fdt_addr=0x87800000\0" \
"boot_fdt=try\0" \
#define CFG_SYS_I2C_PCA953X_ADDR 0x20
#define CFG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} }
-#undef CONFIG_EXTRA_ENV_SETTINGS
+#undef CFG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0" \
"loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0" \
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
RELOCATION_LIMITS_ENV_SETTINGS \
LOAD_ADDRESS_ENV_SETTINGS \
"console=ttyS0,115200\0" \
/* Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"fdt_addr_r=0x18000000\0" \
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"loadaddr=0x80200000\0" \
"fdtaddr=0x81200000\0" \
"bootm_size=0x8000000\0" \
#endif
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
MEM_LAYOUT_ENV_SETTINGS \
UBI_BOOTCMD \
"${fdt_addr};\0" \
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
AHAB_ENV \
BOOTENV \
CONFIG_MFG_ENV_SETTINGS \
"ramdisk_addr_r=0x18400000\0" \
"scriptaddr=0x18280000\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
"boot_file=zImage\0" \
"boot_script_dhcp=boot.scr\0" \
#endif
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
MEM_LAYOUT_ENV_SETTINGS \
MODULE_EXTRA_ENV_SETTINGS \
#define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
MEM_LAYOUT_ENV_SETTINGS \
UBI_BOOTCMD \
#define VIDEO_IO_OFFSET 0
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
"kernel-ver=4.4.0-22\0" \
"boot=zboot 03000000 0 04000000 ${filesize}\0" \
"upd_uboot=tftp 100000 conga/u-boot.rom;" \
* Environment Configuration
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"netdev=eth1\0" \
"consoledev=ttyS1\0" \
"u-boot=u-boot.bin\0" \
/* Environment in SPI NOR flash */
/* Keep device tree and initrd in lower memory so the kernel can access them */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_high=0x10000000\0" \
"initrd_high=0x10000000\0"
#include <environment/ti/mmc.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
"bootpart=0:2\0" \
"mmc_mmc_fit=run mmcloadfit;run mmcargs addcon; bootm ${fit_addr}\0" \
/* Default environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_high=0xffffffff\0" \
"console=ttymxc0,115200n8\0" \
"addcon=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \
/* NAND */
/* Keep device tree and initrd in lower memory so the kernel can access them */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_high=0x10000000\0" \
"initrd_high=0x10000000\0"
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
/* Keep device tree and initrd in lower memory so the kernel can access them */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_high=0x10000000\0" \
"initrd_high=0x10000000\0"
/* NAND */
/* Keep device tree and initrd in lower memory so the kernel can access them */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_high=0x10000000\0" \
"initrd_high=0x10000000\0"
* Environment
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"ethaddr=00:01:90:00:C0:81\0" \
"dtbaddr=0x81000000\0" \
"nfsroot=/opt/projects/images/vladimir/oe/devkit3250/rootfs\0" \
DEFAULT_LINUX_BOOT_ENV
/* Environment information */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
"console=ttyO2,115200n8\0" \
"mmcdev=0\0" \
#define VIDEO_IO_OFFSET 0
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
"kernel-ver=4.4.0-24\0" \
"boot=zboot 03000000 0 04000000 ${filesize}\0" \
"upd_uboot=usb reset;tftp 100000 dfi/u-boot.rom;" \
#endif
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"console=ttymxc0,115200\0" \
"fdt_addr=0x18000000\0" \
"fdt_high=0xffffffff\0" \
"sf write ${loadaddr} 0x0 ${filesize};" \
"fi\0" \
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
PARTS_DEFAULT \
"gpio_recovery=93\0" \
"check_em_pad=gpio input ${gpio_recovery};test $? -eq 0;\0" \
* Default environment variables
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"stdin=serial\0" \
"stdout=serial\0" \
"stderr=serial\0" \
* Default environment variables
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"console=console=ttyS0,115200\0" \
"kernel=/boot/uImage\0" \
"initrd=/boot/uInitrd\0" \
#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
/* Default env settings */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hostname=draco\0" \
"ubi_off=2048\0"\
"nand_img_size=0x400000\0" \
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS BOOTENV
+#define CFG_EXTRA_ENV_SETTINGS BOOTENV
#endif
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0)
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"loadaddr=0x95000000\0" \
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0" \
#define CFG_SYS_BAUDRATE_TABLE { 115200, 230400, 460800, 921600 }
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootm_size=0x5000000\0" \
"bootm_low=0x80000000\0" \
"bootcmd=bootm $prevbl_initrd_start_addr\0"
* Default environment variables
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"x_bootcmd_ethernet=ping 192.168.2.1\0" \
"x_bootcmd_usb=usb start\0" \
"x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
* Default environment variables
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"x_bootcmd_ethernet=ping 192.168.1.2\0" \
"x_bootcmd_usb=usb start\0" \
"x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
/* Default Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"initrd_high=0xffffffff\0" \
"ramdisk_addr_r=0x8000000\0" \
"usb0Mode=host\0usb1Mode=host\0usb2Mode=device\0" \
/* BOOT */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"load_kernel=ext4load scsi 0:1 0x90100000 uImage-2004\0" \
"load_fdt=ext4load scsi 0:1 0x95000000 ft2004-pci-64.dtb\0"\
"boot_fdt=bootm 0x90100000 -:- 0x95000000\0" \
#define CONFIG_MXC_UART_BASE UART2_BASE
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"board=EL6Q\0" \
"cma_size="__stringify(EL6Q_CMA_SIZE)"\0" \
"chp_size="__stringify(EL6Q_COHERENT_POOL_SIZE)"\0" \
CONSOLE_STDIN_SETTINGS \
CONSOLE_STDOUT_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
CONSOLE_ENV_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
"fdtfile=" FDTFILE "\0" \
* Environment
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"upgrade_image=u-boot.bin\0" \
"upgrade=emsdp rom unlock && " \
"fatload mmc 0 ${loadaddr} ${upgrade_image} && " \
COMMON_ENV_NAND_CMDS
/* Default env settings */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hostname=etamin\0" \
"ubi_off=4096\0"\
"nand_img_size=0x400000\0" \
#define CFG_SYS_UBOOT_BASE CONFIG_TEXT_BASE
/* Misc */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
""
#endif /* __CONFIG_H */
#define STR_HELPER(s) #s
#define STR(s) STR_HELPER(s)
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"loadaddr=" STR(CONFIG_SYS_LOAD_ADDR) "\0" \
"bootspi=fdt addr 20100000 && fdt header get fitsize totalsize && " \
"cp.b 20100000 ${loadaddr} ${fitsize} && bootm; " \
/*
* Default environment settings
*/
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"ipaddr=172.16.12.50\0" \
"serverip=172.16.12.69\0" \
#define EXYNOS_FDTFILE_SETTING
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
EXYNOS_DEVICE_SETTINGS \
EXYNOS_FDTFILE_SETTING \
MEM_LAYOUT_ENV_SETTINGS \
#define EXYNOS_FDTFILE_SETTING
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
EXYNOS_DEVICE_SETTINGS \
EXYNOS_FDTFILE_SETTING \
MEM_LAYOUT_ENV_SETTINGS
EXYNOS_FDTFILE_SETTING \
MEM_LAYOUT_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
EXTRA_ENV_SETTINGS
#endif /* __CONFIG_EXYNOS78x0_COMMON_H */
* Environment Configuration
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"consoledev=ttyS1\0" \
"u-boot=u-boot.bin\0" \
#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE
/* Command definition */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"image=/boot/fitImage\0" \
"fdt_addr_r=0x18000000\0" \
"splash_addr_r=0x20000000\0" \
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
NETWORKBOOT \
"image=/boot/fitImage\0" \
"dev=mmc\0" \
* Default environment variables
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"console=console=ttyS0,115200\0" \
"kernel=/boot/uImage\0" \
"bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
/* Board Clock */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootm_size=0x10000000\0"
#endif /* __GOSE_H */
* Default environment variables
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"console=console=ttyS0,115200\0" \
"mtdids=nand0=orion_nand\0" \
"kernel=/boot/zImage\0" \
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
RELOCATION_LIMITS_ENV_SETTINGS \
LOAD_ADDRESS_ENV_SETTINGS \
"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
#define CFG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_high=0x20000000\0" \
"initrd_high=0x20000000\0"
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"kernel_name=Image\0" \
"kernel_addr_r=0x00080000\0" \
"fdtfile=hi6220-hikey.dtb\0" \
func(MMC, mmc, 0)
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"image=Image\0" \
"fdtfile=hi3660-hikey960.dtb\0" \
"fdt_addr_r=0x10000000\0" \
/*
* Environment settings
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"upgrade=if mmc rescan && " \
"fatload mmc 0:1 ${loadaddr} u-boot-update.scr && " \
"iminfo ${loadaddr} && source ${loadaddr}; then; else echo " \
/*
* Environment settings
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"upgrade=if mmc rescan && " \
"fatload mmc 0:1 ${loadaddr} u-boot-update.scr && " \
"iminfo ${loadaddr} && source ${loadaddr}; then; else echo " \
* Default environment variables
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"console=console=ttyS0,115200\0" \
"kernel=/boot/zImage\0" \
"fdt=/boot/ib62x0.dtb\0" \
#include "mv-common.h"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"console=console=ttyS0,115200\0" \
"kernel=/boot/uImage\0" \
"bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
#endif
/* Default environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"splashpos=m,m\0" \
"splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
/* Ethernet Configs */
#define CONFIG_FEC_MXC_PHYADDR 0
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
"bootm_size=0x10000000\0" \
/* Environment in MMC */
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"scriptaddr=0x14000000\0" \
"fdt_addr_r=0x13000000\0" \
"kernel_addr_r=0x10008000\0" \
#endif
/* Default environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootconf=conf-imx6q-bosch-acc.dtb\0"\
"mmcfit_name=fitImage\0" \
"mmcloadfit=ext4load mmc ${mmcdev}:${fitpart} ${fit_addr} ${mmcfit_name}\0" \
#devtypel #instance " "
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
NANDARGS \
BOOTENV
#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
-#undef CONFIG_EXTRA_ENV_SETTINGS
+#undef CFG_EXTRA_ENV_SETTINGS
/*
* Use:
*/
#define MY_CONFIG_BOOT_MODE "boot-mode=sd\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
MY_CONFIG_BOOT_MODE \
"image=zImage\0" \
"console=ttymxc0\0" \
BOOT_TARGET_DHCP(func)
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
"script=boot.scr\0" \
"image=Image\0" \
#include <configs/verdin-imx8mm.h>
/* Custom initial environment variables */
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
MEM_LAYOUT_ENV_SETTINGS \
"devtype=mmc\0" \
#endif
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=Image\0" \
"console=ttymxc1,115200\0" \
#define CFG_SYS_FSL_USDHC_NUM 2
#define CFG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"altbootcmd=setenv devpart 2 && run bootcmd ; reset\0" \
"bootlimit=3\0" \
"devtype=mmc\0" \
#include <config_distro_bootcmd.h>
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
"scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"ramdisk_addr_r=0x46400000\0" \
"scriptaddr=0x46000000\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
ENV_MEM_LAYOUT_SETTINGS \
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
"console=ttymxc1,115200\0" \
func(USB, usb, 1) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"splblk=0x42\0" \
BOOTENV
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=Image\0" \
"ramdiskimage=rootfs.cpio.uboot\0" \
#devtypel #instance " "
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
NANDARGS \
BOOTENV
"emmc_ack=1\0" \
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
EMMCARGS \
BOOTENV
"scriptaddr=0x40000000\0" \
"pxefile_addr_r=0x40100000\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"image=Image\0" \
BOOTENV \
"console=ttymxc1,115200\0" \
"pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
BOOTENV
func(USB, usb, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"splblk=0x40\0" \
BOOTENV
#define CFG_SYS_FSL_USDHC_NUM 2
#define CFG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"altbootcmd=run bootcmd ; reset\0" \
"bootlimit=3\0" \
"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
#include <config_distro_bootcmd.h>
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
"scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
#include <config_distro_bootcmd.h>
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
"scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
BOOT_TARGET_DHCP(func)
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
"script=boot.scr\0" \
"image=Image\0" \
func(USB, usb, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"splblk=0x40\0" \
BOOTENV
#include <config_distro_bootcmd.h>
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
"scriptaddr=0x43500000\0" \
"kernel_addr_r=0x40880000\0" \
#include <config_distro_bootcmd.h>
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
"scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"initrd_high=0xffffffff\0" \
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
CONFIG_MFG_ENV_SETTINGS \
"script=boot.scr\0" \
"image=Image\0" \
#endif
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
AHAB_ENV \
"script=boot.scr\0" \
"image=Image\0" \
"bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
CONFIG_MFG_ENV_SETTINGS \
M4_BOOT_ENV \
"script=boot.scr\0" \
#endif
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
AHAB_ENV \
"script=boot.scr\0" \
"image=Image\0" \
#endif
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
"scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
#endif
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
"scriptaddr=0x83500000\0" \
"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
DMAMEM_SZ_ALL)
#ifdef CONFIG_VIDEO
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"stdin=serial\0" \
"stdout=serial,vidconsole\0" \
"stderr=serial,vidconsole\0"
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
BOOTENV \
EXTRA_ENV_IOT2050_BOARD_SETTINGS
#include <config_distro_bootcmd.h>
/* Incorporate settings into the U-Boot environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
DEFAULT_FIT_TI_ARGS \
DFU_ALT_INFO_OSPI
/* Incorporate settings into the U-Boot environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
DEFAULT_FIT_TI_ARGS \
/* Board Clock */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootm_size=0x10000000\0"
/* SPL support */
#define CFG_SYS_FSL_USDHC_NUM 2
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS BOOTENV
+#define CFG_EXTRA_ENV_SETTINGS BOOTENV
#endif /* __KONTRON_MX6UL_CONFIG_H */
#define CONFIG_MALLOC_F_ADDR 0x930000
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS BOOTENV
+#define CFG_EXTRA_ENV_SETTINGS BOOTENV
#endif /* __KONTRON_MX8MM_CONFIG_H */
#include <config_distro_bootcmd.h>
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"image=Image\0" \
"console=ttymxc2,115200\0" \
"boot_fdt=try\0" \
func(PXE, pxe, 0)
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"env_addr=0x203e0004\0" \
"envload=env import -d -b ${env_addr}\0" \
"install_rcw=source 20200000\0" \
/* Command definition */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"console=ttymxc1,115200\0" \
"fdt_addr=0x75000000\0" \
"fdt_high=0xffffffff\0" \
#define CONFIG_MXC_USB_FLAGS 0
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"console=ttymxc0,115200\0" \
"fdt_addr=0x18000000\0" \
"fdt_high=0xffffffff\0" \
* Default environment variables
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"stdin=serial\0" \
"stdout=serial\0" \
"stderr=serial\0" \
/* Board Clock */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootm_size=0x10000000\0"
/* SPL support */
* Linux Information
*/
#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootenvfile=uEnv.txt\0" \
"fdtfile=da850-lego-ev3.dtb\0" \
"memsize=64M\0" \
#endif
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"scriptaddr=0x80000000\0" \
"pxefile_addr_r=0x80100000\0" \
"kernel_addr_r=0x80800000\0" \
#define CFG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
"console=ttymxc0\0" \
/* DDR */
#define CFG_SYS_SDRAM_SIZE 0x40000000
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
"verify=no\0" \
"initrd_high=0xffffffffffffffff\0" \
"kernel_addr=0x01000000\0" \
#include <config_distro_bootcmd.h>
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"verify=no\0" \
"loadaddr=0x80100000\0" \
"kernel_addr=0x100000\0" \
#define BOOT_TARGET_DEVICES(func) \
func(USB, usb, 0)
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
"verify=no\0" \
"fdt_high=0xffffffffffffffff\0" \
"kernel_addr=0x01000000\0" \
func(USB, usb, 0) \
func(DHCP, dhcp, na)
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
"verify=no\0" \
"initrd_high=0xffffffffffffffff\0" \
"kernel_addr=0x01000000\0" \
#define I2C_VOL_MONITOR_BUS_V_OVF 0x1
#define I2C_VOL_MONITOR_BUS_V_SHIFT 3
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
"verify=no\0" \
"kernel_addr=0x01000000\0" \
"kernelheader_addr=0x600000\0" \
#define __PHY_ETH2_MASK 0xFB
#define __PHY_ETH1_MASK 0xFD
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
"verify=no\0" \
"initrd_high=0xffffffffffffffff\0" \
"kernel_addr=0x01000000\0" \
#define HWCONFIG_BUFFER_SIZE 256
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
"initrd_high=0xffffffff\0"
#define HWCONFIG_BUFFER_SIZE 256
#ifdef CONFIG_LPUART
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
"initrd_high=0xffffffff\0" \
"hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
#else
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
"initrd_high=0xffffffff\0" \
"hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
"initrd_high=0xffffffff\0" \
"kernel_addr=0x61000000\0" \
#include <config_distro_bootcmd.h>
#ifdef CONFIG_LPUART
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootargs=root=/dev/ram0 rw console=ttyLP0,115200 " \
"cma=64M@0x0-0xb0000000\0" \
"initrd_high=0xffffffff\0" \
"cp.b $kernel_addr $load_addr " \
"$kernel_size && bootm $load_addr#$board\0"
#else
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootargs=root=/dev/ram0 rw console=ttyS0,115200 " \
"cma=64M@0x0-0xb0000000\0" \
"initrd_high=0xffffffff\0" \
/* SATA */
#ifndef SPL_NO_ENV
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
"board=ls1028aqds\0" \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"ramdisk_addr=0x800000\0" \
/* Initial environment variables */
#ifndef SPL_NO_ENV
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
"board=ls1028ardb\0" \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"ramdisk_addr=0x800000\0" \
#include <config_distro_bootcmd.h>
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0" \
#endif
#ifndef SPL_NO_MISC
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"ramdisk_addr=0x800000\0" \
"ramdisk_size=0x2000000\0" \
#ifndef SPL_NO_ENV
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"loadaddr=0x80100000\0" \
"kernel_addr=0x100000\0" \
/* Initial environment variables */
#ifdef CONFIG_NXP_ESBC
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
COMMON_ENV \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"loadaddr=0x90100000\0" \
#define IFC_MC_INIT_CMD \
"fsl_mc start mc 0x580A00000 0x580E00000\0"
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
COMMON_ENV \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"loadaddr=0x90100000\0" \
"$kernel_size && bootm $kernel_load#$BOARD\0"
#else
#if defined(CONFIG_QSPI_BOOT)
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
COMMON_ENV \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"loadaddr=0x90100000\0" \
"fsl_mc start mc 0x80a00000 0x80e00000\0" \
"mcmemsize=0x70000000 \0"
#elif defined(CONFIG_SD_BOOT)
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
COMMON_ENV \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"loadaddr=0x90100000\0" \
"fsl_mc start mc 0x80a00000 0x80e00000\0" \
"mcmemsize=0x70000000 \0"
#else /* NOR BOOT */
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
COMMON_ENV \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"loadaddr=0x90100000\0" \
#endif
#endif /* CONFIG_TFABOOT */
-#undef CONFIG_EXTRA_ENV_SETTINGS
+#undef CFG_EXTRA_ENV_SETTINGS
#ifdef CONFIG_TFABOOT
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"BOARD=ls1088ardb\0" \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"ramdisk_addr=0x800000\0" \
" && esbc_validate ${kernelheader_addr_r};" \
"bootm $load_addr#$BOARD\0"
#else
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"BOARD=ls1088ardb\0" \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"ramdisk_addr=0x800000\0" \
#define HWCONFIG_BUFFER_SIZE 128
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"loadaddr=0x80100000\0" \
"kernel_addr=0x100000\0" \
#define CFG_SYS_I2C_RTC_ADDR 0x68
/* Initial environment variables */
-#undef CONFIG_EXTRA_ENV_SETTINGS
+#undef CFG_EXTRA_ENV_SETTINGS
#ifdef CONFIG_NXP_ESBC
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"loadaddr=0x80100000\0" \
"kernel_addr=0x100000\0" \
#define IFC_MC_INIT_CMD \
"fsl_mc start mc 0x580a00000" \
" 0x580e00000 \0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"loadaddr=0x80100000\0" \
"loadaddr_sd=0x90100000\0" \
"$kernel_addr_sd $kernel_size_sd && " \
"bootm $load_addr#$BOARD\0"
#elif defined(CONFIG_SD_BOOT)
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"loadaddr=0x90100000\0" \
"kernel_addr=0x800\0" \
"fsl_mc start mc 0x80a00000 0x80e00000\0" \
"mcmemsize=0x70000000 \0"
#else
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"loadaddr=0x80100000\0" \
"kernel_addr=0x100000\0" \
#endif
/* Initial environment variables */
-#undef CONFIG_EXTRA_ENV_SETTINGS
+#undef CFG_EXTRA_ENV_SETTINGS
#ifdef CONFIG_TFABOOT
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"ramdisk_addr=0x800000\0" \
"ramdisk_size=0x2000000\0" \
"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
"bootm $load_addr#$board\0"
#else
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
"ramdisk_addr=0x800000\0" \
"ramdisk_size=0x2000000\0" \
/*
* Default environment variables
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootsource=legacy\0" \
"hdpart=0:1\0" \
"kernel_addr_r=0x00800000\0" \
/* MAC/PHY configuration */
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
EXTRA_ENV_SETTINGS \
"boot_scripts=lx2160aqds_boot.scr\0" \
"boot_script_hdr=hdr_lx2160aqds_bs.out\0" \
#define I2C_EMC2305_PWM 0x80
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
EXTRA_ENV_SETTINGS \
"boot_scripts=lx2160ardb_boot.scr\0" \
"boot_script_hdr=hdr_lx2160ardb_bs.out\0" \
#define CFG_SYS_RTC_BUS_NUM 0
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
EXTRA_ENV_SETTINGS \
"boot_scripts=lx2162aqds_boot.scr\0" \
"boot_script_hdr=hdr_lx2162aqds_bs.out\0" \
* Extra Environments
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"consdev=ttymxc0\0" \
"baudrate=115200\0" \
"bootscript=boot.scr\0" \
/* Ethernet Configuration */
#define CONFIG_FEC_MXC_PHYADDR 1
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"console=ttymxc0,115200 quiet\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
#include <config_distro_bootcmd.h>
-#ifndef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#ifndef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
"stdin=" STDIN_CFG "\0" \
"stdout=" STDOUT_CFG "\0" \
"stderr=" STDOUT_CFG "\0" \
"fi;" \
"fi;"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
EXTRA_ANDROID_ENV_SETTINGS \
"partitions=" PARTS_DEFAULT "\0" \
"mmcdev=2\0" \
#include <config_distro_bootcmd.h>
-#ifndef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#ifndef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
"unlock=yes\0"\
"nor0=flash-0\0"\
"mtdparts=mtdparts=flash-0:"\
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootm_size=0x10000000\0" \
"kernel_addr_r=0x84000000\0" \
"fdt_addr_r=0x88000000\0" \
#endif
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
"scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
#include <config_distro_bootcmd.h>
/* Extra environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
ENV_MEM_LAYOUT_SETTINGS \
BOOTENV
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0)
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"scriptaddr=0x40000000\0" \
BOOTENV
#define ENV_BOOT_CMD \
"mtk_boot=run boot_rd_img;bootm;\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_high=0x6c000000\0" \
ENV_DEVICE_SETTINGS \
ENV_BOOT_READ_IMAGE \
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0)
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"scriptaddr=0x40000000\0" \
BOOTENV
"serial#=1234567890ABCDEF\0" \
"board=mt8518\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_high=0x6c000000\0" \
ENV_DEVICE_SETTINGS \
ENV_BOOT_READ_IMAGE \
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
"kernel_addr_r=0x202000000\0" \
"fdt_addr_r=0x201000000\0" \
""
/* fdt_addr and kernel_addr are needed for existing distribution boot scripts */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"scriptaddr=0x6d00000\0" \
"pxefile_addr_r=0x6e00000\0" \
"fdt_addr=0x6f00000\0" \
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"scriptaddr=0x6d00000\0" \
"pxefile_addr_r=0x6e00000\0" \
"fdt_addr_r=0x6f00000\0" \
/* Ethernet */
/* Extra Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"update_sd_firmware_filename=u-boot.sd\0" \
"update_sd_firmware=" /* Update the SD firmware partition */ \
"if mmc rescan ; then " \
#define CFG_SYS_SDRAM_BASE PHYS_SDRAM_1
/* Extra Environments */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"update_sd_firmware_filename=u-boot.sd\0" \
"update_sd_firmware=" /* Update the SD firmware partition */ \
"if mmc rescan ; then " \
/* UBI and NAND partitioning */
/* Extra Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"ubifs_file=filesystem.ubifs\0" \
"update_nand_full_filename=u-boot.nand\0" \
"update_nand_firmware_filename=u-boot.sb\0" \
/* Framebuffer and LCD */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
"fdt_file=imx51-babbage.dtb\0" \
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_addr_r=0x75000000\0" \
"pxefile_addr_r=0x73000000\0" \
"scriptaddr=0x74000000\0" \
/* Command definition */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
"fdt_addr=0x71000000\0" \
"nfs=run choose_ip setargs bootargs_nfs; ${getcmd} ${loadaddr} " \
"${nfsserver}:${image}; bootm ${loadaddr}\0" \
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
PPD_CONFIG_NFS \
"image=/boot/fitImage\0" \
"dev=mmc\0" \
#define CONFIG_MXC_UART_BASE UART1_BASE
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"som_rev=undefined\0" \
"has_emmc=undefined\0" \
"fdtfile=undefined\0" \
#define EMMC_ENV ""
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
"fdtfile=undefined\0" \
/* MMC Configs */
#define CFG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
"console=ttymxc0\0" \
#define CONFIG_MXC_UART_BASE UART1_BASE
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"epdc_waveform=epdc_splash.bin\0" \
"script=boot.scr\0" \
"image=zImage\0" \
#define CONFIG_MXC_UART_BASE UART1_BASE
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
"console=ttymxc0\0" \
#define UPDATE_M4_ENV ""
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
UPDATE_M4_ENV \
"script=boot.scr\0" \
"image=zImage\0" \
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
"console=ttymxc0\0" \
#define CFG_SYS_FSL_USDHC_NUM 2
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
"console=ttymxc0\0" \
"bootimg part 0 1;"\
"rootfs part 0 2\0" \
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
UPDATE_M4_ENV \
CONFIG_MFG_ENV_SETTINGS \
CFG_DFU_ENV_SETTINGS \
#define PHYS_SDRAM 0x60000000
#define CFG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"image=zImage\0" \
"console=ttyLP0\0" \
"fdt_high=0xffffffff\0" \
#define PHYS_SDRAM_SIZE SZ_1G
#define CFG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
"console=ttyLP0\0" \
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"console=ttymxc0,115200n8\0" \
"fdt_addr_r=0x82000000\0" \
"fdt_high=0xffffffff\0" \
* Default environment variables
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootargs=console=ttyS0,115200\0" \
"autostart=no\0"
#include <config_distro_bootcmd.h>
#include <linux/stringify.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"console=ttymxc1\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
#define CFG_SYS_ONENAND_BASE ONENAND_MAP
/* Environment information */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"usbtty=cdc_acm\0" \
"stdin=usbtty,serial,keyboard\0" \
"stdout=usbtty,serial,vidconsole\0" \
#endif
/* Extra U-Boot environment. */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"consdev=ttymxc1\0" \
#define CONFIG_FEC_ENET_DEV 1
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"console=ttymxc0,115200n8\0" \
"image=zImage\0" \
"fdtfile=imx6ull-seeed-npi-dev-board.dtb\0" \
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"console=console=ttyS0,115200\0" \
"kernel=/boot/zImage\0" \
"fdt=/boot/nsa310s.dtb\0" \
# define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#endif /* CONFIG_CMD_USB */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"mmcdev=0\0" \
"mmcpart=2\0" \
"mmcargs=setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcpart} console=ttymxc0,${baudrate} panic=30\0" \
/** Stack starting address */
/** Extra environment settings */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"loadaddr=20080000\0" \
"ethrotate=yes\0"
#include <config_distro_bootcmd.h>
/* Extra environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"loadaddr=0x20080000\0" \
"kernel_addr_r=0x02000000\0" \
"ramdisk_addr_r=0x03000000\0" \
#else
/** Extra environment settings */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"loadaddr=20080000\0" \
"autoload=0\0"
* 1. BOOT: 100MiB 2MiB
* 2. ROOT: -
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"loadbootscript=load mmc ${mmcbootdev}:${mmcbootpart} ${scriptaddr} " \
"boot.scr\0" \
"loadkernel=load mmc ${mmcbootdev}:${mmcbootpart} ${kernel_addr_r} " \
*/
/* Define new extra env settings, including DFU settings */
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
EXYNOS_DEVICE_SETTINGS \
EXYNOS_FDTFILE_SETTING \
MEM_LAYOUT_ENV_SETTINGS \
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
"fdt_high=0xffffffff\0" \
#include <environment/ti/mmc.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
DEFAULT_FIT_TI_ARGS \
"if test ${fdtfile} = ''; then " \
"echo WARNING: Could not determine device tree to use; fi; \0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
ENV_FINDFDT \
ENV_DEVICE_SETTINGS \
MEM_LAYOUT_SETTINGS \
/* Environment information */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
"mmcdev=0\0" \
"finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
#include <environment/ti/mmc.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
"bootpart=0:2\0" \
* Board boot configuration
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_addr_r=0x86000000\0" \
"kernel_addr_r=0x80200000\0" \
"image=boot/Image\0" \
* Default environment variables
*/
-#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console=ttyS0,115200 " \
+#define CFG_EXTRA_ENV_SETTINGS "x_bootargs=console=ttyS0,115200 " \
CONFIG_MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \
"x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
"x_bootcmd_usb=usb start\0" \
/* MMC SPL */
#define COPY_BL2_FNPTR_ADDR 0x02020030
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"loadaddr=0x40007000\0" \
"rdaddr=0x48000000\0" \
"kerneladdr=0x40007000\0" \
#include "p1_p2_bootsrc.h"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"uboot=" CONFIG_UBOOTPATH "\0" \
"loadaddr=1000000\0" \
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"console=ttymxc0,115200n8\0" \
"fdt_addr_r=0x82000000\0" \
"fdt_high=0xffffffff\0" \
"mmc_mmc_fit=run mmcloadfit;run mmcargs addcon; bootm ${fit_addr}\0" \
/* Default environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_high=0xffffffff\0" \
"console=ttymxc0,115200n8\0" \
"addcon=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \
/* boot command, including the target-defined one if any */
/* Extra env settings (including the target-defined ones if any) */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
PCM052_EXTRA_ENV_SETTINGS \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"nandloadfit=ubi part rootfs;ubi readvol ${loadaddr} fit\0" \
"nandboot=run nandloadfit;run nandargs;bootm ${loadaddr}\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootm_size=0x30000000\0" \
"optargs=rw rootwait\0" \
ENV_MMC \
#define CONSOLE_DEV "ttyO5"
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
"fdtfile=am335x-pdu001.dtb\0" \
"bootfile=zImage\0" \
#include <environment/ti/dfu.h>
#include <environment/ti/mmc.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_MMC_TI_ARGS \
DEFAULT_LINUX_BOOT_ENV \
"bootfile=zImage\0" \
/* For RAW image gives a error info not panic */
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"image=Image\0" \
"console=ttymxc2,115200\0" \
"fdt_addr=0x48000000\0" \
#define CFG_SYS_UBOOT_BASE \
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"image=Image\0" \
"console=ttymxc0,115200\0" \
"fdt_addr=0x48000000\0" \
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
CONFIG_LEGACY_BOOTCMD_ENV \
BOOTENV
"bootmenu_3=Boot using PICO-Nymph baseboard=" \
"setenv baseboard nymph; saveenv; run base_boot\0" \
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"console=ttymxc0\0" \
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
BOOTMENU_ENV \
"bootmenu_2=Boot using PICO-Pi baseboard=" \
"setenv fdtfile imx6ul-pico-pi.dtb\0" \
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
"splashpos=m,m\0" \
BOOTENV
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"image=zImage\0" \
"splashpos=m,m\0" \
"splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
#endif
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=Image\0" \
"console=ttymxc0,115200\0" \
/* USB */
#define CFG_SYS_USB_OHCI_REGS_BASE 0x00500000
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"partition=nand0,0\0" \
"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
/* USB */
#define CFG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"partition=nand0,0\0" \
"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
* Default environment variables
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootargs_console=console=ttyS0,115200\0" \
"bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \
"ext2load usb 0:1 0x01100000 /uInitrd\0"
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
LOAD_ADDRESS_ENV_SETTINGS \
"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
#define CFG_SYS_SDRAM_BASE 0x0
/* Default environemnt variables */
-#define CONFIG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80200000\0" \
+#define CFG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80200000\0" \
"stdin=serial\0" \
"stdout=serial\0" \
"stderr=serial\0" \
#include <config_distro_bootcmd.h>
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"image=Image\0" \
BOOTENV \
"scriptaddr=0x90100000\0" \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"loader_mmc_blknum=0x0\0" \
"loader_mmc_nblks=0x780\0" \
"env_mmc_blknum=0xf80\0" \
/* Board Clock */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootm_size=0x10000000\0"
/* SPL support */
#define GLOBAL_IO_DRIVE_CONTROL_OFFSET 0x4c
/* max command args */
-#define CONFIG_EXTRA_ENV_SETTINGS "silent=y\0"
+#define CFG_EXTRA_ENV_SETTINGS "silent=y\0"
/* nand driver parameters */
#ifdef CONFIG_TARGET_PRESIDIO_ASIC
"ramdisk_addr_r=0x0a200000\0"
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
ENV_MEM_LAYOUT_SETTINGS \
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
"partitions=" PARTS_DEFAULT \
/* Use common default */
/* Default env settings */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hostname=pxm2\0" \
"ubi_off=2048\0"\
"nand_img_size=0x500000\0" \
#define CFG_SYS_BAUDRATE_TABLE { 115200, 230400, 460800, 921600 }
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootm_size=0x5000000\0" \
"bootm_low=0x80000000\0" \
"bootcmd=bootm $prevbl_initrd_start_addr\0"
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"fdt_addr=0x40000000\0" \
#define BOOTENV_DEV_NAME_QEMU(devtypeu, devtypel, instance) \
"qemu "
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0" \
"kernel_addr_r=0x84000000\0" \
#define EEPROM_ADDR_CHIP 0x120
/* Default env settings */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hostname=rastaban\0" \
"ubi_off=2048\0"\
"nand_img_size=0x400000\0" \
/* ENV setting */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootm_size=0x10000000\0"
#endif /* __RCAR_GEN3_COMMON_H */
/* Linux fails to load the fdt if it's loaded above 512M on a evb-rk3036 board,
* so limit the fdt reallocation to that */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
"fdt_high=0x7fffffff\0" \
"partitions=" PARTS_DEFAULT \
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_high=0x6fffffff\0" \
"initrd_high=0x6fffffff\0" \
"partitions=" PARTS_DEFAULT \
"ramdisk_addr_r=0x64000000\0"
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
ENV_MEM_LAYOUT_SETTINGS \
"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
"partitions=" PARTS_DEFAULT \
/* Linux fails to load the fdt if it's loaded above 256M on a Rock board,
* so limit the fdt reallocation to that */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
"fdt_high=0x6fffffff\0" \
"initrd_high=0x6fffffff\0" \
/* Linux fails to load the fdt if it's loaded above 512M on a evb-rk3036 board,
* so limit the fdt reallocation to that */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
"fdt_high=0x7fffffff\0" \
"partitions=" PARTS_DEFAULT \
/* Linux fails to load the fdt if it's loaded above 256M on a Rock 2 board, so
* limit the fdt reallocation to that */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_high=0x0fffffff\0" \
"initrd_high=0x0fffffff\0" \
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
"ramdisk_addr_r=0x04000000\0"
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
ENV_MEM_LAYOUT_SETTINGS \
"partitions=" PARTS_DEFAULT \
ROCKCHIP_DEVICE_SETTINGS \
"ramdisk_addr_r=0x06000000\0"
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
ENV_MEM_LAYOUT_SETTINGS \
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
"partitions=" PARTS_DEFAULT \
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
ENV_MEM_LAYOUT_SETTINGS \
BOOTENV
#include <config_distro_bootcmd.h>
#include <environment/distro/sf.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
ENV_MEM_LAYOUT_SETTINGS \
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
"partitions=" PARTS_DEFAULT \
"ramdisk_addr_r=0x0a200000\0"
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
ENV_MEM_LAYOUT_SETTINGS \
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
"partitions=" PARTS_DEFAULT \
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"dhcpuboot=usb start; dhcp u-boot.uimg; bootm\0" \
ENV_DEVICE_SETTINGS \
ENV_DFU_SETTINGS \
/* Use common default */
/* Default env settings */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hostname=rut\0" \
"ubi_off=2048\0"\
"nand_img_size=0x500000\0" \
"ramdisk_addr_r=0x64000000\0"
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
ENV_MEM_LAYOUT_SETTINGS \
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
"partitions=" PARTS_DEFAULT \
#define EXTRA_ENV_BOOT_LOGO EXTRA_ENV_DTB_RESERVE
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"rootdev=" __stringify(CONFIG_ROOT_DEV) "\0" \
#define COMMON_BOOT "${console} ${meminfo} ${mtdparts}"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"updateb=" \
"onenand erase 0x0 0x100000;" \
"onenand write 0x32008000 0x0 0x100000\0" \
",100M(swap)"\
",-(UMS)\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"updateb=" \
"onenand erase 0x0 0x100000;" \
"onenand write 0x42008000 0x0 0x100000\0" \
#define CFG_SYS_BAUDRATE_TABLE { 115200, 230400, 460800, 921600 }
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootm_size=0x4000000\0" \
"bootm_low=0x80000000\0" \
"stdout=vidconsole\0" \
/*
* Environment variables configurations
*/
-#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
+#define CFG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
"=ttyS0,115200 mtdparts=" CONFIG_MTDPARTS_DEFAULT \
"x_bootcmd_kernel=nand read 0x6400000 0x100000 0x400000\0" \
"x_bootcmd_usb=usb start\0" \
"name=loader2,size=4MB,type=${type_guid_gpt_loader2};" \
"name=system,size=-,bootable,type=${type_guid_gpt_system};"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_high=0xffffffffffffffff\0" \
"initrd_high=0xffffffffffffffff\0" \
"kernel_addr_r=0x84000000\0" \
"name=loader2,size=4MB,type=${type_guid_gpt_loader2};" \
"name=system,size=-,bootable,type=${type_guid_gpt_system};"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"kernel_addr_r=0x84000000\0" \
"kernel_comp_addr_r=0x88000000\0" \
"kernel_comp_size=0x4000000\0" \
/* Board Clock */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootm_size=0x10000000\0"
/* SPL support */
#define CFG_SYS_SDRAM_BASE 0x80000000
#define CFG_SYS_SDRAM_SIZE SZ_8M
-#ifndef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#ifndef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
"loadaddr=0x80060000\0" \
"fdt_addr_r=0x80400000\0" \
"scriptaddr=0x80020000\0" \
"stderr=serial\0"
/*
- * Override CONFIG_EXTRA_ENV_SETTINGS in x86-common.h
+ * Override CFG_EXTRA_ENV_SETTINGS in x86-common.h
*/
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
CONFIG_STD_DEVICES_SETTINGS \
"netdev=eth0\0" \
"consoledev=ttyS0\0" \
* Predefined environment variables.
* Usefull to define some easy to use boot commands.
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
\
"basicargs=console=ttyS0,115200\0" \
\
" mem=128M " \
" " CONFIG_MTDPARTS_DEFAULT
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"updateb=" \
"onenand erase 0x0 0x40000;" \
"onenand write 0x32008000 0x0 0x40000\0" \
/* MMC Config*/
#define CFG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"image=zImage\0" \
"console=ttymxc0\0" \
"fdtfile=imx7d-smegw01.dtb\0" \
/* Environment settings */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"ethaddr=00:00:00:00:00:00\0" \
"serial=0\0" \
"stdout=serial_atmel\0" \
* Environment
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"kernel_addr_r=0x82000000\0" \
"loadaddr=0x82000000\0" \
"fdt_addr_r=0x88000000\0" \
*/
#define CFG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200}
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"autoload=no\0" \
"bootargs=cma=256M console=ttyS1,115200 root=/dev/mmcblk0p3 rw rootwait\0" \
"distro_bootcmd=bridge enable; run bootcmd_mmc\0" \
#include <config_distro_bootcmd.h>
-#ifndef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#ifndef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
"bootm_size=0xa000000\0" \
"kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \
/* Environment is in MMC */
/* Extra Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"consdev=ttyS0\0" \
"baudrate=115200\0" \
"bootscript=boot.scr\0" \
/* Environment is in MMC */
/* Extra Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"consdev=ttyS0\0" \
"baudrate=115200\0" \
"bootscript=boot.scr\0" \
#include <configs/socfpga_soc64_common.h>
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"bootfile=" CONFIG_BOOTFILE "\0" \
"fdt_addr=1100000\0" \
/*
* Environment variable
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"bootfile=" CONFIG_BOOTFILE "\0" \
"fdt_addr=8000000\0" \
* Linux system after 5 seconds
*/
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"verify=n\0" \
"consdev=ttyS0\0" \
"baudrate=115200\0" \
#define CFG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"consdev=ttyS0\0" \
"uboot_file=/home/tftp/syscon3/u-boot.bin\0" \
#define CFG_SYS_FSL_USDHC_NUM 1
#endif /* CONFIG_FSL_USDHC */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootm_size=0x10000000\0" \
"console=ttymxc0\0" \
"initrd_addr=0x86800000\0" \
#define BOOTCMD_ENV \
"fastbootcmd=echo '*** FASTBOOT MODE ***'; fastboot usb 0\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BOOT_ENV \
CONSOLE_ENV \
FASTBOOT_ENV \
func(USB, usb, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"kernel_addr_r=0x40000000\0" \
"fdtfile=stih410-b2260.dtb\0" \
"fdt_addr_r=0x47000000\0" \
#define CFG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \
"bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
"bootm 0x08044000 - 0x08042000\0"
func(MMC, mmc, 0)
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"kernel_addr_r=0x00008000\0" \
"fdtfile=stm32429i-eval.dtb\0" \
"fdt_addr_r=0x00408000\0" \
func(MMC, mmc, 0)
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"kernel_addr_r=0x00008000\0" \
"fdtfile=stm32f469-disco.dtb\0" \
"fdt_addr_r=0x00408000\0" \
func(MMC, mmc, 0)
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"kernel_addr_r=0xC0008000\0" \
"fdtfile="CONFIG_DEFAULT_DEVICE_TREE".dtb\0" \
"fdt_addr_r=0xC0408000\0" \
func(MMC, mmc, 0)
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"kernel_addr_r=0xD0008000\0" \
"fdtfile=stm32h743i-disco.dtb\0" \
"fdt_addr_r=0xD0408000\0" \
func(MMC, mmc, 0)
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"kernel_addr_r=0xD0008000\0" \
"fdtfile=stm32h743i-eval.dtb\0" \
"fdt_addr_r=0xD0408000\0" \
func(MMC, mmc, 0)
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"kernel_addr_r=0xC0008000\0" \
"fdtfile=stm32h750i-art-pi.dtb\0" \
"fdt_addr_r=0xC0408000\0" \
"fdtoverlay_addr_r=" __FDTOVERLAY_ADDR_R "\0" \
"ramdisk_addr_r=" __RAMDISK_ADDR_R "\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
STM32MP_MEM_LAYOUT \
STM32MP_BOOTCMD \
BOOTENV \
"fdtoverlay_addr_r=" __FDTOVERLAY_ADDR_R "\0" \
"ramdisk_addr_r=" __RAMDISK_ADDR_R "\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
STM32MP_MEM_LAYOUT \
STM32MP_BOOTCMD \
STM32MP_PARTS_DEFAULT \
#define PHY_ANEG_TIMEOUT 20000
#ifdef CONFIG_SPL_BUILD
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"dfu_alt_info_ram=u-boot.itb ram " \
__stringify(CONFIG_SPL_LOAD_FIT_ADDRESS) \
" 0x800000\0"
230400, 460800, 921600, \
1000000, 2000000 }
-#ifdef CONFIG_EXTRA_ENV_SETTINGS
+#ifdef CFG_EXTRA_ENV_SETTINGS
/*
* default bootcmd for stm32mp1 STMicroelectronics boards:
* for serial/usb: execute the stm32prog command
"run distro_bootcmd;" \
"fi;\0"
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
STM32MP_MEM_LAYOUT \
ST_STM32MP1_BOOTCMD \
STM32MP_PARTS_DEFAULT \
#define LDS_BOARD_TEXT \
board/sysam/stmark2/sbf_dram_init.o (.text*)
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"kern_size=0x700000\0" \
"loadaddr=0x40001000\0" \
"-(rootfs)\0" \
/* Board Clock */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootm_size=0x10000000\0"
/* SPL support */
#define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb"
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
CONSOLE_ENV_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
MEM_LAYOUT_ENV_EXTRA_SETTINGS \
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_addr_r=0x9fe00000\0" \
"kernel_addr_r=0x90000000\0" \
"ramdisk_addr_r=0xa0000000\0" \
#ifndef __CONFIG_SYZYGY_HUB_H
#define __CONFIG_SYZYGY_HUB_H
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fit_image=fit.itb\0" \
"bitstream_image=download.bit\0" \
"loadbit_addr=0x1000000\0" \
/* bootstrap in spi flash , u-boot + env + linux in nandflash */
#if defined(CONFIG_BOARD_AXM)
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \
"${gatewayip}:${netmask}:${hostname}:${netdev}::off\0" \
"addtest=setenv bootargs ${bootargs} loglevel=4 test\0" \
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#endif /* CONFIG_CMD_USB */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
"bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
"bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
#define INITRD_HIGH "ffffffff"
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
TEGRA_DEVICE_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
"fdt_high=" FDT_HIGH "\0" \
func(PXE, pxe, 0)
#include <config_distro_bootcmd.h>
-#undef CONFIG_EXTRA_ENV_SETTINGS
+#undef CFG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"BOARD=ten64\0" \
"fdt_addr_r=0x90000000\0" \
"fdt_high=0xa0000000\0" \
/* Environment settings */
-#undef CONFIG_EXTRA_ENV_SETTINGS
+#undef CFG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"tftpdir=" DEF_ENV_TFTPDIR "\0" \
"eth_init=" DEF_ENV_ETH_INIT "\0" \
"ubuntu_part=" __stringify(DEF_ENV_UBUNTU_PART) "\0" \
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
/* Keep device tree and initrd in lower memory so the kernel can access them */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_high=0x10000000\0" \
"initrd_high=0x10000000\0"
#define EEPROM_ADDR_CHIP 0x120
/* Default env settings */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"hostname=thuban\0" \
"ubi_off=2048\0"\
"nand_img_size=0x400000\0" \
/* Initial environment variables */
#define UBOOT_IMG_HEAD_SIZE 0x40
/* C80000 - 0x40 */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"kernel_addr=08007ffc0\0" \
"fdt_addr=0x94C00000\0" \
"fdt_high=0x9fffffff\0"
#include <configs/ti_armv7_omap.h>
#include <asm/arch/omap.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV
/* Clock Defines */
"rproc load ${dev_pmmc} ${loadaddr} 0x${filesize}; " \
"rproc start ${dev_pmmc}\0" \
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
ENV_KS2_BOARD_SETTINGS \
DFUARGS \
#include <config_distro_bootcmd.h>
#include <environment/ti/mmc.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
DEFAULT_FIT_TI_ARGS \
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DEFAULT_LINUX_BOOT_ENV \
DEFAULT_MMC_TI_ARGS \
DEFAULT_FIT_TI_ARGS \
# define EXTRA_ENV_USB
#endif
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
"kernel_image=uImage\0" \
"kernel_addr=0x2080000\0" \
"ramdisk_image=uramdisk.image.gz\0" \
#define PHYS_SDRAM_2 0x8080000000
#define PHYS_SDRAM_2_SIZE 0x180000000
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootm_size=0x20000000\0" \
"load_addr=0xa0000000\0" \
"kernel_addr_r=0x80080000\0" \
/* set to a resonable value, changeable by user */
#define TQMA6_CMA_SIZE 160M
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"board=tqma6\0" \
"uimage=uImage\0" \
"zimage=zImage\0" \
"params.bin raw 0x38 0x8;" \
"/Image.itb ext4 0 2\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootk=" \
"run loaduimage;" \
"if run loaddtb; then " \
"params.bin raw 0x38 0x8;" \
"/Image.itb ext4 0 2\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootk=" \
"run loaduimage;" \
"if run loaddtb; then " \
"lzmadec 0x5000000 0x5800000 && " \
"bootm 0x5800000"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_addr=0x4c00000\0" \
"scriptaddr=0x4d00000\0" \
"pxefile_addr_r=0x4e00000\0" \
"fi; " \
"bootz 0x1000000"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
RELOCATION_LIMITS_ENV_SETTINGS \
LOAD_ADDRESS_ENV_SETTINGS \
"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
/* MMC Configuration */
#define CFG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"console=ttymxc1,115200\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
#define CONFIG_MXC_UART_BASE UART1_BASE
/* Linux only */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"console=ttymxc0,115200\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"run boot_common\0"
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_addr_r_offset=0x05100000\0" \
"kernel_addr_r_offset=" KERNEL_ADDR_R_OFFSET "\0" \
"ramdisk_addr_r_offset=0x06000000\0" \
#endif
/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
#endif
"pxefile_addr_r=0x70800000\0" \
"ramdisk_addr_r=0x73000000\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
"bootargs_default=root=/dev/mmcblk0p1 rootwait rw\0" \
"fdtfile=imx53-usbarmory.dtb\0" \
#error Unknown DDR size - please add!
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"loadaddr=0x81000000\0" \
"spi_image_off=0x00100000\0" \
"console=ttyS0,115200\0" \
#include <config_distro_bootcmd.h>
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
MEM_LAYOUT_ENV_SETTINGS \
"bootcmd_mfg=fastboot 0\0" \
#endif
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
MEM_LAYOUT_ENV_SETTINGS \
"bootcmd_mfg=fastboot 0\0" \
#include <config_distro_bootcmd.h>
/* Default load addresses and names for the different payloads. */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"kernel_addr_r=" __stringify(VEXPRESS_KERNEL_ADDR) "\0" \
"ramdisk_addr_r=" __stringify(VEXPRESS_RAMDISK_ADDR) "\0" \
"pxefile_addr_r=" __stringify(VEXPRESS_PXEFILE_ADDR) "\0" \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"kernel_addr_r=0x60100000\0" \
"fdt_addr_r=0x60000000\0" \
"bootargs=console=tty0 console=ttyAMA0,38400n8\0" \
"rdaddr=0x84080000\0" \
"ramdisk_addr_r=0x84080000\0"
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
/* Update the bootcommand according to our mapping for the VInCo platform */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"kernel_start=0x20000\0" \
"kernel_size=0x800000\0" \
"mmcblksize=0x200\0" \
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"console=ttymxc0\0" \
"splashpos=m,m\0" \
"splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
#define BOOT_SCR_STRING "source ${bootscriptaddr}\0"
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
CFG_DFU_ENV_SETTINGS \
"script=boot.scr\0" \
"bootscr_fitimage_name=bootscr\0" \
#include <asm/arch/config.h>
/* Keep device tree and initrd in low memory so the kernel can access them */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"fdt_high=0x10000000\0" \
"initrd_high=0x10000000\0"
#define SPLASH_SETTINGS
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
DISTRO_BOOTENV \
CONFIG_STD_DEVICES_SETTINGS \
SPLASH_SETTINGS \
/* Extra Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"bootmode=update\0" \
"bootpri=mmc_mmc\0" \
"bootsec=sf_swu\0" \
#include <linux/types.h>
#endif
-#define CONFIG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS
#undef CFG_SYS_SDRAM_BASE
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
"loadimage=ext4load pvblock 0 0x90000000 /boot/Image;\0" \
"pvblockboot=run loadimage;" \
"booti 0x90000000 - 0x88000000;\0"
#include <config_distro_bootcmd.h>
/* Initial environment variables */
-#ifndef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#ifndef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
ENV_MEM_LAYOUT_SETTINGS \
BOOTENV
#endif
#ifndef __CONFIG_VERSAL_MINI_H
#define __CONFIG_VERSAL_MINI_H
-#define CONFIG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS
#include <configs/xilinx_versal.h>
/* Undef unneeded configs */
-#undef CONFIG_EXTRA_ENV_SETTINGS
+#undef CFG_EXTRA_ENV_SETTINGS
#endif /* __CONFIG_VERSAL_MINI_H */
#include <config_distro_bootcmd.h>
/* Initial environment variables */
-#ifndef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#ifndef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
ENV_MEM_LAYOUT_SETTINGS \
BOOTENV \
DFU_ALT_INFO
#ifndef __CONFIG_VERSAL_NET_MINI_H
#define __CONFIG_VERSAL_NET_MINI_H
-#define CONFIG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS
#include <configs/xilinx_versal_net.h>
/* Undef unneeded configs */
-#undef CONFIG_EXTRA_ENV_SETTINGS
+#undef CFG_EXTRA_ENV_SETTINGS
#endif /* __CONFIG_VERSAL_NET_MINI_H */
#include <config_distro_bootcmd.h>
/* Initial environment variables */
-#ifndef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#ifndef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
ENV_MEM_LAYOUT_SETTINGS \
BOOTENV
#endif
/* SPL can't handle all huge variables - define just DFU */
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
-#undef CONFIG_EXTRA_ENV_SETTINGS
-# define CONFIG_EXTRA_ENV_SETTINGS \
+#undef CFG_EXTRA_ENV_SETTINGS
+# define CFG_EXTRA_ENV_SETTINGS \
"dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \
"atf-uboot.ub ram 0x10000000 0x1000000;" \
"Image ram 0x80000 0x3f80000;" \
#ifndef __CONFIG_ZYNQMP_MINI_H
#define __CONFIG_ZYNQMP_MINI_H
-#define CONFIG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS
#include <configs/xilinx_zynqmp.h>
/* Undef unneeded configs */
-#undef CONFIG_EXTRA_ENV_SETTINGS
+#undef CFG_EXTRA_ENV_SETTINGS
#endif /* __CONFIG_ZYNQMP_MINI_H */
#ifndef __CONFIG_ZYNQMP_R5_H
#define __CONFIG_ZYNQMP_R5_H
-#define CONFIG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS
/* Serial drivers */
/* The following table includes the supported baudrates */
#define CONFIG_FEC_ENET_DEV 0
#define CONFIG_FEC_MXC_PHYADDR 0x0
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
"console=ttymxc6\0" \
#endif /* CONFIG_SPL_BUILD */
/* Default environment */
-#ifndef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#ifndef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS \
"scriptaddr=0x20000\0" \
"script_size_f=0x40000\0" \
"fdt_addr_r=0x1f00000\0" \
#include <configs/zynq-common.h>
/* Undef unneeded configs */
-#undef CONFIG_EXTRA_ENV_SETTINGS
+#undef CFG_EXTRA_ENV_SETTINGS
#undef CFG_SYS_INIT_RAM_ADDR
#undef CFG_SYS_INIT_RAM_SIZE
/* This is created in the Makefile */
CONFIG_EXTRA_ENV_TEXT
#endif
-#ifdef CONFIG_EXTRA_ENV_SETTINGS
- CONFIG_EXTRA_ENV_SETTINGS
+#ifdef CFG_EXTRA_ENV_SETTINGS
+ CFG_EXTRA_ENV_SETTINGS
#endif
"\0"
#else /* CONFIG_USE_DEFAULT_ENV_FILE */
projects / u-boot.git / commitdiff