ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb \
ls1021a-iot-duart.dtb ls1021a-tsn.dtb
dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
+ fsl-ls2080a-qds-42-x.dtb \
fsl-ls2080a-rdb.dtb \
fsl-ls2081a-rdb.dtb \
fsl-ls2088a-rdb-qspi.dtb \
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LS2080AQDS device tree source for SERDES protocol 42.x
+ *
+ * Copyright 2020 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2080a-qds-sd1-42.dtsi"
+
+/ {
+ model = "NXP Layerscape LS2080AQDS Board (DTS 42-x)";
+ compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP LS2080aQDS device tree source for SERDES block #1 - protocol 42 (0x2a)
+ *
+ * Copyright 2020 NXP
+ */
+
+#include "fsl-ls2080a-qds.dtsi"
+
+&dpmac1 {
+ status = "okay";
+ phy-connection-type = "xfi";
+};
+
+&dpmac2 {
+ status = "okay";
+ phy-connection-type = "xfi";
+};
+
+&dpmac3 {
+ status = "okay";
+ phy-connection-type = "xfi";
+};
+
+&dpmac4 {
+ status = "okay";
+ phy-connection-type = "xfi";
+};
+
+&dpmac5 {
+ status = "okay";
+ phy-connection-type = "xfi";
+};
+
+&dpmac6 {
+ status = "okay";
+ phy-connection-type = "xfi";
+};
+
+&dpmac7 {
+ status = "okay";
+ phy-connection-type = "xfi";
+};
+
+&dpmac8 {
+ status = "okay";
+ phy-connection-type = "xfi";
+};
// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
- * Freescale ls2080a QDS board device tree source
+ * Freescale ls2080a QDS defaul board device tree source
*
* Copyright 2013-2015 Freescale Semiconductor, Inc.
*/
/dts-v1/;
-#include "fsl-ls2080a.dtsi"
+#include "fsl-ls2080a-qds.dtsi"
/ {
model = "Freescale Layerscape 2080a QDS Board";
spi1 = &dspi;
};
};
-
-&i2c0 {
- status = "okay";
- pca9547@77 {
- compatible = "nxp,pca9547";
- reg = <0x77>;
- #address-cells = <1>;
- #size-cells = <0>;
- i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x00>;
- rtc@68 {
- compatible = "dallas,ds3232";
- reg = <0x68>;
- };
- };
- };
-};
-
-&dspi {
- bus-num = <0>;
- status = "okay";
-
- dflash0: n25q128a {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <3000000>;
- spi-cpol;
- spi-cpha;
- reg = <0>;
- };
- dflash1: sst25wf040b {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <3000000>;
- spi-cpol;
- spi-cpha;
- reg = <1>;
- };
- dflash2: en25s64 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <3000000>;
- spi-cpol;
- spi-cpha;
- reg = <2>;
- };
-};
-
-&qspi {
- status = "okay";
-
- s25fs256s0: flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- reg = <0>;
- };
-};
-
-&sata {
- status = "okay";
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * Freescale ls2080a QDS common device tree source
+ *
+ * Copyright 2013-2015 Freescale Semiconductor, Inc.
+ * Copyright 2020 NXP
+ */
+
+#include "fsl-ls2080a.dtsi"
+
+&i2c0 {
+ status = "okay";
+ pca9547@77 {
+ compatible = "nxp,pca9547";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x00>;
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ };
+ };
+ };
+};
+
+&dspi {
+ bus-num = <0>;
+ status = "okay";
+
+ dflash0: n25q128a {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <3000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <0>;
+ };
+ dflash1: sst25wf040b {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <3000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <1>;
+ };
+ dflash2: en25s64 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <3000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <2>;
+ };
+};
+
+&qspi {
+ status = "okay";
+
+ s25fs256s0: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+};
+
+&sata {
+ status = "okay";
+};
mc_env_boot();
}
#endif /* CONFIG_RESET_PHY_R */
+
+#if defined(CONFIG_DM_ETH) && defined(CONFIG_MULTI_DTB_FIT)
+
+/* Structure to hold SERDES protocols supported in case of
+ * CONFIG_DM_ETH enabled (network interfaces are described in the DTS).
+ *
+ * @serdes_block: the index of the SERDES block
+ * @serdes_protocol: the decimal value of the protocol supported
+ * @dts_needed: DTS notes describing the current configuration are needed
+ *
+ * When dts_needed is true, the board_fit_config_name_match() function
+ * will try to exactly match the current configuration of the block with a DTS
+ * name provided.
+ */
+static struct serdes_configuration {
+ u8 serdes_block;
+ u32 serdes_protocol;
+ bool dts_needed;
+} supported_protocols[] = {
+ /* Serdes block #1 */
+ {1, 42, true},
+
+ /* Serdes block #2 */
+ {2, 65, false},
+};
+
+#define SUPPORTED_SERDES_PROTOCOLS ARRAY_SIZE(supported_protocols)
+
+static bool protocol_supported(u8 serdes_block, u32 protocol)
+{
+ struct serdes_configuration serdes_conf;
+ int i;
+
+ for (i = 0; i < SUPPORTED_SERDES_PROTOCOLS; i++) {
+ serdes_conf = supported_protocols[i];
+ if (serdes_conf.serdes_block == serdes_block &&
+ serdes_conf.serdes_protocol == protocol)
+ return true;
+ }
+
+ return false;
+}
+
+static void get_str_protocol(u8 serdes_block, u32 protocol, char *str)
+{
+ struct serdes_configuration serdes_conf;
+ int i;
+
+ for (i = 0; i < SUPPORTED_SERDES_PROTOCOLS; i++) {
+ serdes_conf = supported_protocols[i];
+ if (serdes_conf.serdes_block == serdes_block &&
+ serdes_conf.serdes_protocol == protocol) {
+ if (serdes_conf.dts_needed == true)
+ sprintf(str, "%u", protocol);
+ else
+ sprintf(str, "x");
+ return;
+ }
+ }
+}
+
+int board_fit_config_name_match(const char *name)
+{
+ struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 rcw_status = in_le32(&gur->rcwsr[28]);
+ char srds_s1_str[2], srds_s2_str[2];
+ u32 srds_s1, srds_s2;
+ char expected_dts[100];
+
+ srds_s1 = rcw_status & FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK;
+ srds_s1 >>= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
+
+ srds_s2 = rcw_status & FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK;
+ srds_s2 >>= FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT;
+
+ /* Check for supported protocols. The default DTS will be used
+ * in this case
+ */
+ if (!protocol_supported(1, srds_s1) ||
+ !protocol_supported(2, srds_s2))
+ return -1;
+
+ get_str_protocol(1, srds_s1, srds_s1_str);
+ get_str_protocol(2, srds_s2, srds_s2_str);
+
+ printf("expected_dts %s\n", expected_dts);
+ sprintf(expected_dts, "fsl-ls2080a-qds-%s-%s",
+ srds_s1_str, srds_s2_str);
+
+ if (!strcmp(name, expected_dts))
+ return 0;
+
+ printf("this is not!\n");
+ return -1;
+}
+
+#endif
projects / u-boot.git / commitdiff