offsetof(struct stm32mp1_ddrphy, x),\
offsetof(struct y, x)}
+#define DDR_REG_DYN(x) \
+ {#x,\
+ offsetof(struct stm32mp1_ddrctl, x),\
+ INVALID_OFFSET}
+
+#define DDRPHY_REG_DYN(x) \
+ {#x,\
+ offsetof(struct stm32mp1_ddrphy, x),\
+ INVALID_OFFSET}
+
/***********************************************************
* PARAMETERS: value get from device tree :
* size / order need to be aligned with binding
DDRPHY_REG_CAL(dx3dqstr),
};
+/**************************************************************
+ * DYNAMIC REGISTERS: only used for debug purpose (read/modify)
+ **************************************************************/
+#ifdef CONFIG_STM32MP1_DDR_INTERACTIVE
+static const struct reg_desc ddr_dyn[] = {
+ DDR_REG_DYN(stat),
+ DDR_REG_DYN(init0),
+ DDR_REG_DYN(dfimisc),
+ DDR_REG_DYN(dfistat),
+ DDR_REG_DYN(swctl),
+ DDR_REG_DYN(swstat),
+ DDR_REG_DYN(pctrl_0),
+ DDR_REG_DYN(pctrl_1),
+};
+
+#define DDR_REG_DYN_SIZE ARRAY_SIZE(ddr_dyn)
+
+static const struct reg_desc ddrphy_dyn[] = {
+ DDRPHY_REG_DYN(pir),
+ DDRPHY_REG_DYN(pgsr),
+ DDRPHY_REG_DYN(zq0sr0),
+ DDRPHY_REG_DYN(zq0sr1),
+ DDRPHY_REG_DYN(dx0gsr0),
+ DDRPHY_REG_DYN(dx0gsr1),
+ DDRPHY_REG_DYN(dx1gsr0),
+ DDRPHY_REG_DYN(dx1gsr1),
+ DDRPHY_REG_DYN(dx2gsr0),
+ DDRPHY_REG_DYN(dx2gsr1),
+ DDRPHY_REG_DYN(dx3gsr0),
+ DDRPHY_REG_DYN(dx3gsr1),
+};
+
+#define DDRPHY_REG_DYN_SIZE ARRAY_SIZE(ddrphy_dyn)
+
+#endif
+
/*****************************************************************
* REGISTERS ARRAY: used to parse device tree and interactive mode
*****************************************************************/
REGPHY_REG,
REGPHY_TIMING,
REGPHY_CAL,
+#ifdef CONFIG_STM32MP1_DDR_INTERACTIVE
+/* dynamic registers => managed in driver or not changed,
+ * can be dumped in interactive mode
+ */
+ REG_DYN,
+ REGPHY_DYN,
+#endif
REG_TYPE_NB
};
"timing", ddrphy_timing, DDRPHY_REG_TIMING_SIZE, DDRPHY_BASE},
[REGPHY_CAL] = {
"cal", ddrphy_cal, DDRPHY_REG_CAL_SIZE, DDRPHY_BASE},
+#ifdef CONFIG_STM32MP1_DDR_INTERACTIVE
+[REG_DYN] = {
+ "dyn", ddr_dyn, DDR_REG_DYN_SIZE, DDR_BASE},
+[REGPHY_DYN] = {
+ "dyn", ddrphy_dyn, DDRPHY_REG_DYN_SIZE, DDRPHY_BASE},
+#endif
+
};
const char *base_name[] = {
}
}
+#ifdef CONFIG_STM32MP1_DDR_INTERACTIVE
+static void stm32mp1_dump_reg_desc(u32 base_addr, const struct reg_desc *desc)
+{
+ unsigned int *ptr;
+
+ ptr = (unsigned int *)(base_addr + desc->offset);
+ printf("%s= 0x%08x\n", desc->name, readl(ptr));
+}
+
+static void stm32mp1_dump_param_desc(u32 par_addr, const struct reg_desc *desc)
+{
+ unsigned int *ptr;
+
+ ptr = (unsigned int *)(par_addr + desc->par_offset);
+ printf("%s= 0x%08x\n", desc->name, readl(ptr));
+}
+
+static const struct reg_desc *found_reg(const char *name, enum reg_type *type)
+{
+ unsigned int i, j;
+ const struct reg_desc *desc;
+
+ for (i = 0; i < ARRAY_SIZE(ddr_registers); i++) {
+ desc = ddr_registers[i].desc;
+ for (j = 0; j < ddr_registers[i].size; j++) {
+ if (strcmp(name, desc[j].name) == 0) {
+ *type = i;
+ return &desc[j];
+ }
+ }
+ }
+ *type = REG_TYPE_NB;
+ return NULL;
+}
+
+int stm32mp1_dump_reg(const struct ddr_info *priv,
+ const char *name)
+{
+ unsigned int i, j;
+ const struct reg_desc *desc;
+ u32 base_addr;
+ enum base_type p_base;
+ enum reg_type type;
+ const char *p_name;
+ enum base_type filter = NONE_BASE;
+ int result = -1;
+
+ if (name) {
+ if (strcmp(name, base_name[DDR_BASE]) == 0)
+ filter = DDR_BASE;
+ else if (strcmp(name, base_name[DDRPHY_BASE]) == 0)
+ filter = DDRPHY_BASE;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(ddr_registers); i++) {
+ p_base = ddr_registers[i].base;
+ p_name = ddr_registers[i].name;
+ if (!name || (filter == p_base || !strcmp(name, p_name))) {
+ result = 0;
+ desc = ddr_registers[i].desc;
+ base_addr = get_base_addr(priv, p_base);
+ printf("==%s.%s==\n", base_name[p_base], p_name);
+ for (j = 0; j < ddr_registers[i].size; j++)
+ stm32mp1_dump_reg_desc(base_addr, &desc[j]);
+ }
+ }
+ if (result) {
+ desc = found_reg(name, &type);
+ if (desc) {
+ p_base = ddr_registers[type].base;
+ base_addr = get_base_addr(priv, p_base);
+ stm32mp1_dump_reg_desc(base_addr, desc);
+ result = 0;
+ }
+ }
+ return result;
+}
+
+void stm32mp1_edit_reg(const struct ddr_info *priv,
+ char *name, char *string)
+{
+ unsigned long *ptr, value;
+ enum reg_type type;
+ enum base_type base;
+ const struct reg_desc *desc;
+ u32 base_addr;
+
+ desc = found_reg(name, &type);
+
+ if (!desc) {
+ printf("%s not found\n", name);
+ return;
+ }
+ if (strict_strtoul(string, 16, &value) < 0) {
+ printf("invalid value %s\n", string);
+ return;
+ }
+ base = ddr_registers[type].base;
+ base_addr = get_base_addr(priv, base);
+ ptr = (unsigned long *)(base_addr + desc->offset);
+ writel(value, ptr);
+ printf("%s= 0x%08x\n", desc->name, readl(ptr));
+}
+
+static u32 get_par_addr(const struct stm32mp1_ddr_config *config,
+ enum reg_type type)
+{
+ u32 par_addr = 0x0;
+
+ switch (type) {
+ case REG_REG:
+ par_addr = (u32)&config->c_reg;
+ break;
+ case REG_TIMING:
+ par_addr = (u32)&config->c_timing;
+ break;
+ case REG_PERF:
+ par_addr = (u32)&config->c_perf;
+ break;
+ case REG_MAP:
+ par_addr = (u32)&config->c_map;
+ break;
+ case REGPHY_REG:
+ par_addr = (u32)&config->p_reg;
+ break;
+ case REGPHY_TIMING:
+ par_addr = (u32)&config->p_timing;
+ break;
+ case REGPHY_CAL:
+ par_addr = (u32)&config->p_cal;
+ break;
+ case REG_DYN:
+ case REGPHY_DYN:
+ case REG_TYPE_NB:
+ par_addr = (u32)NULL;
+ break;
+ }
+
+ return par_addr;
+}
+
+int stm32mp1_dump_param(const struct stm32mp1_ddr_config *config,
+ const char *name)
+{
+ unsigned int i, j;
+ const struct reg_desc *desc;
+ u32 par_addr;
+ enum base_type p_base;
+ enum reg_type type;
+ const char *p_name;
+ enum base_type filter = NONE_BASE;
+ int result = -EINVAL;
+
+ if (name) {
+ if (strcmp(name, base_name[DDR_BASE]) == 0)
+ filter = DDR_BASE;
+ else if (strcmp(name, base_name[DDRPHY_BASE]) == 0)
+ filter = DDRPHY_BASE;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(ddr_registers); i++) {
+ par_addr = get_par_addr(config, i);
+ if (!par_addr)
+ continue;
+ p_base = ddr_registers[i].base;
+ p_name = ddr_registers[i].name;
+ if (!name || (filter == p_base || !strcmp(name, p_name))) {
+ result = 0;
+ desc = ddr_registers[i].desc;
+ printf("==%s.%s==\n", base_name[p_base], p_name);
+ for (j = 0; j < ddr_registers[i].size; j++)
+ stm32mp1_dump_param_desc(par_addr, &desc[j]);
+ }
+ }
+ if (result) {
+ desc = found_reg(name, &type);
+ if (desc) {
+ par_addr = get_par_addr(config, type);
+ if (par_addr) {
+ stm32mp1_dump_param_desc(par_addr, desc);
+ result = 0;
+ }
+ }
+ }
+ return result;
+}
+
+void stm32mp1_edit_param(const struct stm32mp1_ddr_config *config,
+ char *name, char *string)
+{
+ unsigned long *ptr, value;
+ enum reg_type type;
+ const struct reg_desc *desc;
+ u32 par_addr;
+
+ desc = found_reg(name, &type);
+ if (!desc) {
+ printf("%s not found\n", name);
+ return;
+ }
+ if (strict_strtoul(string, 16, &value) < 0) {
+ printf("invalid value %s\n", string);
+ return;
+ }
+ par_addr = get_par_addr(config, type);
+ if (!par_addr) {
+ printf("no parameter %s\n", name);
+ return;
+ }
+ ptr = (unsigned long *)(par_addr + desc->par_offset);
+ writel(value, ptr);
+ printf("%s= 0x%08x\n", desc->name, readl(ptr));
+}
+#endif
+
+__weak bool stm32mp1_ddr_interactive(void *priv,
+ enum stm32mp1_ddr_interact_step step,
+ const struct stm32mp1_ddr_config *config)
+{
+ return false;
+}
+
+#define INTERACTIVE(step)\
+ stm32mp1_ddr_interactive(priv, step, config)
+
static void ddrphy_idone_wait(struct stm32mp1_ddrphy *phy)
{
u32 pgsr;
if (ret)
panic("ddr power init failed\n");
+start:
debug("name = %s\n", config->info.name);
debug("speed = %d kHz\n", config->info.speed);
debug("size = 0x%x\n", config->info.size);
udelay(2);
/* for PCLK = 133MHz => 1 us is enough, 2 to allow lower frequency */
+ if (INTERACTIVE(STEP_DDR_RESET))
+ goto start;
+
/* 1.5. initialize registers ddr_umctl2 */
/* Stop uMCTL2 before PHY is ready */
clrbits_le32(&priv->ctl->dfimisc, DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN);
set_reg(priv, REG_PERF, &config->c_perf);
+ if (INTERACTIVE(STEP_CTL_INIT))
+ goto start;
+
/* 2. deassert reset signal core_ddrc_rstn, aresetn and presetn */
clrbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DDRCORERST);
clrbits_le32(priv->rcc + RCC_DDRITFCR, RCC_DDRITFCR_DDRCAXIRST);
set_reg(priv, REGPHY_TIMING, &config->p_timing);
set_reg(priv, REGPHY_CAL, &config->p_cal);
+ if (INTERACTIVE(STEP_PHY_INIT))
+ goto start;
+
/* 4. Monitor PHY init status by polling PUBL register PGSR.IDONE
* Perform DDR PHY DRAM initialization and Gate Training Evaluation
*/
/* enable uMCTL2 AXI port 0 and 1 */
setbits_le32(&priv->ctl->pctrl_0, DDRCTRL_PCTRL_N_PORT_EN);
setbits_le32(&priv->ctl->pctrl_1, DDRCTRL_PCTRL_N_PORT_EN);
+
+ if (INTERACTIVE(STEP_DDR_READY))
+ goto start;
}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common.h>
+#include <console.h>
+#include <cli.h>
+#include <clk.h>
+#include <malloc.h>
+#include <ram.h>
+#include <reset.h>
+#include "stm32mp1_ddr.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+enum ddr_command {
+ DDR_CMD_HELP,
+ DDR_CMD_INFO,
+ DDR_CMD_FREQ,
+ DDR_CMD_RESET,
+ DDR_CMD_PARAM,
+ DDR_CMD_PRINT,
+ DDR_CMD_EDIT,
+ DDR_CMD_STEP,
+ DDR_CMD_NEXT,
+ DDR_CMD_GO,
+ DDR_CMD_TEST,
+ DDR_CMD_TUNING,
+ DDR_CMD_UNKNOWN,
+};
+
+const char *step_str[] = {
+ [STEP_DDR_RESET] = "DDR_RESET",
+ [STEP_CTL_INIT] = "DDR_CTRL_INIT_DONE",
+ [STEP_PHY_INIT] = "DDR PHY_INIT_DONE",
+ [STEP_DDR_READY] = "DDR_READY",
+ [STEP_RUN] = "RUN"
+};
+
+enum ddr_command stm32mp1_get_command(char *cmd, int argc)
+{
+ const char *cmd_string[DDR_CMD_UNKNOWN] = {
+ [DDR_CMD_HELP] = "help",
+ [DDR_CMD_INFO] = "info",
+ [DDR_CMD_FREQ] = "freq",
+ [DDR_CMD_RESET] = "reset",
+ [DDR_CMD_PARAM] = "param",
+ [DDR_CMD_PRINT] = "print",
+ [DDR_CMD_EDIT] = "edit",
+ [DDR_CMD_STEP] = "step",
+ [DDR_CMD_NEXT] = "next",
+ [DDR_CMD_GO] = "go",
+ };
+ /* min and max number of argument */
+ const char cmd_arg[DDR_CMD_UNKNOWN][2] = {
+ [DDR_CMD_HELP] = { 0, 0 },
+ [DDR_CMD_INFO] = { 0, 255 },
+ [DDR_CMD_FREQ] = { 0, 1 },
+ [DDR_CMD_RESET] = { 0, 0 },
+ [DDR_CMD_PARAM] = { 0, 2 },
+ [DDR_CMD_PRINT] = { 0, 1 },
+ [DDR_CMD_EDIT] = { 2, 2 },
+ [DDR_CMD_STEP] = { 0, 1 },
+ [DDR_CMD_NEXT] = { 0, 0 },
+ [DDR_CMD_GO] = { 0, 0 },
+ };
+ int i;
+
+ for (i = 0; i < DDR_CMD_UNKNOWN; i++)
+ if (!strcmp(cmd, cmd_string[i])) {
+ if (argc - 1 < cmd_arg[i][0]) {
+ printf("no enought argument (min=%d)\n",
+ cmd_arg[i][0]);
+ return DDR_CMD_UNKNOWN;
+ } else if (argc - 1 > cmd_arg[i][1]) {
+ printf("too many argument (max=%d)\n",
+ cmd_arg[i][1]);
+ return DDR_CMD_UNKNOWN;
+ } else {
+ return i;
+ }
+ }
+
+ printf("unknown command %s\n", cmd);
+ return DDR_CMD_UNKNOWN;
+}
+
+static void stm32mp1_do_usage(void)
+{
+ const char *usage = {
+ "commands:\n\n"
+ "help displays help\n"
+ "info displays DDR information\n"
+ "info <param> <val> changes DDR information\n"
+ " with <param> = step, name, size or speed\n"
+ "freq displays the DDR PHY frequency in kHz\n"
+ "freq <freq> changes the DDR PHY frequency\n"
+ "param [type|reg] prints input parameters\n"
+ "param <reg> <val> edits parameters in step 0\n"
+ "print [type|reg] dumps registers\n"
+ "edit <reg> <val> modifies one register\n"
+ "step lists the available step\n"
+ "step <n> go to the step <n>\n"
+ "next goes to the next step\n"
+ "go continues the U-Boot SPL execution\n"
+ "reset reboots machine\n"
+ "\nwith for [type|reg]:\n"
+ " all registers if absent\n"
+ " <type> = ctl, phy\n"
+ " or one category (static, timing, map, perf, cal, dyn)\n"
+ " <reg> = name of the register\n"
+ };
+
+ puts(usage);
+}
+
+static bool stm32mp1_check_step(enum stm32mp1_ddr_interact_step step,
+ enum stm32mp1_ddr_interact_step expected)
+{
+ if (step != expected) {
+ printf("invalid step %d:%s expecting %d:%s\n",
+ step, step_str[step],
+ expected,
+ step_str[expected]);
+ return false;
+ }
+ return true;
+}
+
+static void stm32mp1_do_info(struct ddr_info *priv,
+ struct stm32mp1_ddr_config *config,
+ enum stm32mp1_ddr_interact_step step,
+ int argc, char * const argv[])
+{
+ unsigned long value;
+ static char *ddr_name;
+
+ if (argc == 1) {
+ printf("step = %d : %s\n", step, step_str[step]);
+ printf("name = %s\n", config->info.name);
+ printf("size = 0x%x\n", config->info.size);
+ printf("speed = %d kHz\n", config->info.speed);
+ return;
+ }
+
+ if (argc < 3) {
+ printf("no enought parameter\n");
+ return;
+ }
+ if (!strcmp(argv[1], "name")) {
+ u32 i, name_len = 0;
+
+ for (i = 2; i < argc; i++)
+ name_len += strlen(argv[i]) + 1;
+ if (ddr_name)
+ free(ddr_name);
+ ddr_name = malloc(name_len);
+ config->info.name = ddr_name;
+ if (!ddr_name) {
+ printf("alloc error, length %d\n", name_len);
+ return;
+ }
+ strcpy(ddr_name, argv[2]);
+ for (i = 3; i < argc; i++) {
+ strcat(ddr_name, " ");
+ strcat(ddr_name, argv[i]);
+ }
+ printf("name = %s\n", ddr_name);
+ return;
+ }
+ if (!strcmp(argv[1], "size")) {
+ if (strict_strtoul(argv[2], 16, &value) < 0) {
+ printf("invalid value %s\n", argv[2]);
+ } else {
+ config->info.size = value;
+ printf("size = 0x%x\n", config->info.size);
+ }
+ return;
+ }
+ if (!strcmp(argv[1], "speed")) {
+ if (strict_strtoul(argv[2], 10, &value) < 0) {
+ printf("invalid value %s\n", argv[2]);
+ } else {
+ config->info.speed = value;
+ printf("speed = %d kHz\n", config->info.speed);
+ value = clk_get_rate(&priv->clk);
+ printf("DDRPHY = %ld kHz\n", value / 1000);
+ }
+ return;
+ }
+ printf("argument %s invalid\n", argv[1]);
+}
+
+static bool stm32mp1_do_freq(struct ddr_info *priv,
+ int argc, char * const argv[])
+{
+ unsigned long ddrphy_clk;
+
+ if (argc == 2) {
+ if (strict_strtoul(argv[1], 0, &ddrphy_clk) < 0) {
+ printf("invalid argument %s", argv[1]);
+ return false;
+ }
+ if (clk_set_rate(&priv->clk, ddrphy_clk * 1000)) {
+ printf("ERROR: update failed!\n");
+ return false;
+ }
+ }
+ ddrphy_clk = clk_get_rate(&priv->clk);
+ printf("DDRPHY = %ld kHz\n", ddrphy_clk / 1000);
+ if (argc == 2)
+ return true;
+ return false;
+}
+
+static void stm32mp1_do_param(enum stm32mp1_ddr_interact_step step,
+ const struct stm32mp1_ddr_config *config,
+ int argc, char * const argv[])
+{
+ switch (argc) {
+ case 1:
+ stm32mp1_dump_param(config, NULL);
+ break;
+ case 2:
+ if (stm32mp1_dump_param(config, argv[1]))
+ printf("invalid argument %s\n",
+ argv[1]);
+ break;
+ case 3:
+ if (!stm32mp1_check_step(step, STEP_DDR_RESET))
+ return;
+ stm32mp1_edit_param(config, argv[1], argv[2]);
+ break;
+ }
+}
+
+static void stm32mp1_do_print(struct ddr_info *priv,
+ int argc, char * const argv[])
+{
+ switch (argc) {
+ case 1:
+ stm32mp1_dump_reg(priv, NULL);
+ break;
+ case 2:
+ if (stm32mp1_dump_reg(priv, argv[1]))
+ printf("invalid argument %s\n",
+ argv[1]);
+ break;
+ }
+}
+
+static int stm32mp1_do_step(enum stm32mp1_ddr_interact_step step,
+ int argc, char * const argv[])
+{
+ int i;
+ unsigned long value;
+
+ switch (argc) {
+ case 1:
+ for (i = 0; i < ARRAY_SIZE(step_str); i++)
+ printf("%d:%s\n", i, step_str[i]);
+ break;
+
+ case 2:
+ if ((strict_strtoul(argv[1], 0,
+ &value) < 0) ||
+ value >= ARRAY_SIZE(step_str)) {
+ printf("invalid argument %s\n",
+ argv[1]);
+ goto end;
+ }
+
+ if (value != STEP_DDR_RESET &&
+ value <= step) {
+ printf("invalid target %d:%s, current step is %d:%s\n",
+ (int)value, step_str[value],
+ step, step_str[step]);
+ goto end;
+ }
+ printf("step to %d:%s\n",
+ (int)value, step_str[value]);
+ return (int)value;
+ };
+
+end:
+ return step;
+}
+
+bool stm32mp1_ddr_interactive(void *priv,
+ enum stm32mp1_ddr_interact_step step,
+ const struct stm32mp1_ddr_config *config)
+{
+ const char *prompt = "DDR>";
+ char buffer[CONFIG_SYS_CBSIZE];
+ char *argv[CONFIG_SYS_MAXARGS + 1]; /* NULL terminated */
+ int argc;
+ static int next_step = -1;
+
+ if (next_step < 0 && step == STEP_DDR_RESET) {
+#ifdef CONFIG_STM32MP1_DDR_INTERACTIVE_FORCE
+ gd->flags &= ~(GD_FLG_SILENT |
+ GD_FLG_DISABLE_CONSOLE);
+ next_step = STEP_DDR_RESET;
+#else
+ unsigned long start = get_timer(0);
+
+ while (1) {
+ if (tstc() && (getc() == 'd')) {
+ next_step = STEP_DDR_RESET;
+ break;
+ }
+ if (get_timer(start) > 100)
+ break;
+ }
+#endif
+ }
+
+ debug("** step %d ** %s / %d\n", step, step_str[step], next_step);
+
+ if (next_step < 0)
+ return false;
+
+ if (step < 0 || step > ARRAY_SIZE(step_str)) {
+ printf("** step %d ** INVALID\n", step);
+ return false;
+ }
+
+ printf("%d:%s\n", step, step_str[step]);
+ printf("%s\n", prompt);
+
+ if (next_step > step)
+ return false;
+
+ while (next_step == step) {
+ cli_readline_into_buffer(prompt, buffer, 0);
+ argc = cli_simple_parse_line(buffer, argv);
+ if (!argc)
+ continue;
+
+ switch (stm32mp1_get_command(argv[0], argc)) {
+ case DDR_CMD_HELP:
+ stm32mp1_do_usage();
+ break;
+
+ case DDR_CMD_INFO:
+ stm32mp1_do_info(priv,
+ (struct stm32mp1_ddr_config *)config,
+ step, argc, argv);
+ break;
+
+ case DDR_CMD_FREQ:
+ if (stm32mp1_do_freq(priv, argc, argv))
+ next_step = STEP_DDR_RESET;
+ break;
+
+ case DDR_CMD_RESET:
+ do_reset(NULL, 0, 0, NULL);
+ break;
+
+ case DDR_CMD_PARAM:
+ stm32mp1_do_param(step, config, argc, argv);
+ break;
+
+ case DDR_CMD_PRINT:
+ stm32mp1_do_print(priv, argc, argv);
+ break;
+
+ case DDR_CMD_EDIT:
+ stm32mp1_edit_reg(priv, argv[1], argv[2]);
+ break;
+
+ case DDR_CMD_GO:
+ next_step = STEP_RUN;
+ break;
+
+ case DDR_CMD_NEXT:
+ next_step = step + 1;
+ break;
+
+ case DDR_CMD_STEP:
+ next_step = stm32mp1_do_step(step, argc, argv);
+ break;
+
+ default:
+ break;
+ }
+ }
+ return next_step == STEP_DDR_RESET;
+}
projects / u-boot.git / commitdiff