Ye Li [Mon, 16 Aug 2021 10:44:30 +0000 (18:44 +0800)]
imx8mp_evk: Remove EQoS PHY reset codes
Since we uses the DTS and PHY reset gpio in EQoS driver to do the
reset, remove the duplicated codes from board file.
Signed-off-by: Ye Li <ye.li@nxp.com>
Ye Li [Mon, 16 Aug 2021 10:44:29 +0000 (18:44 +0800)]
imx8mp_evk: Fix incorrect cascade for FEC and EQOS setup
The setup functions should be independent for two ethernet controllers
Signed-off-by: Ye Li <ye.li@nxp.com>
Ye Li [Mon, 16 Aug 2021 10:44:28 +0000 (18:44 +0800)]
arm: dts: imx8mp-evk: Enable the EQoS ethernet port
i.MX8MP EVK has two ethernet ports. Add relevant nodes and properties
for EQoS port to the EVK DTS file.
In -u-boot.dtsi, change the u-boot eqos compatible string, add PHY
reset gpio and remove assigned clocks as not supported in CCF.
Signed-off-by: Ye Li <ye.li@nxp.com>
Ye Li [Mon, 16 Aug 2021 10:44:27 +0000 (18:44 +0800)]
arm: mach-imx: Allow to build mac.c for EQoS driver
i.MX8MP has one DWC EQoS controller, so allow to build mac.c when
only this driver is enabled.
Signed-off-by: Ye Li <ye.li@nxp.com>
Ye Li [Mon, 16 Aug 2021 10:44:26 +0000 (18:44 +0800)]
arm: mach-imx: Update MAC fuse for i.MX8MP
i.MX8MP has two ENET controllers, have to update the function to
enable loading two MAC addresses.
Signed-off-by: Ye Li <ye.li@nxp.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Stefano Babic [Thu, 21 Oct 2021 11:57:38 +0000 (13:57 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot
Signed-off-by: Stefano Babic <sbabic@denx.de>
Tom Rini [Wed, 20 Oct 2021 18:24:09 +0000 (14:24 -0400)]
Merge tag 'u-boot-imx-
20211020' of https://source.denx.de/u-boot/custodians/u-boot-imx
u-boot-imx-
20211020
-------------------
First PR from u-boot-imx for 2022.01
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9535
- new board: kontron-sl-mx8mm
- imx8m:
- fix secure boot
- imx ESDHC: fixes
- i.MX53: Support thum2, bmode and fixes for Menlo board
usbarmory switch to Ethernet driver model
- imx6 :
- DDR calibration for Toradex boards
- imx7:
- Fixes
- Updated gateworks boards (ventana / venice)
# gpg verification failed.
Tom Rini [Wed, 20 Oct 2021 18:23:08 +0000 (14:23 -0400)]
Merge https://source.denx.de/u-boot/custodians/u-boot-riscv
- Assorted warning fixes, io read/write bugfix
Marek Vasut [Tue, 10 Aug 2021 19:12:50 +0000 (21:12 +0200)]
doc: imx: psb: Add documentation for MX8MM behavior with Fast Boot fuse blown
On iMX8MM with Fast Boot fuse blown, the SIT and A-copy image are
placed at different offset than on iMX8MM with Fast Boot fuse NOT
blown. List both options and both offsets to avoid confusion.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Marek Vasut [Tue, 10 Aug 2021 19:12:49 +0000 (21:12 +0200)]
doc: imx: psb: Fix PERSIST_SECONDARY_BOOT bit location in GPR10
The PERSIST_SECONDARY_BOOT is in GPR10 address 0x30390098, adjust the
text which currently says it is in GPR0 while using the correct address
of GPR10.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Max Krummenacher [Wed, 6 Oct 2021 16:55:36 +0000 (18:55 +0200)]
colibri-imx6ull: add emmc variant
Add code to build the eMMC variant of the Colibri iMX6ULL, i.e. the
'Colibri iMX6ULL 1GB' which has a eMMC instead of the raw NAND used
on other SKUs.
Related-to: ELB-4056, ELB-4057
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Philippe Schenker [Wed, 6 Oct 2021 16:55:35 +0000 (18:55 +0200)]
colibri-imx6ull: imximage.cfg: integrate new 1GiB RAM variant
Integrate new Toradex SKU 0062 Colibri iMX6ULL 1GB IT. This commit
basically adjusts three parameters of the RAM settings:
Increase density from 4Gb to 8Gb
Increase ROW address from 15 to 16
Increase tRFC (refresh command time) from 260 to 350
This timing is valid for all Toradex Colibri iMX6ULL SKUs
Related-to: ELB-4055, ELB-4057
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Marcel Ziswiler [Wed, 6 Oct 2021 16:55:34 +0000 (18:55 +0200)]
toradex: tdx-cfg-block: add new i.mx 6ull and 8m plus skus
Add new i.MX 6ULL and 8M Plus SKUs to ConfigBlock handling:
0062: Colibri iMX6ULL 1GB IT (eMMC)
0063: Verdin iMX8M Plus Quad 4GB IT
0064: Verdin iMX8M Plus Quad 2GB Wi-Fi / BT IT
0065: Verdin iMX8M Plus QuadLite 1GB IT
0066: Verdin iMX8M Plus Quad 8GB Wi-Fi / BT
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Denys Drozdov [Wed, 6 Oct 2021 16:55:33 +0000 (18:55 +0200)]
toradex: configblock: fix interactive mode it handling
Restore "Is the module an IT version? [y/N]" for "cfgblock create"
interactive mode command, which was leading to invalid detection
of 0051 Colibri iMX8DX 1GB WB module;
Fixes: a5b5ad4d859b ("toradex: tdx-cfg-clock: add new i.mx 8m mini/plus skus")
Related-to: ELB-3482
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Marcel Ziswiler [Wed, 6 Oct 2021 16:55:32 +0000 (18:55 +0200)]
toradex: take over maintainership
Also take over maintainership of remaining Toradex SoMs as Oleksandr
has left our company.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
CC: Oleksandr Suvorov <cryosay@gmail.com>
Fabio Estevam [Mon, 23 Aug 2021 12:56:42 +0000 (09:56 -0300)]
imx8mm-evk: Generate a single bootable flash.bin again
After the conversion to binman in commit
8996e6b7c6a1 ("imx8mm_evk: switch
to use binman to pack images"), it is necessary to flash both flash.bin and
u-boot.itb to get a bootable system. Prior to this commit, only flash.bin
was needed.
Such new requirement breaks existing distro mechanisms to generate the
final binary because the extra u-boot.itb is now required.
Generate a final flash.bin that can be used again as a single
bootable binary to keep the original behavior.
After this change the SPL binary is called spl.bin, which is a more
descriptive name for its purpose, and can still be used standalone
(for example, for secure boot purposes).
Also update imx8mm_evk.rst to remove the u-boot.itb copy step.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Philippe Schenker [Fri, 15 Oct 2021 08:25:51 +0000 (10:25 +0200)]
colibri-imx6ull: fix setup of nand gpmi clock
NXP used to setup the gpmi clock root from gpmi_clk in early versions
in their downstream BSP. [1]
However on mainline the gpmi clock root was always setup from enfc
since the beginning of the i.MX 6 series SoCs, which is still the same
today. [2]
NXP followed the mainline approach at some point and changed
setup_gpmi_io_clk to setup gpmi clock root from enfc which left faulty
code behind in our board file. [3]
This commit follows the change of NXP as it improves the performance of
the NAND from ~1.2 MiB/s to ~12 MiB/s. [3]
This change was verified to work in recovery-mode and u-boot loaded
from NAND on all four Colibri iMX6ULL SKUs from Toradex.
The frequency used to read the NAND, measured on RE# (Read Enable):
before this patch: 1.4 MHz
after this patch: 22 MHz
in Linux Kernel: 50 MHz
[1] https://source.codeaurora.org/external/imx/uboot-imx/tree/arch/arm/cpu/armv7/mx6/clock.c?h=nxp/imx_v2016.03_4.1.15_2.0.0_ga#n62
[2] commit
23608e23fd65 ("i.mx: add the initial support for freescale i.MX6Q processor")
[3] https://source.codeaurora.org/external/imx/uboot-imx/commit/?id=
7a82a19ceabfb04bbc1591a67c99751748781c7d
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Teresa Remmet [Wed, 6 Oct 2021 09:56:54 +0000 (11:56 +0200)]
board: phytec: imx8mm-phycore: Switch to binman
Use binman for image creation.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Teresa Remmet [Wed, 6 Oct 2021 09:56:53 +0000 (11:56 +0200)]
configs: phycore-imx8mm_defconfig: Enable clk command
Enable clk command to dump clock tree.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Teresa Remmet [Wed, 6 Oct 2021 09:56:52 +0000 (11:56 +0200)]
board: phytec: phycore-imx8mm: Add SPI-NOR flash support
Adds SPI-NOR flash support to erase, read and write in bootloader.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Teresa Remmet [Wed, 6 Oct 2021 09:56:51 +0000 (11:56 +0200)]
arm: dts: phycore-imx8mm: Fix property
Fix misspelled property "stdout-path".
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Teresa Remmet [Wed, 6 Oct 2021 09:56:50 +0000 (11:56 +0200)]
arm: dts: phycore-imx8mm-u-boot: Add wdog pinctrl entry
Add missing pinctrl entry in spl.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Teresa Remmet [Wed, 6 Oct 2021 09:56:49 +0000 (11:56 +0200)]
include: configs: phycore-imx8mm: Do not use macro for address
Do not use size macros for addesses. So convert PHYS_SDRAM to address.
No functional change.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Teresa Remmet [Wed, 6 Oct 2021 09:56:48 +0000 (11:56 +0200)]
include: configs: phycore-imx8mm: Remove not needed defines
Remove obsolet defines in phycore_imx8mm.h.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Teresa Remmet [Wed, 6 Oct 2021 09:56:47 +0000 (11:56 +0200)]
include: configs: phycore_imx8mm: Remove hard coded network settings
Remove ip address and server ip from board config as they should not
be added hardcoded.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Teresa Remmet [Wed, 6 Oct 2021 09:56:46 +0000 (11:56 +0200)]
board: phytec: phycore_imx8mm: Clean up spl
Remove not needed code in the spl board code.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Marcel Ziswiler [Sat, 9 Oct 2021 20:41:13 +0000 (22:41 +0200)]
verdin-imx8mm: fix watchdog pinctrl issue
Finally, found the root cause of the issue already once mentioned back
here [2] which caused the following error message during boot:
imx_wdt watchdog@
30280000:
pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19
Turns out while the watchdog node itself was already u-boot,dm-spl its
pinctrl node was not which caused it to be unavailable at that early
stage. Note that any and all other boards I checked also seem to be
missing this. However, I can't judge whether or not they might indeed
need a similar fix or not.
[2] https://marc.info/?l=u-boot&m=
161786572422973
Fixes: commit d304e7ace3a6
("ARM: imx8m: Fix reset in SPL on Toradex iMX8MM Verdin")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Igor Opaniuk [Sat, 9 Oct 2021 20:41:12 +0000 (22:41 +0200)]
verdin-imx8mm: use preboot for fdtfile evaluation
Enable and set preboot var with fdtfile evaluation.
It will be checked and run immediately before starting the
CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp.
entering interactive mode.
This provides possibility to use different boot cmds in interactive mode
without manual setting fdtfile value, as it it's already evaluated
before entering interactive mode.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Oleksandr Suvorov [Sat, 9 Oct 2021 20:41:11 +0000 (22:41 +0200)]
include/configs: apalis-imx8/verdin-imx8mm: rename kernel image variable
Variable "kernel_image" is used in boot.scr script only, that sets its
own default value to the constant string @@KERNEL_IMAGETYPE@@ in case
"kernel_image" is not set.
The default name of the kernel image shipped with BSP 5.x is "Image.gz".
Setting kernel_image="Image" as a pre-defined u-boot variable
breaks booting systems with modern versions of boot.scr, whereas
renaming it fixes booting with modern scripts and does not break working
of earlier versions of boot.scr.
While at it also update the copyright period, rather than hard-coding
fdtfile default fdt_board to dev for the Verdin iMX8M Mini and fix its
closing #endif comment.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Max Krummenacher [Sat, 9 Oct 2021 20:41:10 +0000 (22:41 +0200)]
verdin-imx8mm: drop support for v1.0 hardware
We drop support for Verdin iMX8M Mini V1.0B.
Related-to: ELB-3551
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Marcel Ziswiler [Sat, 9 Oct 2021 20:41:09 +0000 (22:41 +0200)]
verdin-imx8mm: clean-up include order
Alphabetically order includes.
While at it also update copyright year resp. period.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Max Krummenacher [Sat, 9 Oct 2021 20:41:08 +0000 (22:41 +0200)]
verdin-imx8mm: enable sleep_moci output
This powers some peripherals on the carrier board e.g. the USB hub.
Related-to: ELB-3206
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Marcel Ziswiler [Sat, 9 Oct 2021 20:41:07 +0000 (22:41 +0200)]
verdin-imx8mm: switch to use binman to pack images
Use binman to pack images.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Marcel Ziswiler [Sat, 9 Oct 2021 20:41:06 +0000 (22:41 +0200)]
arm64: dts: imx8mm-verdin-u-boot.dtsi: alphabetically re-order
Alphabetically re-order nodes and properties.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Marcel Ziswiler [Sat, 9 Oct 2021 20:41:05 +0000 (22:41 +0200)]
ARM: dts: imx8mm-verdin: prepare for dek blob encapsulation
Prepare for DEK blob encapsulation support through "dek_blob" command.
On ARMv8, u-boot runs in non-secure, thus cannot encapsulate a DEK blob
for encrypted boot.
The DEK blob is encapsulated by OP-TEE through a trusted application
call. U-boot sends and receives the DEK and the DEK blob binaries
through OP-TEE dynamic shared memory.
To enable the DEK blob encapsulation, add to the defconfig:
CONFIG_SECURE_BOOT=y
CONFIG_FAT_WRITE=y
CONFIG_CMD_DEKBLOB=y
Taken from NXP's commit
56d2050f4028 ("imx8m: Add DEK blob encapsulation
for imx8m").
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Marcel Ziswiler [Sat, 9 Oct 2021 20:41:04 +0000 (22:41 +0200)]
verdin-imx8mm: fix ethernet
Turns out Microship (formerly Micrel) meanwhile integrated proper
support for the DLL setup on their KSZ9131. Unfortunately, this
conflicts with our previous board code doing that.
Fix this by getting rid of our board code and just relying on the
generic implementation relying on rgmii-id being used as phy-mode.
Fixes: commit c6df0e2ffdc4
("net: phy: micrel: add support for DLL setup on ksz9131")
Fixes: commit af2d3c91d877
("ARM: dts: imx8mm-verdin: Set PHY mode to RGMII-ID")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Marcel Ziswiler [Sat, 9 Oct 2021 20:41:03 +0000 (22:41 +0200)]
imx8m: clean-up kconfig indentation
Replace spurious spaces with proper tabs.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Stefano Babic [Wed, 20 Oct 2021 10:13:44 +0000 (12:13 +0200)]
imx8mm-cl-iot-gate-optee: align config with Kconfig
Due to missing configs, CI goes in deadlock until an OOM is tracked. Add
CONFIG_SYS_LOAD_ADDR and replace CONFIG_SYS_EXTRA_OPTIONS with
CONFIG_IMX_CONFIG.
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Ying-Chun Liu (PaulLiu)" <paul.liu@linaro.org>
CC: Fabio Estevam <festevam@denx.de>
Stefano Babic [Wed, 20 Oct 2021 09:55:25 +0000 (11:55 +0200)]
kontron-sl-mx8mm: fix missing configs and deadlock in CI
Even if board can be successfuly built, CI goes in deadlock (see thread
on https://www.mail-archive.com/u-boot@lists.denx.de/msg419663.html).
This is caused by SYS_CONFIG set in header file and because defconfig
for the board is out of sync with Kconfig. As result, buildman goes on
to read from stdin until an OOM is reached.
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Frieder Schrempf <frieder.schrempf@kontron.de>
Simon Glass [Wed, 20 Oct 2021 03:43:24 +0000 (21:43 -0600)]
buildman: Detect Kconfig loops
Hex and int Kconfig options are supposed to have defaults. This is so we
can configure U-Boot without having to enter particular values for the
items that don't have specific values in the board's defconfig file.
If this rule is not followed, then introducing a new Kconfig can produce
a loop like this:
Break things (BREAK_ME) [] (NEW)
Error in reading or end of file.
Break things (BREAK_ME) [] (NEW)
Error in reading or end of file.
The continues forever since buildman passes /dev/null to 'conf', and
the build system just tries again. Eventually there is so much output that
buildman runs out of memory.
We can detect this situation by looking for a symbol (like 'BREAK_ME')
which has no default (the '[]' above) and is marked as new. If this
appears multiple times in the output, we know something is wrong.
Add a filter function for the output which detects this situation. Allow
it to return True to terminate the process. Implement this termination in
cros_subprocess.
With this we get a nice message:
buildman --board sandbox -T0
Building current source for 1 boards (0 threads, 32 jobs per thread)
sandbox: w+ sandbox
+.config:66:warning: symbol value '' invalid for BREAK_ME
+
+Error in reading or end of file.
+make[3]: *** [scripts/kconfig/Makefile:75: syncconfig] Terminated
+make[2]: *** [Makefile:569: syncconfig] Terminated
+make: *** [Makefile:177: sub-make] Terminated
+(** did you define an int/hex Kconfig with no default? **)
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 20 Oct 2021 03:43:23 +0000 (21:43 -0600)]
buildman: Write output even on fatal error
At present buildman does not write any output (to the 'out' and 'err)
files if the build terminates with a fatal error. This is to avoid adding
lots of spam to the logs.
However there are times when this is actually useful, such as when the
build fails for an obscure reason such as a Kconfig loop.
Update the logic to always write the output, so that the user gets a clue
as to what is happening.
Signed-off-by: Simon Glass <sjg@chromium.org>
Nick Hu [Mon, 18 Oct 2021 03:50:05 +0000 (11:50 +0800)]
riscv: Avoid io read/write cause wrong result
io read/write may cause wrong result because they may read/write data
from/to register instead of memory. Add 'volatile' to avoid it.
Signed-off-by: Nick Hu <nick.hu@sifive.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Bin Meng [Sun, 12 Sep 2021 03:15:16 +0000 (11:15 +0800)]
board: sifive: Fix -Wint-to-pointer-cast warning
The following warning is seen in unleashed.c in a 32-bit build:
warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Cast with uintptr_t.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Bin Meng [Sun, 12 Sep 2021 03:15:15 +0000 (11:15 +0800)]
ram: sifive: Fix -Wint-to-pointer-cast warnings
The following warning is seen in sifive_ddr.c in a 32-bit build:
warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Change to use dev_read_addr_index_ptr().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Bin Meng [Sun, 12 Sep 2021 03:15:14 +0000 (11:15 +0800)]
net: macb: Fix -Wint-to-pointer-cast warnings
The following warning is seen in macb.c in a 32-bit build:
warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Change to use dev_read_addr_index_ptr(), or cast with uintptr_t.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Bin Meng [Sun, 12 Sep 2021 03:15:13 +0000 (11:15 +0800)]
dm: Provide dev_read_addr_index_ptr() wrapper
Like dev_read_addr_ptr(), provide a wrapper for the indexed version.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Sun, 12 Sep 2021 03:15:12 +0000 (11:15 +0800)]
dm: core: Add a new API devfdt_get_addr_index_ptr()
At present there is only devfdt_get_addr_ptr() which only returns
the first <addr, size> pair in the 'reg' property. Add a new API
devfdt_get_addr_index_ptr() to return the indexed pointer.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Bin Meng [Sun, 12 Sep 2021 03:15:11 +0000 (11:15 +0800)]
i2c: ocores: Fix -Wint-to-pointer-cast warning
The following warning is seen in ocores_i2c.c in a 32-bit build:
warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Change to use dev_read_addr_ptr().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Bin Meng [Sun, 12 Sep 2021 03:15:10 +0000 (11:15 +0800)]
gpio: sifive: Fix -Wint-to-pointer-cast warning
dev_read_addr() returns a value of type fdt_addr_t which is a 64-bit
address and plat->base is a pointer. In a 32-bit build, this causes the
following warning seen when building sifive-gpio.c:
warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Change to use dev_read_addr_ptr().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Bin Meng [Sun, 12 Sep 2021 03:15:09 +0000 (11:15 +0800)]
clk: sifive: Fix -Wint-to-pointer-cast warning
dev_read_addr() returns a value of type fdt_addr_t which is a 64-bit
address and pd->va is a pointer. In a 32-bit build, this causes the
following warning seen when building sifive-prci.c:
warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Change to use dev_read_addr_ptr().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Bin Meng [Sun, 12 Sep 2021 03:15:08 +0000 (11:15 +0800)]
cache: sifive: Fix -Wint-to-pointer-cast warning
The following warning is seen in cache-sifive-ccache.c in a 32-bit build:
warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Fix by casting it with uintptr_t.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Bin Meng [Sat, 11 Sep 2021 14:31:23 +0000 (22:31 +0800)]
board: sifive: Fix a potential build warning in board_fdt_blob_setup()
Commit
47d73ba4f4a4 ("board: sifive: overwrite board_fdt_blob_setup in u-boot proper")
added a board-specific implementation of board_fdt_blob_setup() which
takes a pointer as the return value, but it does not return anything
if CONFIG_OF_SEPARATE is not enabled. This will cause a build warning
seen when testing booting S-mode U-Boot directly from QEMU, per the
instructions in [1]:
board/sifive/unleashed/unleashed.c: In function ‘board_fdt_blob_setup’:
board/sifive/unleashed/unleashed.c:125:1: warning: control reaches end of non-void function [-Wreturn-type]
Return &_end as the default case.
[1] https://qemu.readthedocs.io/en/latest/system/riscv/sifive_u.html#running-u-boot
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Tom Rini [Wed, 20 Oct 2021 00:45:12 +0000 (20:45 -0400)]
Merge branch '2021-10-19-assorted-changes'
- Assorted minor fixes and a new GPIO driver
Samuel Holland [Wed, 13 Oct 2021 00:40:29 +0000 (19:40 -0500)]
clk: fixed_rate: add dummy disable() function
commit
6bf6d81c1112 ("clk: fixed_rate: add dummy enable() function")
implemented .enable, so fixed rate clocks can be used where drivers
might call clk_enable(). Implement the .disable op for the same reason;
some drivers, e.g. USB PHYs, may attempt to disable clocks at runtime.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Usama Arif [Tue, 12 Oct 2021 12:43:16 +0000 (13:43 +0100)]
arm: total_compute: increase DRAM to 8GB
The extra 6GB start at 0x8080000000.
Signed-off-by: Usama Arif <usama.arif@arm.com>
Tom Rini [Mon, 11 Oct 2021 15:11:41 +0000 (11:11 -0400)]
tools: Stop re-defining -std= when building tools
While we intentionally set -std=gnu11 for building host tools, and have
for quite some time, we never dropped -std=gnu99 from tools/Makefile.
This resulted in passing -std=gnu11 ... -std=gnu99 when building, and
gnu99 would win. This in turn would result now in warnings such as:
tools/mkeficapsule.c:25:15: warning: redefinition of typedef 'u32' is a C11 feature [-Wtypedef-redefinition]
typedef __u32 u32;
^
Signed-off-by: Tom Rini <trini@konsulko.com>
Amjad Ouled-Ameur [Mon, 11 Oct 2021 12:27:38 +0000 (14:27 +0200)]
configs: am335x_evm: enable CONFIG_CLK_TI_CTRL
This enables the clock controller driver support on TI's SoCs. This will
fix this GPIO issue at boot time:
request_and_set_gpio: Unable to request GPIO_PR1_MII_CTRL
request_and_set_gpio: Unable to request GPIO_MUX_MII_CTRL
request_and_set_gpio: Unable to request GPIO_FET_SWITCH_CTRL
request_and_set_gpio: Unable to request GPIO_PHY_RESET
This issue comes from the fact that the clock controller is not probed.
Enable the TI's clock controller driver support to solve this.
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Hannes Schmelzer [Fri, 1 Oct 2021 11:37:57 +0000 (13:37 +0200)]
drivers/gpio: add support for MAX7320 i2c i/o expander
This commit adds support for the MAX7320 (and clones) gpio expander.
Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
Simon Glass [Wed, 22 Sep 2021 17:34:44 +0000 (11:34 -0600)]
Makefile: Only build dtc if needed
At present U-Boot always builds dtc if CONFIG_OF_CONTROL is defined, even
when DTC is provided. The built dtc is not actually used, so this is a
waste of time.
Update the Makefile logic to build dtc only if one is not provided to the
build with the DTC variable. Add documentation to explain this.
This saves about 3.5 seconds of elapsed time on a clean build of
sandbox_spl for me.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Wed, 22 Sep 2021 17:34:43 +0000 (11:34 -0600)]
Revert "kbuild: remove unused dtc-version.sh script"
We need this to make building dtc optional. It makes no sense to build our
own dtc if the system one works correctly.
This reverts commit
ddb87a0b40262ff99d675e946f57427642303938.
Signed-off-by: Simon Glass <sjg@chromium.org>
Tom Rini [Tue, 19 Oct 2021 13:07:07 +0000 (09:07 -0400)]
Merge branch '2021-10-18-OF_xxx-cleanup'
- Clean things up and rework such that we can drop OF_PRIOR_STAGE
Marek Vasut [Sat, 11 Sep 2021 22:40:00 +0000 (00:40 +0200)]
ARM: imx: mx5: Add altbootcmd and resets to M53Menlo
Bulletproof the default boot command with reset statements in case
any command in the chain would fail. In case a failure were to happen,
the board will reset, increment boot counter and retry the procedure.
In case the failures persist and the boot counter reaches the bootlimit,
U-Boot starts altbootcmd instead of the default bootcmd boot command.
The altbootcmd swaps the default boot partition for the other boot
partition, which is an identical copy or an older copy, and tries
booting from that one instead.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Marek Vasut [Sat, 11 Sep 2021 22:39:59 +0000 (00:39 +0200)]
ARM: imx: mx5: Enable Thumb2 build on MX53 Menlo board
Build U-Boot in Thumb2 mode for M53Menlo board, this makes better
use of the CPU since the instruction density is higher.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Marek Vasut [Sat, 11 Sep 2021 22:39:58 +0000 (00:39 +0200)]
ARM: imx: mx5: Enable BMODE command on MX53 Menlo board
The board can do primary/secondary boot switching, enable the bmode command.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Ricardo Salveti [Thu, 26 Aug 2021 11:04:24 +0000 (14:04 +0300)]
board: ea: mx7ulp_com: move setting CONFIG_BOOTCOMMAND to defconfig
Move setting CONFIG_BOOTCOMMAND to the mx7ulp_com_defconfig file.
It also allows replacing the default CONFIG_BOOTCOMMAND without
code modification.
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Fabio Estevam [Tue, 24 Aug 2021 10:58:48 +0000 (07:58 -0300)]
smegw01: Select IMX_HAB
Select IMX_HAB to allow secure boot.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Fabio Estevam [Tue, 24 Aug 2021 10:58:47 +0000 (07:58 -0300)]
smegw01: Add redundant environment support
Add redundant environment support as it is required
by SWUpdate.
While at it, place the CONFIG_ENV_OFFSET at 0x100000 to allow
more headroom.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Francesco Dolcini [Tue, 31 Aug 2021 09:46:06 +0000 (11:46 +0200)]
apalis-imx6: use dynamic DDR calibration
Enable dynamic DDR calibration to have a reliable behavior on edge
temperatures conditions.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Francesco Dolcini [Tue, 31 Aug 2021 09:46:05 +0000 (11:46 +0200)]
colibri-imx6: use dynamic DDR calibration
Enable dynamic DDR calibration to have a reliable behavior on edge
temperatures conditions.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Ilias Apalodimas [Mon, 11 Oct 2021 21:00:15 +0000 (00:00 +0300)]
treewide: Remove OF_PRIOR_STAGE
The previous patches removed OF_PRIOR_STAGE from the last consumers of the
Kconfig option. Cleanup any references to it in documentation, code and
configuration options.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias Apalodimas [Mon, 11 Oct 2021 21:00:14 +0000 (00:00 +0300)]
board: arm: Remove OF_PRIOR_STAGE from the remaining Arm boards
At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got
introduced, in order to support a DTB handed over by an earlier stage boo
loader. However we have another option in the Kconfig (OF_BOARD) which has
identical semantics.
So let's remove the option in an effort to simplify U-Boot's config and DTB
management, and use OF_BOARD instead.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias Apalodimas [Mon, 11 Oct 2021 21:00:13 +0000 (00:00 +0300)]
riscv: Remove OF_PRIOR_STAGE from RISC-V boards
At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got
introduced, in order to support a DTB handed over by an earlier stage boo
loader. However we have another option in the Kconfig (OF_BOARD) which has
identical semantics.
On RISC-V some of the boards pick up the DTB from a1 and copy it in their
private gd_t. Apart from that they copy it to prior_stage_fdt_address, if
the Kconfig option is selected, which is unnecessary.
So let's switch the config option for those boards to OF_BOARD and define
the required board_fdt_blob_setup() for them.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Tom Rini [Mon, 18 Oct 2021 01:13:49 +0000 (21:13 -0400)]
Merge tag 'u-boot-rockchip-
20211015' of https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Fix for Rockchip mmc HS400 mode;
- Fix for px30 board Odroid Go;
- rockchip_sfc update;
- rk3568 clk update;
- doc fix;
Tom Rini [Fri, 15 Oct 2021 19:58:16 +0000 (15:58 -0400)]
Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-tegra
On merge, fixup order of fdtdec_add_reserved_memory parameters in
arch/arm/cpu/armv8/fsl-layerscape/soc.c
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 15 Oct 2021 17:45:15 +0000 (13:45 -0400)]
Merge branch '2021-10-15-Kconfig-migrations'
- Assorted Kconfig migration patches
Tom Rini [Fri, 15 Oct 2021 12:06:20 +0000 (08:06 -0400)]
configs: Resync with savedefconfig
Resync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
Marek Behún [Sat, 9 Oct 2021 13:27:35 +0000 (15:27 +0200)]
Convert CONFIG_USB_EHCI_IS_TDI to Kconfig
On mvebu this is defined if and only if !ARM64.
Otherwise it is defined for boards with ARCH_MX23, ARCH_TEGRA and
ARCH_ZYNQ, and also for SOC_AR934X (tplink_wdr4300).
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Marek Behún [Sat, 9 Oct 2021 13:27:34 +0000 (15:27 +0200)]
Drop CONFIG_USB_EHCI_KIRKWOOD
This config option doesn't do anything.
nas220 uses USB_EHCI_MARVELL.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Marek Behún [Sat, 9 Oct 2021 13:27:33 +0000 (15:27 +0200)]
Convert CONFIG_USB_EHCI_MXS to Kconfig
This option is only used for
mx23evk_defconfig
mx23_olinuxino_defconfig
which are the only i.MX23 boards.
Add depend on ARCH_MX23 and default to y.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Marek Behún [Sat, 9 Oct 2021 13:27:32 +0000 (15:27 +0200)]
Rename CONFIG_EHCI_IS_TDI to CONFIG_USB_EHCI_IS_TDI
In preparation for moving this option to Kconfig, rename it to be
consistent with other USB EHCI Kconfig options.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Yifeng Zhao [Fri, 15 Oct 2021 08:41:27 +0000 (16:41 +0800)]
mmc: rockchip_sdhci: enable strobe line for HS400
The default configuration of rk3399 EMMC PHY does not enable the
strobe line, and EMMC controller will got data transmission error
at HS400 mode.
Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Elaine Zhang [Tue, 12 Oct 2021 08:43:00 +0000 (16:43 +0800)]
clk: rockchip: rk3568: update clks
fix up ppll init freq.
support tclk_emmc.
add freq (26M) for mmc device.
fix up the sfc clk rate unit error.
Change in V2:
remove change id.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jon Lin [Fri, 17 Sep 2021 13:14:59 +0000 (21:14 +0800)]
spi: rockchip_sfc: Using read_poll
Using read_poll logic.
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jon Lin [Fri, 17 Sep 2021 13:14:58 +0000 (21:14 +0800)]
spi: rockchip_sfc: Implement set_speed logic
Set clock related processing into set_speed logic. And Optimize
printing format.
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Chris Morgan [Sat, 21 Aug 2021 01:46:58 +0000 (20:46 -0500)]
rockchip: px30: sync serial flash controller bindings with mainline
The devicetree submitted and approved for the mainline linux kernel is
slightly different than the one present here. This syncs both
devicetrees (for the Rockchip SFC node at least) present on the PX30
and the Odroid Go Advance. Changes include renaming the flash node,
reordering the values in the SFC node for the rk3326-odroid-go2,
changing the name of the cs pinctrl node to cs0, and updating the
u-boot specific tree to utilize the new flash node value.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Johan Jonker [Fri, 20 Aug 2021 17:27:59 +0000 (19:27 +0200)]
doc: rockchip: write all brand names with a capital
Brand names are supposed to be written with a capital,
so change them all.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Johan Jonker [Fri, 20 Aug 2021 17:27:58 +0000 (19:27 +0200)]
doc: rockchip: sort rockchip support list for rk3188
In the list of mainline U-boot supported Rockchip boards
rk3188 is placed below under the name rv3188. Give back it's
original name and sort the list in alphabetical order.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Peter Robinson [Thu, 12 Aug 2021 09:11:32 +0000 (10:11 +0100)]
rockchip: rk33xx: Drop ROCKCHIP_USB2_PHY on boards without it
The 64 bit rk33xx chips don't have the ROCKCHIP_USB2_PHY IP so
drop the configs as they were likely copied over from other
boards during enablement.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Chris Morgan [Thu, 5 Aug 2021 16:48:48 +0000 (11:48 -0500)]
rockchip: board: remove SCLK_GPU from U-Boot DT
Starting with commit
92f1e9a4b31c ("clk: Detect failure to set
defaults") the clk driver for the PX30 would fail to probe for the
Odroid Go Advance. This patch is to remove the clock for the GPU from
the U-Boot specific devicetree, as that clock is not supported by the
U-Boot clk_px30 driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Chris Morgan [Thu, 5 Aug 2021 16:48:47 +0000 (11:48 -0500)]
rockchip: px30: add support for setting cpll clock
Starting with commit
92f1e9a4b31c ("clk: Detect failure to set
defaults") the clk driver for the PX30 for the Odroid Go Advance would
no longer probe correctly, because setting the cpll and gpu clocks are
not supported with the clk_px30 U-Boot driver. This adds support for
setting the cpll clock to the clk_px30 driver. Another patch will
update the U-Boot specific device-tree to remove the GPU clock which is
not used by U-Boot.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Patrick Delaunay [Mon, 4 Oct 2021 09:59:54 +0000 (11:59 +0200)]
Remove unused CONFIG_CONS_NONE
Remove the latest reference of CONFIG_CONS_NONE in code
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Patrick Delaunay [Mon, 4 Oct 2021 09:59:53 +0000 (11:59 +0200)]
Remove unused CONFIG_SYS_FLASH_AMD_CHECK_DQ7
Remove the latest reference of CONFIG_SYS_FLASH_AMD_CHECK_DQ7 in code
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Patrick Delaunay [Mon, 4 Oct 2021 09:59:52 +0000 (11:59 +0200)]
Remove unused CONFIG_NO_RELOCATION
Remove the latest reference of CONFIG_NO_RELOCATION in code
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Patrick Delaunay [Mon, 4 Oct 2021 09:59:51 +0000 (11:59 +0200)]
am33x: Remove unused define CONFIG_MUSB_HOST
This define was left over from a previous revision, and was never used.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Patrick Delaunay [Mon, 4 Oct 2021 09:59:50 +0000 (11:59 +0200)]
scripts: remove some configs in config_whitelist.txt
Remove some config finishing by _ badly added by
scripts/build-whitelist.sh when joker is used in comments.
for example:
doc/uImage.FIT/command_syntax_extensions.txt:
... #ifdef CONFIG_OF_* | ...
cmd/nvedit.c:# error Define one of CONFIG_ENV_IS_IN_{EEPROM| \
FLASH|MMC|FAT|EXT4|\
Remove also configs only used in comments:
- CONFIG_BOOGER in include/linux/kconfig.h
- CONFIG_COMMANDS
- CONFIG_INIT_IGNORE_ERROR
- CONFIG_REG_*
- CONFIG_HOTPLUG : drivers/watchdog/omap_wdt.c:18
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Tom Rini [Fri, 15 Oct 2021 11:50:59 +0000 (07:50 -0400)]
Merge branch '2021-10-14-assorted-updates'
- Update to LLVM-13 in CI, assorted PCI fixes and pytest in CI
improvements
Holger Brunck [Tue, 12 Oct 2021 06:50:38 +0000 (08:50 +0200)]
board/km: update MAINTAINERS files
Update the e-mail addresses and person responsible.
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
CC: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachienergy.com>
CC: Rainer Boschung <rainer.boschung@hitachienergy.com>
Simon Glass [Fri, 8 Oct 2021 15:15:23 +0000 (09:15 -0600)]
pytest: Show a message when sandbox crashes
When a test hands on a real board there is no way on the console to obtain
any information about why it hung.
With sandbox we can actually find out that it died and get a signal or
exit code. Add this to make it easier to figure out what happened.
So instead of:
test/py/u_boot_spawn.py:171: in expect
c = os.read(self.fd, 1024).decode(errors='replace')
E OSError: [Errno 5] Input/output error
We get:
test/py/u_boot_spawn.py:171: in expect
c = os.read(self.fd, 1024).decode(errors='replace')
E ValueError: U-Boot exited with signal 11 (Signals.SIGSEGV)
Signed-off-by: Simon Glass <sjg@chromium.org>
Pali Rohár [Fri, 8 Oct 2021 15:01:24 +0000 (17:01 +0200)]
pci: Fix printf format for regions
Correct printf format for unsigned long long is %llx and not %llxx.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Pali Rohár [Thu, 7 Oct 2021 12:51:01 +0000 (14:51 +0200)]
pci: Fix showing registers
Header type is 7-bit number so use all 7 bits when detecting header type
and not only 2 bits.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>