From ca3ac1e32a3e881a89a7335107d5056e233f2963 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
Date: Mon, 1 Mar 2021 14:33:37 -0800
Subject: [PATCH] imx: ventana: enable dm for SPI
Enable driver model for SPI which allows us to remove the iomux
and init.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
board/gateworks/gw_ventana/gw_ventana.c | 27 -------------------------
configs/gwventana_emmc_defconfig | 3 +++
configs/gwventana_gw5904_defconfig | 3 +++
configs/gwventana_nand_defconfig | 3 +++
4 files changed, 9 insertions(+), 27 deletions(-)
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 43a8ab6a16..5237f2dac4 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -19,7 +19,6 @@
#include <asm/gpio.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/sata.h>
-#include <asm/mach-imx/spi.h>
#include <asm/mach-imx/video.h>
#include <asm/io.h>
#include <asm/setup.h>
@@ -41,7 +40,6 @@
#include <power/pfuze100_pmic.h>
#include <fdt_support.h>
#include <jffs2/load_kernel.h>
-#include <spi_flash.h>
#include "gsc.h"
#include "common.h"
@@ -127,28 +125,6 @@ int board_ehci_hcd_init(int port)
}
#endif /* CONFIG_USB_EHCI_MX6 */
-#ifdef CONFIG_MXC_SPI
-iomux_v3_cfg_t const ecspi1_pads[] = {
- /* SS1 */
- IOMUX_PADS(PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(SPI_PAD_CTRL)),
- IOMUX_PADS(PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL)),
- IOMUX_PADS(PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL)),
- IOMUX_PADS(PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)),
-};
-
-int board_spi_cs_gpio(unsigned bus, unsigned cs)
-{
- return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(3, 19)) : -1;
-}
-
-static void setup_spi(void)
-{
- gpio_request(IMX_GPIO_NR(3, 19), "spi_cs");
- gpio_direction_output(IMX_GPIO_NR(3, 19), 1);
- SETUP_IOMUX_PADS(ecspi1_pads);
-}
-#endif
-
/* configure eth0 PHY board-specific LED behavior */
int board_phy_config(struct phy_device *phydev)
{
@@ -591,9 +567,6 @@ int board_init(void)
setup_ventana_i2c(0);
board_type = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
-#ifdef CONFIG_MXC_SPI
- setup_spi();
-#endif
setup_ventana_i2c(1);
setup_ventana_i2c(2);
diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig
index d383a85f8b..d5270c5232 100644
--- a/configs/gwventana_emmc_defconfig
+++ b/configs/gwventana_emmc_defconfig
@@ -96,6 +96,9 @@ CONFIG_DM_REGULATOR_FIXED=y
CONFIG_CONS_INDEX=2
CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_MXC_SPI=y
CONFIG_DM_THERMAL=y
CONFIG_IMX_THERMAL=y
CONFIG_USB=y
diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig
index b6ef9e6f8a..091bf30c3b 100644
--- a/configs/gwventana_gw5904_defconfig
+++ b/configs/gwventana_gw5904_defconfig
@@ -100,6 +100,9 @@ CONFIG_DM_REGULATOR_FIXED=y
CONFIG_CONS_INDEX=2
CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_MXC_SPI=y
CONFIG_DM_THERMAL=y
CONFIG_IMX_THERMAL=y
CONFIG_USB=y
diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig
index ea5ed052b5..0ccd3e9dfd 100644
--- a/configs/gwventana_nand_defconfig
+++ b/configs/gwventana_nand_defconfig
@@ -102,6 +102,9 @@ CONFIG_DM_REGULATOR_FIXED=y
CONFIG_CONS_INDEX=2
CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_MXC_SPI=y
CONFIG_DM_THERMAL=y
CONFIG_IMX_THERMAL=y
CONFIG_USB=y
--
2.39.5