From e82024def64569bd7cabb430b4cef9a4c102f2be Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 3 Dec 2019 15:02:50 +0100 Subject: [PATCH] arm64: zynqmp: Do not assing MIO34 that early on zcu100 MIO34 is connected to POWER_KILL signal. When MIO configuration is done in psu_init() and this pin is assigned to PMU but PMU configuration is not loaded yet. PMU gpio output is high that means board is powered off immediately. The patch is fixing this sequence that MIO34 stays assing to ps gpio IP. PMU config is loaded in SPL and then pin assigned to PMU through psu_post_config_data(). Signed-off-by: Michal Simek --- arch/arm/mach-zynqmp/include/mach/psu_init_gpl.h | 1 + arch/arm/mach-zynqmp/psu_spl_init.c | 9 +++++++++ arch/arm/mach-zynqmp/spl.c | 2 ++ board/xilinx/zynqmp/zynqmp-zcu100-revC/psu_init_gpl.c | 7 ++++++- 4 files changed, 18 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-zynqmp/include/mach/psu_init_gpl.h b/arch/arm/mach-zynqmp/include/mach/psu_init_gpl.h index 15e54c0493..e37acda2f8 100644 --- a/arch/arm/mach-zynqmp/include/mach/psu_init_gpl.h +++ b/arch/arm/mach-zynqmp/include/mach/psu_init_gpl.h @@ -21,5 +21,6 @@ void prog_reg(unsigned long addr, unsigned long mask, unsigned long shift, unsigned long value); int psu_init(void); +unsigned long psu_post_config_data(void); #endif /* _PSU_INIT_GPL_H_ */ diff --git a/arch/arm/mach-zynqmp/psu_spl_init.c b/arch/arm/mach-zynqmp/psu_spl_init.c index b357de3235..b6abdfd608 100644 --- a/arch/arm/mach-zynqmp/psu_spl_init.c +++ b/arch/arm/mach-zynqmp/psu_spl_init.c @@ -77,3 +77,12 @@ __weak int psu_init(void) */ return -1; } + +__weak unsigned long psu_post_config_data(void) +{ + /* + * This function is overridden by the one in + * board/xilinx/zynqmp/(platform)/psu_init_gpl.c, if it exists. + */ + return 0; +} diff --git a/arch/arm/mach-zynqmp/spl.c b/arch/arm/mach-zynqmp/spl.c index a2079535a5..527646875a 100644 --- a/arch/arm/mach-zynqmp/spl.c +++ b/arch/arm/mach-zynqmp/spl.c @@ -13,6 +13,7 @@ #include #include #include +#include #include void board_init_f(ulong dummy) @@ -53,6 +54,7 @@ void spl_board_init(void) preloader_console_init(); ps_mode_reset(MODE_RESET); board_init(); + psu_post_config_data(); } #endif diff --git a/board/xilinx/zynqmp/zynqmp-zcu100-revC/psu_init_gpl.c b/board/xilinx/zynqmp/zynqmp-zcu100-revC/psu_init_gpl.c index e1fdabaeb9..585b3afc21 100644 --- a/board/xilinx/zynqmp/zynqmp-zcu100-revC/psu_init_gpl.c +++ b/board/xilinx/zynqmp/zynqmp-zcu100-revC/psu_init_gpl.c @@ -409,7 +409,6 @@ static unsigned long psu_mio_init_data(void) psu_mask_write(0xFF18007C, 0x000000FEU, 0x00000000U); psu_mask_write(0xFF180080, 0x000000FEU, 0x00000008U); psu_mask_write(0xFF180084, 0x000000FEU, 0x00000008U); - psu_mask_write(0xFF180088, 0x000000FEU, 0x00000008U); psu_mask_write(0xFF18008C, 0x000000FEU, 0x00000000U); psu_mask_write(0xFF180090, 0x000000FEU, 0x00000000U); psu_mask_write(0xFF180094, 0x000000FEU, 0x00000000U); @@ -990,3 +989,9 @@ int psu_init(void) return 1; return 0; } + +unsigned long psu_post_config_data(void) +{ + psu_mask_write(0xFF180088, 0x000000FEU, 0x00000008U); + return 0; +} -- 2.39.5