From ddd025bb6e283744dc93d3653a0b6fbd5c35e904 Mon Sep 17 00:00:00 2001
From: Andrew Murray <amurray@embedded-bits.co.uk>
Date: Tue, 1 Oct 2013 15:58:56 +0100
Subject: [PATCH] usb: Fix error handling in musb_hcd.c
The wait_until_[rx|tx]ep_ready functions return a u8 to indicate success
containing the value 0, 1 or -1. This patch changes the return type to an
int to accommodate the negative return values.
These functions are used in the file using calls such as if (!wait_until...
Where a -1 is returned it is mishandled and treated as success instead of
a CRC error. This patch addresses this.
Cc: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@ti.com>
Signed-off-by: Andrew Murray <amurray@embedded-bits.co.uk>
Acked-by: Marek Vasut <marex@denx.de>
---
drivers/usb/musb/musb_hcd.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index 3dc5d6a558..41a8126b3e 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -267,7 +267,7 @@ static int wait_until_ep0_ready(struct usb_device *dev, u32 bit_mask)
/*
* waits until tx ep is ready. Returns 1 when ep is ready and 0 on error.
*/
-static u8 wait_until_txep_ready(struct usb_device *dev, u8 ep)
+static int wait_until_txep_ready(struct usb_device *dev, u8 ep)
{
u16 csr;
int timeout = CONFIG_MUSB_TIMEOUT;
@@ -299,7 +299,7 @@ static u8 wait_until_txep_ready(struct usb_device *dev, u8 ep)
/*
* waits until rx ep is ready. Returns 1 when ep is ready and 0 on error.
*/
-static u8 wait_until_rxep_ready(struct usb_device *dev, u8 ep)
+static int wait_until_rxep_ready(struct usb_device *dev, u8 ep)
{
u16 csr;
int timeout = CONFIG_MUSB_TIMEOUT;
@@ -1009,7 +1009,7 @@ int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
writew(csr | MUSB_TXCSR_TXPKTRDY, &musbr->txcsr);
/* Wait until the TxPktRdy bit is cleared */
- if (!wait_until_txep_ready(dev, MUSB_BULK_EP)) {
+ if (wait_until_txep_ready(dev, MUSB_BULK_EP) != 1) {
readw(&musbr->txcsr);
usb_settoggle(dev, ep, dir_out,
(csr >> MUSB_TXCSR_H_DATATOGGLE_SHIFT) & 1);
@@ -1044,7 +1044,7 @@ int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
writew(csr | MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
/* Wait until the RxPktRdy bit is set */
- if (!wait_until_rxep_ready(dev, MUSB_BULK_EP)) {
+ if (wait_until_rxep_ready(dev, MUSB_BULK_EP) != 1) {
csr = readw(&musbr->rxcsr);
usb_settoggle(dev, ep, dir_out,
(csr >> MUSB_S_RXCSR_H_DATATOGGLE) & 1);
@@ -1217,7 +1217,7 @@ int submit_int_msg(struct usb_device *dev, unsigned long pipe,
writew(csr | MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
/* Wait until the RxPktRdy bit is set */
- if (!wait_until_rxep_ready(dev, MUSB_INTR_EP)) {
+ if (wait_until_rxep_ready(dev, MUSB_INTR_EP) != 1) {
csr = readw(&musbr->rxcsr);
usb_settoggle(dev, ep, dir_out,
(csr >> MUSB_S_RXCSR_H_DATATOGGLE) & 1);
--
2.39.5