From d538efb9adcfa28e238c26146f58e040b0ffdc5b Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Fri, 17 Feb 2023 17:28:39 +0530 Subject: [PATCH] phy: rockchip: inno-usb2: Add support #address_cells = 2 New Rockchip devices have the usb phy nodes as standalone devices. These nodes have register nodes with #address_cells = 2, but only use 32 bit addresses. Adjust the driver to check if the returned address is "0", and adjust the index in that case. Derived and adjusted the similar change from linux-next with below commit <9c19c531dc98> ("phy: phy-rockchip-inno-usb2: support #address_cells = 2") Co-developed-by: Manoj Sai Signed-off-by: Manoj Sai Signed-off-by: Jagan Teki Reviewed-by: Kever Yang --- drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c index b32a498ea7..a01148db22 100644 --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c @@ -179,12 +179,21 @@ static int rockchip_usb2phy_probe(struct udevice *dev) if (IS_ERR(priv->reg_base)) return PTR_ERR(priv->reg_base); - ret = ofnode_read_u32(dev_ofnode(dev), "reg", ®); + ret = ofnode_read_u32_index(dev_ofnode(dev), "reg", 0, ®); if (ret) { dev_err(dev, "failed to read reg property (ret = %d)\n", ret); return ret; } + /* support address_cells=2 */ + if (reg == 0) { + if (ofnode_read_u32_index(dev_ofnode(dev), "reg", 1, ®)) { + dev_err(dev, "%s must have reg[1]\n", + ofnode_get_name(dev_ofnode(dev))); + return -EINVAL; + } + } + phy_cfgs = (const struct rockchip_usb2phy_cfg *) dev_get_driver_data(dev); if (!phy_cfgs) -- 2.39.5