From a591e75fbc16d4b4dd26758fc6d3bdb6bd6551cb Mon Sep 17 00:00:00 2001 From: Francesco Dolcini Date: Tue, 31 Aug 2021 11:46:06 +0200 Subject: [PATCH] apalis-imx6: use dynamic DDR calibration Enable dynamic DDR calibration to have a reliable behavior on edge temperatures conditions. Signed-off-by: Max Krummenacher Signed-off-by: Francesco Dolcini --- board/toradex/apalis_imx6/apalis_imx6.c | 19 +++++++++++++++++++ configs/apalis_imx6_defconfig | 1 + 2 files changed, 20 insertions(+) diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c index f4cd28d49f..25a4cd9f38 100644 --- a/board/toradex/apalis_imx6/apalis_imx6.c +++ b/board/toradex/apalis_imx6/apalis_imx6.c @@ -1076,6 +1076,24 @@ static void ddr_init(int *table, int size) writel(table[2 * i + 1], table[2 * i]); } +/* Perform DDR DRAM calibration */ +static void spl_dram_perform_cal(void) +{ +#ifdef CONFIG_MX6_DDRCAL + int err; + struct mx6_ddr_sysinfo ddr_sysinfo = { + .dsize = 2, + }; + + err = mmdc_do_write_level_calibration(&ddr_sysinfo); + if (err) + printf("error %d from write level calibration\n", err); + err = mmdc_do_dqs_calibration(&ddr_sysinfo); + if (err) + printf("error %d from dqs calibration\n", err); +#endif +} + static void spl_dram_init(void) { int minc, maxc; @@ -1094,6 +1112,7 @@ static void spl_dram_init(void) break; }; udelay(100); + spl_dram_perform_cal(); } void board_init_f(ulong dummy) diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig index 52f2539f11..329f38d1e4 100644 --- a/configs/apalis_imx6_defconfig +++ b/configs/apalis_imx6_defconfig @@ -10,6 +10,7 @@ CONFIG_SYS_MEMTEST_END=0x10010000 CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0xFFFFDE00 CONFIG_MX6Q=y +CONFIG_MX6_DDRCAL=y CONFIG_TARGET_APALIS_IMX6=y CONFIG_SYS_I2C_MXC_I2C1=y CONFIG_SYS_I2C_MXC_I2C2=y -- 2.39.5