From 4886f1cb5956910554cec6779307496d91bad283 Mon Sep 17 00:00:00 2001 From: Vignesh Raghavendra Date: Wed, 4 Dec 2019 22:17:24 +0530 Subject: [PATCH] arm: dts: k3-j721e-common-proc-board: Add DMA and CPSW related DT nodes Add DT nodes related to DMA and CPSW to -u-boot.dtsi to get networking up on J721e EVM. Signed-off-by: Vignesh Raghavendra Acked-by: Joe Hershberger Reviewed-by: Grygorii Strashko --- .../k3-j721e-common-proc-board-u-boot.dtsi | 238 ++++++++++++++++++ 1 file changed, 238 insertions(+) diff --git a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi index 541da22c48..9291e57e25 100644 --- a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi +++ b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi @@ -3,11 +3,18 @@ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ */ +#include +#include + / { chosen { stdout-path = "serial2:115200n8"; tick-timer = &timer1; }; + + aliases { + ethernet0 = &cpsw_port1; + }; }; &cbass_main{ @@ -24,6 +31,184 @@ clock-frequency = <25000000>; u-boot,dm-spl; }; + + mcu_conf: scm_conf@40f00000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x40f00000 0x0 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x40f00000 0x20000>; + + phy_sel: cpsw-phy-sel@4040 { + compatible = "ti,am654-cpsw-phy-sel"; + reg = <0x4040 0x4>; + reg-names = "gmii-sel"; + }; + }; + + cbass_mcu_navss: mcu_navss { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + dma-coherent; + dma-ranges; + ranges; + + ti,sci-dev-id = <232>; + u-boot,dm-spl; + + mcu_ringacc: ringacc@2b800000 { + compatible = "ti,am654-navss-ringacc"; + reg = <0x0 0x2b800000 0x0 0x400000>, + <0x0 0x2b000000 0x0 0x400000>, + <0x0 0x28590000 0x0 0x100>, + <0x0 0x2a500000 0x0 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + ti,num-rings = <286>; + ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */ + ti,sci = <&dmsc>; + ti,sci-dev-id = <235>; + u-boot,dm-spl; + }; + + mcu_udmap: udmap@31150000 { + compatible = "ti,j721e-navss-mcu-udmap"; + reg = <0x0 0x285c0000 0x0 0x100>, + <0x0 0x2a800000 0x0 0x40000>, + <0x0 0x2aa00000 0x0 0x40000>; + reg-names = "gcfg", "rchanrt", "tchanrt"; + #dma-cells = <3>; + + ti,ringacc = <&mcu_ringacc>; + ti,psil-base = <0x6000>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <236>; + + ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */ + <0x0f>; /* TX_HCHAN */ + ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */ + <0x0b>; /* RX_HCHAN */ + ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ + u-boot,dm-spl; + }; + }; + + mcu_cpsw: ethernet@046000000 { + compatible = "ti,j721e-cpsw-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x46000000 0x0 0x200000>; + reg-names = "cpsw_nuss"; + ranges; + dma-coherent; + clocks = <&k3_clks 18 22>; + clock-names = "fck"; + power-domains = <&k3_pds 18 TI_SCI_PD_EXCLUSIVE>; + ti,psil-base = <0x7000>; + cpsw-phy-sel = <&phy_sel>; + + dmas = <&mcu_udmap &mcu_cpsw 0 UDMA_DIR_TX>, + <&mcu_udmap &mcu_cpsw 1 UDMA_DIR_TX>, + <&mcu_udmap &mcu_cpsw 2 UDMA_DIR_TX>, + <&mcu_udmap &mcu_cpsw 3 UDMA_DIR_TX>, + <&mcu_udmap &mcu_cpsw 4 UDMA_DIR_TX>, + <&mcu_udmap &mcu_cpsw 5 UDMA_DIR_TX>, + <&mcu_udmap &mcu_cpsw 6 UDMA_DIR_TX>, + <&mcu_udmap &mcu_cpsw 7 UDMA_DIR_TX>, + <&mcu_udmap &mcu_cpsw 0 UDMA_DIR_RX>; + dma-names = "tx0", "tx1", "tx2", "tx3", + "tx4", "tx5", "tx6", "tx7", + "rx"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + host: host@0 { + reg = <0>; + ti,label = "host"; + }; + + cpsw_port1: port@1 { + reg = <1>; + ti,mac-only; + ti,label = "port1"; + ti,syscon-efuse = <&mcu_conf 0x200>; + }; + }; + + davinci_mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + }; + + cpts { + clocks = <&k3_clks 18 2>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + + ti,psil-config0 { + linux,udma-mode = ; + statictr-type = ; + ti,needs-epib; + ti,psd-size = <16>; + }; + + ti,psil-config1 { + linux,udma-mode = ; + statictr-type = ; + ti,needs-epib; + ti,psd-size = <16>; + }; + + ti,psil-config2 { + linux,udma-mode = ; + statictr-type = ; + ti,needs-epib; + ti,psd-size = <16>; + }; + + ti,psil-config3 { + linux,udma-mode = ; + statictr-type = ; + ti,needs-epib; + ti,psd-size = <16>; + }; + + ti,psil-config4 { + linux,udma-mode = ; + statictr-type = ; + ti,needs-epib; + ti,psd-size = <16>; + }; + + ti,psil-config5 { + linux,udma-mode = ; + statictr-type = ; + ti,needs-epib; + ti,psd-size = <16>; + }; + + ti,psil-config6 { + linux,udma-mode = ; + statictr-type = ; + ti,needs-epib; + ti,psd-size = <16>; + }; + + ti,psil-config7 { + linux,udma-mode = ; + statictr-type = ; + ti,needs-epib; + ti,psd-size = <16>; + }; + }; }; &secure_proxy_main { @@ -52,6 +237,29 @@ &wkup_pmx0 { u-boot,dm-spl; + mcu_cpsw_pins_default: mcu_cpsw_pins_default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */ + J721E_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */ + J721E_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* (M2) MCU_RGMII1_TD3 */ + J721E_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* (M3) MCU_RGMII1_TD2 */ + J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* (M4) MCU_RGMII1_TD1 */ + J721E_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* (M5) MCU_RGMII1_TD0 */ + J721E_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* (L2) MCU_RGMII1_RD3 */ + J721E_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */ + J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */ + J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */ + J721E_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* (N1) MCU_RGMII1_TXC */ + J721E_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */ + >; + }; + + mcu_mdio_pins_default: mcu_mdio1_pins_default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */ + J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */ + >; + }; }; &main_pmx0 { @@ -73,3 +281,33 @@ &main_sdhci1 { u-boot,dm-spl; }; + +&mcu_cpsw { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; +}; + +&davinci_mdio { + phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = ; + ti,fifo-depth = ; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&phy0>; +}; + +&mcu_cpsw { + reg = <0x0 0x46000000 0x0 0x200000>, + <0x0 0x40f00200 0x0 0x2>; + reg-names = "cpsw_nuss", "mac_efuse"; + + cpsw-phy-sel@40f04040 { + compatible = "ti,am654-cpsw-phy-sel"; + reg= <0x0 0x40f04040 0x0 0x4>; + reg-names = "gmii-sel"; + }; +}; -- 2.39.5