From 1f065e8fea3043578b60e6f39ff16928c463b92e Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 29 Jul 2021 10:39:08 +0200 Subject: [PATCH] rtc: zynqmp: Add support for ZynqMP RTC The whole driver logic is taken from Linux kernel but only set/get/reset functions are implemented. When device is power off RTC is power out of battery. Signed-off-by: Michal Simek --- MAINTAINERS | 1 + drivers/rtc/Kconfig | 7 ++ drivers/rtc/Makefile | 1 + drivers/rtc/zynqmp_rtc.c | 158 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 167 insertions(+) create mode 100644 drivers/rtc/zynqmp_rtc.c diff --git a/MAINTAINERS b/MAINTAINERS index 776ff703b9..483a458408 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -600,6 +600,7 @@ F: drivers/mtd/nand/raw/zynq_nand.c F: drivers/net/phy/xilinx_phy.c F: drivers/net/zynq_gem.c F: drivers/serial/serial_zynq.c +F: drivers/rtc/zynqmp_rtc.c F: drivers/spi/zynq_qspi.c F: drivers/spi/zynq_spi.c F: drivers/timer/cadence-ttc.c diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index cbdfddb80f..b6692e62df 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -195,4 +195,11 @@ config RTC_DAVINCI Say "yes" here to support the on chip real time clock present on TI OMAP1, AM33xx, DA8xx/OMAP-L13x, AM43xx and DRA7xx. +config RTC_ZYNQMP + bool "Enable ZynqMP RTC driver" + depends on ARCH_ZYNQMP + help + Say "yes" here to support the on chip real time clock + present on Xilinx ZynqMP SoC. + endmenu diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 331a49ab59..d621be6228 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -57,3 +57,4 @@ obj-$(CONFIG_RTC_STM32) += stm32_rtc.o obj-$(CONFIG_SANDBOX) += sandbox_rtc.o obj-$(CONFIG_RTC_X1205) += x1205.o obj-$(CONFIG_RTC_ABX80X) += abx80x.o +obj-$(CONFIG_RTC_ZYNQMP) += zynqmp_rtc.o diff --git a/drivers/rtc/zynqmp_rtc.c b/drivers/rtc/zynqmp_rtc.c new file mode 100644 index 0000000000..ab9b93ca97 --- /dev/null +++ b/drivers/rtc/zynqmp_rtc.c @@ -0,0 +1,158 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021, Xilinx, Inc. + */ + +#define LOG_CATEGORY UCLASS_RTC + +#include +#include +#include +#include + +/* RTC Registers */ +#define RTC_SET_TM_WR 0x00 +#define RTC_SET_TM_RD 0x04 +#define RTC_CALIB_WR 0x08 +#define RTC_CUR_TM 0x10 +#define RTC_INT_STS 0x20 +#define RTC_CTRL 0x40 + +#define RTC_INT_SEC BIT(0) +#define RTC_BATT_EN BIT(31) +#define RTC_CALIB_DEF 0x198233 +#define RTC_CALIB_MASK 0x1FFFFF + +struct zynqmp_rtc_priv { + fdt_addr_t base; + unsigned int calibval; +}; + +static int zynqmp_rtc_get(struct udevice *dev, struct rtc_time *tm) +{ + struct zynqmp_rtc_priv *priv = dev_get_priv(dev); + u32 status; + unsigned long read_time; + + status = readl(priv->base + RTC_INT_STS); + + if (status & RTC_INT_SEC) { + /* + * RTC has updated the CURRENT_TIME with the time written into + * SET_TIME_WRITE register. + */ + read_time = readl(priv->base + RTC_CUR_TM); + } else { + /* + * Time written in SET_TIME_WRITE has not yet updated into + * the seconds read register, so read the time from the + * SET_TIME_WRITE instead of CURRENT_TIME register. + * Since we add +1 sec while writing, we need to -1 sec while + * reading. + */ + read_time = readl(priv->base + RTC_SET_TM_RD) - 1; + } + + rtc_to_tm(read_time, tm); + + return 0; +} + +static int zynqmp_rtc_set(struct udevice *dev, const struct rtc_time *tm) +{ + struct zynqmp_rtc_priv *priv = dev_get_priv(dev); + unsigned long new_time = 0; + + if (tm) + /* + * The value written will be updated after 1 sec into the + * seconds read register, so we need to program time +1 sec + * to get the correct time on read. + */ + new_time = rtc_mktime(tm) + 1; + + /* + * Writing into calibration register will clear the Tick Counter and + * force the next second to be signaled exactly in 1 second period + */ + priv->calibval &= RTC_CALIB_MASK; + writel(priv->calibval, (priv->base + RTC_CALIB_WR)); + + writel(new_time, priv->base + RTC_SET_TM_WR); + + /* + * Clear the rtc interrupt status register after setting the + * time. During a read_time function, the code should read the + * RTC_INT_STATUS register and if bit 0 is still 0, it means + * that one second has not elapsed yet since RTC was set and + * the current time should be read from SET_TIME_READ register; + * otherwise, CURRENT_TIME register is read to report the time + */ + writel(RTC_INT_SEC, priv->base + RTC_INT_STS); + + return 0; +} + +static int zynqmp_rtc_reset(struct udevice *dev) +{ + return zynqmp_rtc_set(dev, NULL); +} + +static int zynqmp_rtc_init(struct udevice *dev) +{ + struct zynqmp_rtc_priv *priv = dev_get_priv(dev); + u32 rtc_ctrl; + + /* Enable RTC switch to battery when VCC_PSAUX is not available */ + rtc_ctrl = readl(priv->base + RTC_CTRL); + rtc_ctrl |= RTC_BATT_EN; + writel(rtc_ctrl, priv->base + RTC_CTRL); + + /* + * Based on crystal freq of 33.330 KHz + * set the seconds counter and enable, set fractions counter + * to default value suggested as per design spec + * to correct RTC delay in frequency over period of time. + */ + priv->calibval &= RTC_CALIB_MASK; + writel(priv->calibval, (priv->base + RTC_CALIB_WR)); + + return 0; +} + +static int zynqmp_rtc_probe(struct udevice *dev) +{ + struct zynqmp_rtc_priv *priv = dev_get_priv(dev); + int ret; + + priv->base = dev_read_addr(dev); + if (priv->base == FDT_ADDR_T_NONE) + return -EINVAL; + + priv->calibval = dev_read_u32_default(dev, "calibration", + RTC_CALIB_DEF); + + ret = zynqmp_rtc_init(dev); + + return ret; +} + +static const struct rtc_ops zynqmp_rtc_ops = { + .get = zynqmp_rtc_get, + .set = zynqmp_rtc_set, + .reset = zynqmp_rtc_reset, +}; + +static const struct udevice_id zynqmp_rtc_ids[] = { + { .compatible = "xlnx,zynqmp-rtc" }, + { } +}; + +U_BOOT_DRIVER(rtc_zynqmp) = { + .name = "rtc-zynqmp", + .id = UCLASS_RTC, + .probe = zynqmp_rtc_probe, + .of_match = zynqmp_rtc_ids, + .ops = &zynqmp_rtc_ops, + .priv_auto = sizeof(struct zynqmp_rtc_priv), +}; -- 2.39.5