Neil Armstrong [Fri, 28 Jun 2024 09:54:47 +0000 (11:54 +0200)]
firmware: psci: register PSCI power domains to stub driver
On some SoCs, like Qualcomm SoCs, the PSCI cluster power domain
is used by system-wide firmware interfaces to make sure none
of the CPUs are suspended before submitting requests.
While on U-boot we only use the first core and we never
suspend it, the Device Tree still references it and blocks
those nodes to be probed.
Simply bind the PSCI power-domain subnoded to a stub power
domain driver in order to solve the runtime dependencies.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tom Rini [Tue, 16 Jul 2024 16:20:14 +0000 (10:20 -0600)]
Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi
Nothing really major here, some rework of the SPL PMIC drivers, adding
support for the AXP717 on the way, which is showing up on newer boards
now, most prominently some Anbernic handheld gaming devices. The rest
is enabling Ethernet and SPI boot on the Allwinner V3s SoC, plus two
fixes. This also updates the "traditional U-Boot" DTs to that of kernel
v6.9. I will look into upgrading some SoCs to dts/upstream in the
coming cycle, though this will not cover all SoCs for now, as we carry
some non-mainline fix to improve compatibility with older kernels. Will
see how it goes, but for now we stick with the "old way".
The branch survived the gitlab CI run, and Linux boot testing on some
selected boards.
Michael Walle [Fri, 12 Jul 2024 17:14:56 +0000 (19:14 +0200)]
spi: sunxi: drop max_hz handling
The driver is trying to read the "spi-max-frequency" property of the
*controller* driver node. There is no such property. The
"spi-max-frequency" property belongs to the SPI devices on the bus.
Right now, the driver will always fall back to the default value of 1MHz
and thus flash reads are very slow with just about 215kb/s.
In fact, the SPI uclass will already take care of everything and we just
have to clamp the frequency to the values the driver/hardware supports.
Thus, drop the whole max_hz handling.
Signed-off-by: Michael Walle <mwalle@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com>
Andre Przywara [Thu, 9 May 2024 23:13:16 +0000 (00:13 +0100)]
sunxi: spl: h616: fix booting from high MMC offset
The BootROM in the Allwinner H616 tries to load the initial boot code
from sector 16 (8KB) of an SD card or eMMC device, but also looks at
sector 512 (256KB). This helps with GPT formatted cards.
A "high" boot offset is also used on previous SoCs, but it's sector 256
(128KB) there instead.
Extend the existing offset calculation code to consider the different
sector offset when running on an H616 SoC. This allows to load U-Boot
on any H616 device when the SPL is not located at 8KB.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Ryan Walklin <ryan@testtoast.com>
Michael Walle [Mon, 13 May 2024 23:43:19 +0000 (01:43 +0200)]
sunxi: SPL SPI: add support for the V3s SoC
The V3s is identical regarding register layout, clocks and resets to
the sun6i variants. Therefore, we can just add the MACH_SUN8I_V3S to
the sun6i compatible ones.
SPI boot was tested on a custom board with a Gigadevice GD25Q64 8MiB
SPI flash.
Signed-off-by: Michael Walle <mwalle@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Andre Przywara [Fri, 19 Apr 2024 16:59:52 +0000 (17:59 +0100)]
sunxi: dts: arm/arm64: update devicetree files from Linux-v6.9
Sync the devicetree files from the official Linux kernel tree, v6.9.
This is covering Allwinner SoCs with 32-bit and 64-bit ARM cores.
Besides some cosmectic changes, this adds S/PDIF, DMA, and thermal
support to the H616 .dtsi. Nothing that U-Boot needs for itself, but
helpful to pass on to kernels.
This also adds new devicetrees, for some LonganPi H616 board, and the
Remix Mini PC. The latter will get a defconfig next.
As before, this omits the non-backwards compatible changes to the R_INTC
controller, to remain compatible with older kernels.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Andre Przywara [Mon, 13 May 2024 23:47:09 +0000 (00:47 +0100)]
power: pmic: sunxi: use generic AXP SPL driver for AXP305
The generic AXP SPL driver implementation can cover all regulators we
need for the AXP305.
Add the descriptions for four of the six DC/DC regulators of the AXP305,
and enable that when CONFIG_AXP305_POWER is enabled. We won't need DCDC2
and DCDC3, but by using the position in the array for the index we keep
the code cleaner.
Also remove the old driver, and switch the Makefile to include the new,
generic driver.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Andre Przywara [Mon, 13 May 2024 23:46:59 +0000 (00:46 +0100)]
power: pmic: sunxi: use generic AXP SPL driver for AXP313
The generic AXP SPL driver implementation can cover all regulators we
need for the AXP313.
Add the descriptions for the three DC/DC regulators of the AXP313, and
enable that when CONFIG_AXP313_POWER is enabled. Also remove the old
driver, and switch the Makefile to include the new, generic version.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Andre Przywara [Thu, 9 May 2024 23:43:18 +0000 (00:43 +0100)]
power: pmic: sunxi: add AXP717 SPL support
On boards using the AXP717 PMIC, the DRAM rail is often not setup
correctly at reset time, so we have to program the PMIC very early in
the SPL, before running the DRAM initialisation.
Using the new generic AXP SPL driver, add the Kconfig options and
platform bits needed to support an AXP717 PMIC chip in I2C mode.
This allows to set up the correct voltage for the DRAM chips and the
CPU cores.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Ryan Walklin <ryan@testtoast.com>
So far we had a separate driver file for each AXP PMIC chip that we need
to support in the SPL. The code in there was largely similar, but
differed in many details.
Based on the idea of the DM AXP driver, introduce a data structure to
describe each regulator in a compact way. This is a simplified version
of the struct used in the DM driver, as we don't need to support the full
voltage range and not every regulator in the SPL.
For now we only support the DC/DC buck converters, since that's what we
need the SPL to configure, mostly. Also we get rid of the regulator name,
and hardcode the regulator number by its position in the array (first is
DCDC1, second is DCDC2, etc). We also drop support for the value table,
we ideally won't need that for the subset of regulators required.
At the end each regulator is described by a 10 bytes struct, so we avoid
blowing up the SPL footprint, but still can use generic code.
Each chip is supposed to be described separately, and protected by
ifdef's, to only build in the regulators needed for a particular board.
We also describe the bits to help identifying the AXP chip, and the
shutdown details in that section.
Add a generic driver, that exports axp_set_dcdc<x>() functions to set up
the buck converters. For now this just contains the bits for the (new)
AXP717, but it's not wired up anywhere yet.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Andre Przywara [Tue, 14 May 2024 00:12:34 +0000 (01:12 +0100)]
power: pmic: sunxi: only build AXP drivers for SPL
The axp<xxx>.c drivers are only used for the SPL, for U-Boot proper we
have a separate, DM compliant driver.
Mask the build instructions with CONFIG_SPL_BUILD, to avoid them being
build for U-Boot proper as well.
The AXP221 driver defines axp_get_sid(), which is used in the U-Boot
proper cpuinfo() code, and some old LCD code directly calls axp_set_eldo(),
so we keep that driver outside the new guards. This will be fixed properly
later.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tom Rini [Mon, 15 Jul 2024 14:21:46 +0000 (08:21 -0600)]
Merge tag 'efi-2024-10-rc1-2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2024-10-rc1-2
Documentation:
* use current versions of certifi and urllib3 for building documentation
* add bootelf command documentation
* correct the description of the Goldfish RTC driver
* correct heading level of itest examples
UEFI:
* print device-tree in dtbdump.efi
* consider CONFIG_EFI_IGNORE_OSINDICATIONS in TestEfiCapsuleFirmwareRaw
* correct cmd_capsule_esl_gen invocation in scripts/Makefile.lib
* use capsule CRT instead of ESL file when building capsules
Others:
* let ENV_IS_IN_EXT4 enable SYS_MMC_ENV_DEV
* check if CONFIG_SYS_MMC_ENV_DEV is defined in mmc_get_env_dev
Tony Dinh [Mon, 8 Jul 2024 04:39:03 +0000 (21:39 -0700)]
arm: mvebu: Enable bootstd and other modernization for Synology DS414 (Armada XP) board
- Switch to standard boot (in include/configs/ds414.h and
configs/ds414_defconfig)
- Implement board_late_init() to ensure successful enumeration
of USB3 devices
- Remove unnecessary checkboard()
- Updated IDENT_STRING to indicate this u-boot supports both Synology
DS414 and DS214+ boards
- Add SYS_THUMB_BUILD to reduce binary size
- Add NET_RANDOM_ETHADDR
- Add CONFIG_LBA48 and CONFIG_SYS_64BIT_LBA to support >2TB HDD/SDD
Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Phil Sutter <phil@nwl.cc>
Tony Dinh [Wed, 22 May 2024 21:51:59 +0000 (14:51 -0700)]
arm: dts: mvebu: Migrate to upstream DT for Synology DS116 (Armada 385) board
Enable OF_UPSTREAM to use upstream DT and add marvell/ prefix to the
DEFAULT_DEVICE_TREE in DS116 defconfig. Remove current DTS in
arch/arm/dts/ directory.
Signed-off-by: Tony Dinh <mibodhi@gmail.com> Acked-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Stefan Roese <sr@denx.de>
bananapi_m64_defconfig with CONFIG_ENV_IS_NOWHERE results in:
board/sunxi/board.c: In function 'mmc_get_env_dev':
board/sunxi/board.c:535:24: error:
'CONFIG_SYS_MMC_ENV_DEV' undeclared (first use in this function)
535 | return CONFIG_SYS_MMC_ENV_DEV;
| ^~~~~~~~~~~~~~~~~~~~~~
Check if CONFIG_SYS_MMC_ENV_DEV is defined.
Fixes: 1011ebc72bda ("sunxi: Select environment MMC based on boot device") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tom Rini [Mon, 8 Jul 2024 15:18:13 +0000 (09:18 -0600)]
doc/sphinx/requirements.txt: Bump certifi and urllib3
As reported by GitHub dependabot, both of these packages should be
bumped to their latest versions to address security issues (neither of
which has a CVE assigned).
Reported-by: GitHub dependabot Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
The tests we currently have expect the firmware update to fail
when OsIndications is not set properly. However, we have a Kconfig flag
that explicitly ignores that variable. Adjust the tests accordingly
The dtbdump.efi binary can be used for testing the EFI_DT_FIXUP_PROTOCOL.
It provides a command to load a file and have it fixed up and a
command to save the resulting file.
Add a command 'dump' for displaying the device-tree.
scripts/Makefile.lib: EFI: Use capsule CRT instead of ESL file
The EFI Capsule ESL file (EFI Signature List File) used for authentication
is a binary generated from the EFI Capsule public key certificate. Instead
of including it in the source repo, automatically generate it from the
certificate file during the build process.
Currently, sandbox is the only device using this, so removed its ESL file
and set the (new) CONFIG_EFI_CAPSULE_CRT_FILE config to point to its public
key certificate.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
The clock definitions in <dt-bindings/clock/r8a779?-clock.h> were
superseded by those in <dt-bindings/clock/r8a779?-cpg-mssr.h> a long
time ago.
In fact U-Boot never used <dt-bindings/clock/r8a779?-clock.h>.
The unused headers, their replacements, and the corresponding
r8a779?.dtsi files were introduced together in U-Boot v2018.03.
Fixes: 16b6e4aa3732cee1 ("ARM: dts: rmobile: Import R8A7790 DTS from Linux 4.15-rc8") Fixes: edd15fcffba31452 ("ARM: dts: rmobile: Import R8A7791 DTS from Linux 4.15-rc8") Fixes: a3fb9ff3b33fae05 ("ARM: dts: rmobile: Import R8A7792 DTS from Linux 4.15-rc8") Fixes: 92aa09959271d08f ("ARM: dts: rmobile: Import R8A7793 DTS from Linux 4.15-rc8") Fixes: 9a26fc5a73fe2369 ("ARM: dts: rmobile: Import R8A7794 DTS from Linux 4.15-rc8") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tom Rini [Sat, 13 Jul 2024 14:38:38 +0000 (08:38 -0600)]
turris_1x: Normalize Kconfig usage
We don't set many options in the board Kconfig entry file but instead
use defconfigs, select in some cases on the target itself, or update the
"default" options of the main entries when needed. In this case we can
remove most of the board Kconfig entries and just add them to the
defconfig like other platforms.
Tom Rini [Fri, 12 Jul 2024 19:07:54 +0000 (13:07 -0600)]
Merge patch series "Add Turris 1.x board"
Marek Mojík <marek.mojik@nic.cz> says:
Hello all,
this is a continuation of previous work by Pali to add support for the
Turris 1.x board. As the patches were based on u-boot v2022.04, a
nontrivial rebasing was needed.
Some notes:
- Some options that are in SD defconfig are disabled in NOR defconfig
because over the years u-boot grew and the old NOR defconfig will not
fit into NOR memory.
- SD boot with RAM larger than 2GB will only allocate 2GB of RAM (We
were not able to fix this yet)
Pali Rohár [Thu, 6 Jun 2024 16:33:26 +0000 (18:33 +0200)]
powerpc: Add support for CZ.NIC Turris 1.x routers
Add support for CZ.NIC Turris 1.x routers.
CZ.NIC Turris 1.0 (RTRS01) and 1.1 (RTRS02) are open source routers, they
have dual-core PowerPC Freescale P2020 CPU and are based on reference
Freescale P2020RDB-PC-A board design.
Hardware design is fully open source, all firmware and hardware design
files are available at Turris project website:
The P2020 BootROM can load U-Boot either from NOR flash or from SD card.
We add the new defconfigs, turris_1x_nor_defconfig, which configures
U-Boot for building the NOR image, and turris_1x_sdcard_defconfig, which
configures U-Boot for building an image suitable for SD card.
The defconfig for NOR image is stripped-down a - many config options
enabled in SD defconfig are disabled for NOR defconfig. This is because
U-Boot grew non-trivially in the last two years and it would not fit
into the space allocated for U-Boot in the NOR memory. In the future we
may try to use LTO to reduce the size of the code and enable more
options.
The design of CZ.NIC Turris 1.x routers is based on Freescale P2020RDB-PC-A
board, so some code from boards/freescale/p1_p2_rdb_pc is used and linked
into Turris 1.x board code.
Turris 1.x code in this patch uses modern distroboot and can boot Linux
kernel from various locations, including NAND, SD card, USB flash disks,
NVMe disks or SATA disks (connected to extra SATA/SCSI PCIe controllers).
Via distroboot is implemented also rescue NOR boot for factory recovery,
triggered by reset button, like on other existing Turris routers.
SD boot with RAM larger than 2GB will only allocate 2GB of RAM (We were
not able to fix this yet)
[ Because various CONFIG_ macros were migrated to Kconfig since the last
time this worked on upstream U-Boot (in 2022), a non-trivial rebasing
was needed and some issues were solved. ]
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Mojík <marek.mojik@nic.cz> Reviewed-by: Marek Behún <kabel@kernel.org>
Marek Mojík [Thu, 6 Jun 2024 16:33:25 +0000 (18:33 +0200)]
powerpc: use CONFIG_IS_ENABLED() when checking for DM_SERIAL in include/asm/config.h
Use the CONFIG_IS_ENABLED() macro when checking for DM_SERIAL so that
CFG_SYS_NS16550_CLK is not defined as get_serial_clock() in SPL if SPL
does not have DM_SERIAL enabled.
Signed-off-by: Marek Mojík <marek.mojik@nic.cz> Reviewed-by: Marek Behún <kabel@kernel.org>
Pali Rohár [Thu, 6 Jun 2024 16:33:23 +0000 (18:33 +0200)]
powerpc: mpc8xxx: Extend find_law() to find_law_by_addr_id()
The find_law() function searches for LAW just by physical address. This
is unsuitable for cases with overlapping LAWs. Extend it to
find_law_by_addr_id(), which searches for LAW by physical address and
target id.
Add a static inline definition of the original find_law() into fsl_law.h
header.
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Mojík <marek.mojik@nic.cz> Reviewed-by: Marek Behún <kabel@kernel.org>
Pali Rohár [Thu, 6 Jun 2024 16:33:21 +0000 (18:33 +0200)]
board_f: Add support for CONFIG_OF_BOARD_FIXUP for XIP images
When U-Boot is running from flash memory (execute in place) then
gd->fdt_blob before relocation points to read-only flash memory.
So U-Boot calls board_fix_fdt() with read-only gd->fdt_blob pointer which
cause immediate CPU crash when callback is trying to modify gd->fdt_blob.
Fix this issue by introducing a new config option OF_INITIAL_DTB_READONLY
which moves fix_fdt callback after the reloc_fdt callback. This makes
CONFIG_OF_BOARD_FIXUP working also if U-Boot before relocation is not
running from read/write (S)RAM memory.
This is required for mpc85xx boards when booting from flash NOR.
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Mojík <marek.mojik@nic.cz> Reviewed-by: Marek Behún <kabel@kernel.org>
This was added in commit 45a6d231b2f (bcm2835_wdt: support for the
BCM2835/2836 watchdog), which did do 'select HW_WATCHDOG'. That
incarnation of the watchdog driver later got removed in c7adc0b5f98 (watchdog: bcm2835_wdt: Remove unused BCM283x watchdog
driver and its references), but this block was left behind.
Another rpi watchdog driver has since been added, but that does not
select HW_WATCHDOG, so this remains dead and unused. Remove it.
Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
This empty stub was originally added as one branch of an #ifdef in
commit 45a6d231b2f (bcm2835_wdt: support for the BCM2835/2836
watchdog). That incarnation of the rpi watchdog driver was later
removed in c7adc0b5f98 (watchdog: bcm2835_wdt: Remove unused BCM283x
watchdog driver and its references), but this now unused stub was left
behind. The later (re-)added rpi watchdog driver does not define a
hw_watchdog_disable() function, as that is properly integrated in the
watchdog framework.
Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
With the ability to generate this SMBIOS details autmotically the
small amount of details that this patch provided are generated
automatically so this is now obsolete so we can just drop it.
Usb gadget:
- A welcome cleanup: epautoconf workaround is dropped to use
.match_ep() instead
- Introduce handle_interrupts() op for USB_GADGET_GENERIC, which
allows a per-driver interrupt handling
Fastboot:
- Fix mssing include when building with TCP only
The ARASAN MMC controller on Keystone 3 class of devices need the SDCD
line to be connected for proper functioning.
In cases where this can't be connected, add a quirk to force the
controller into test mode and set the TESTCD bit. Use the flag
"ti,fails-without-test-cd", to implement this above quirk when required.
Additionally, this quirk also avoids waiting for the controller debounce
time.
This commit is similar to linux kernel commit c7666240ec76
("drivers: mmc: sdhci_am654: Add the quirk to set TESTCD bit").
When building with the igep00x0_defconfig, the following warning is shown:
$ make -j $(nproc)
...
LD spl/u-boot-spl
OBJCOPY spl/u-boot-spl-nodtb.bin
SYM spl/u-boot-spl.sym
CAT spl/u-boot-spl-dtb.bin
COPY spl/u-boot-spl.bin
MKIMAGE MLO
===================== WARNING ======================
This board does not use CONFIG_DM_I2C (Driver Model
for I2C drivers). Please update the board to use
CONFIG_DM_I2C before the v2022.04 release. Failure to
update by the deadline may result in board removal.
See doc/develop/driver-model/migration.rst for more info.
====================================================
The only reason why I2C is enabled for the IGEP boards is that the TWL4030
driver requires it.
But both the TWL4034 and the OMAP I2C controller drivers were converted to
the driver model by commits daa69ffe3d4d ("drivers: i2c: omap24xx_i2c:
adopt omap_i2c driver to driver model") and fb1b7712ad3f power: make most
tps drivers and the twl4030 driver compatible with DM_I2C") respectively.
So there's no reason anymore to keep using the I2C legacy API and instead
the DM_I2C option could just be enabled.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Enric Balletbo i Serra <eballetbo@gmail.com>
projects / u-boot.git / log