Emil Kronborg [Wed, 19 Jun 2024 10:57:49 +0000 (10:57 +0000)]
arm: davinci: remove unused watchdog functions
The davinci_hw_watchdog_ functions are defined but never called from
anywhere. Commit 881ae794b93b ("calimain: remove board") eliminated the
last call to these functions.
Signed-off-by: Emil Kronborg <emil.kronborg@protonmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
Alex Shumsky [Tue, 18 Jun 2024 21:41:38 +0000 (00:41 +0300)]
fs: btrfs: fix out of bounds write
Fix btrfs_read/read_and_truncate_page write out of bounds of destination
buffer. Old behavior break bootstd malloc'd buffers of exact file size.
Previously this OOB write have not been noticed because distroboot usually
read files into huge static memory areas.
Tom Rini [Wed, 26 Jun 2024 15:55:29 +0000 (09:55 -0600)]
Merge patch series "k3-am625-beagleplay: Add symlinks for tiboot3 and tispl"
Dhruva Gole <d-gole@ti.com> says:
Add symlinks for both tiboot3.bin and tispl.bin because a user has to
anyway rename these files to get the platform to boot up.
Also update the documentation to reflect above change.
Dhruva Gole [Tue, 18 Jun 2024 04:49:45 +0000 (10:19 +0530)]
arm: dts: k3-am625-beagleplay: Add symlinks for tiboot3 and tispl
Add symlinks for both tiboot3.bin and tispl.bin because a user has to
anyway rename these files to get the platform to boot up.
This just makes it more intuitive and convenient.
Dhruva Gole [Tue, 18 Jun 2024 04:53:18 +0000 (10:23 +0530)]
board: beagleplay: Fix the bootpart to pick from root partition
The Kernel Image and DTB files are supposed to be picked from the rootfs
of the SD Card, this fails in legacy boot flow because bootpart is set
to 1:1. Fix it.
MCU_CLKOUT0 output can be driven by two different clock inputs:
one at 25 MHz and another at 50 MHz. Currently, the 25 MHz input
clock is not selectable due to a duplication of the 50 MHz clock input
in the mux configuration. This commit corrects the parent clock mux
configuration, making the 25 MHz input clock selectable.
Tom Rini [Wed, 26 Jun 2024 15:31:05 +0000 (09:31 -0600)]
Merge patch series "Azure: Correct comment about the strategy in the world matrix build"
Tom Rini <trini@konsulko.com> says:
This fixes a number of small issues with the structure of the Azure jobs
and then ensures that we will build all of the possible boards that we
know about, in this CI run.
Tom Rini [Tue, 18 Jun 2024 14:18:51 +0000 (08:18 -0600)]
Azure: Count all of the machines we would build
Now that we have each stage of the world build using variables to define
what it will attempt to build, and that we have added in missing
machines, add a job to make sure that we would always be building
everything.
Tom Rini [Tue, 18 Jun 2024 14:18:50 +0000 (08:18 -0600)]
Azure: Update some job breakdowns so we build the world again
As part of commit 9aeac898da66 ("Azure: Rework build the world jobs") I
made a few mistakes. An errant '_' meant that we built neither at91 nor
kirkwood platforms. Further, the non-freescale (NXP) "LS1xxx" platforms
were also not being built. Adjust some jobs to have these be built
again.
Fixes: 9aeac898da66 ("Azure: Rework build the world jobs") Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 18 Jun 2024 14:18:49 +0000 (08:18 -0600)]
Azure: Spell out the "everything" job
In order to get the list of boards that will be done in a "dry run"
build we need to have something listed and not just an exclude list.
Populate the job with all architecture directories except arm and
powerpc.
Tom Rini [Tue, 18 Jun 2024 14:18:48 +0000 (08:18 -0600)]
Azure: Rework how we define what to build in the world build
Instead of defining BUILDMAN to the value we'll build in each part of
the matrix job, define a variable with that name and have it list what
to build. This will allow us to reference these multiple times
consistently later on.
Tom Rini [Tue, 18 Jun 2024 14:18:47 +0000 (08:18 -0600)]
Azure: Correct comment about the strategy in the world matrix build
At this point noting that we have a split in our job similar to TravisCI
(which we have not used in years) isn't helpful, and is also not true
anymore either. Instead, explain that we split the world up in to 10
jobs as that's the maximum we can have going in parallel on the free
tier of Azure.
Tom Rini [Tue, 25 Jun 2024 23:22:36 +0000 (17:22 -0600)]
Merge patch series "arm64: add a software pagetable walker"
Caleb Connolly <caleb.connolly@linaro.org> says:
MMU issues are some of the most frustrating to debug. To make this
slightly less unbearable, introduce a software pagetable walker for
ARMv8. This can be called to dump a pagetable with the default
formatter, or a custom callback can be provided to implement more
complicated parsing.
This can also be useful to dump the pagetable used by a previous
bootloader stage (by reading out the ttbr register).
Here is an example of the output when walking U-Boot's own memory map
on a Qualcomm RB3 board:
Caleb Connolly [Mon, 17 Jun 2024 08:03:48 +0000 (10:03 +0200)]
arm64: add software pagetable walker
Add a basic software implementation of the ARM64 pagetable walker. This
can be used for debugging U-Boot's pagetable, as well as dumping the
pagetable from the previous bootloader stage if it used one (by reading
out the ttbr address).
One can either call dump_pagetable() to print the pagetable to the
console with the default formatter, or implement their own pagetable
handler using walke_pagetable() with a custom pte_walker_cb_t callback.
All of the added code is discarded when unused, hence there is no need
to add an additional Kconfig option for this.
- Enable SPL DTO application support for i.MX8MP DHCOM PDK2.
- Migrate imx8mn_bsh_smm_s2 and imx6ulz_bsh_smm_m2 to OF_UPSTREAM.
- Drop redundant imports with dts/upstream.
- Miscellaneous improvements for Gateworks i.MX8M boards.
Jayesh Choudhary [Fri, 14 Jun 2024 12:44:39 +0000 (18:14 +0530)]
arm: mach-k3: j784s4: Enable QoS for DSS
Enable Quality of Service (QoS) blocks for Display SubSystem (DSS), by
servicing the DSS - DDR traffic from the Real-Time (RT) queue. This is
done by setting the DSS DMA orderID to greater than 9.
Before setting up the QoS, the ORDERID needs to be mapped to VBUSM sources
using setup_navss_nb() function call that sets the threadmap for NBSS
registers. (Section 10.2.9.2.10 "Quality of Service" in TRM[0])
Section 3.2.1 "Quality of Service (QoS)" in the TRM[0] provide more
details.
Jayesh Choudhary [Fri, 14 Jun 2024 12:44:38 +0000 (18:14 +0530)]
arm: mach-k3: j721s2: Enable QoS for DSS
Enable Quality of Service (QoS) blocks for Display SubSystem (DSS), by
servicing the DSS - DDR traffic from the Real-Time (RT) queue. This is
done by setting the DSS DMA orderID to greater than 9.
Before setting up the QoS, the ORDERID needs to be mapped to VBUSM sources
using setup_navss_nb() function call that sets the threadmap for NBSS
registers. (Section 10.2.9.2.10 "Quality of Service" in TRM[0])
Section 3.2.1 "Quality of Service (QoS)" in the TRM[0] provide more
details.
Jayesh Choudhary [Fri, 14 Jun 2024 12:44:37 +0000 (18:14 +0530)]
arm: mach-k3: j721e: Enable QoS for DSS
Enable Quality of Service (QoS) blocks for Display SubSystem (DSS), by
servicing the DSS - DDR traffic from the Real-Time (RT) queue. This is
done by setting the DSS DMA orderID to greater than 7.
Before setting up the QoS, the ORDERID needs to be mapped to VBUSM sources
using setup_navss_nb() function call that sets the threadmap for NBSS
registers. (Section 10.2.10.1.2 "NB Parameters" in TRM[0])
Section 3.3.2 "Quality of Service (QoS)" in the TRM[0] provide more
details.
[0]: https://www.ti.com/lit/zip/spruil1
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Reviewed-by: Andrew Davis <afd@ti.com>
Jayesh Choudhary [Fri, 14 Jun 2024 12:44:36 +0000 (18:14 +0530)]
arm: mach-k3: am62a: Simplify the logic for QOS reg and val propagation
For the QOS registers, instead of using the raw values for calculation
for each reg field, use a defined macro which takes in argument for all
the reg fields to get the desired value.
Do the similar simplification for QOS register and group registers and
make the corresponding changes for am62a_qos_uboot file.
Suggested-by: Andrew Davis <afd@ti.com> Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Acked-by: Andrew Davis <afd@ti.com>
Jayesh Choudhary [Fri, 14 Jun 2024 12:44:35 +0000 (18:14 +0530)]
arm: mach-k3: am62a_qos: Move common bit MACROS to k3_qos header file
QoS bit mapping are common across all K3 SoCs so move those defines
to common header file (k3_qos.h).
This ensures that we do not define these for each SoC.
Tom Rini [Mon, 24 Jun 2024 15:49:37 +0000 (09:49 -0600)]
Merge tag 'tpm-master-24062024' of https://source.denx.de/u-boot/custodians/u-boot-tpm
When the EFI TCG measurement code moved from EFI to the TPM subsystem for
general use some prototypes changed from returning efi_status_t to int,
which is more appropriate for the non-EFI APIs. However, some of the
EFI callsites never changed and we ended up assigning the int value to
efi_status_t.
This is unlikely to cause any problems, apart from returning invalid
values on failures and violating the EFI spec.
Marek Vasut [Sun, 23 Jun 2024 18:44:19 +0000 (20:44 +0200)]
ARM: imx: Enable SPL DTO application support for i.MX8MP DHCOM PDK2
Enable SPL DTO support to apply matching SoM specific DTOs to cater
for the SoM differences in DH i.MX8MP DHCOM PDK2 configuration. This
is already enabled in DH i.MX8MP DHCOM PDK3 configuration so align
the two configurations.
Fixes: ad1158c50e0e ("arm64: dts: imx8mp: Switch to DT overlays for i.MX8MP DHCOM SoM") Signed-off-by: Marek Vasut <marex@denx.de>
Tim Harvey [Thu, 20 Jun 2024 01:30:18 +0000 (18:30 -0700)]
imx8mp-venice-gw702x: Drop EQos clock workaround
The assigned-clock no longer have to be dropped, the clock are now
defined in clk-imx8mp.c and used by DWMAC driver to configure the
DWMAC clock. Drop the workarounds from U-Boot specific DT extras.
Having the clocks dropped causes the EQoS to be non-functional.
See commit c7ea9612df0f ("arm64: dts: imx8mp: Drop EQoS clock
workaround").
Tim Harvey [Wed, 19 Jun 2024 21:13:39 +0000 (14:13 -0700)]
board: gateworks: venice: add print for GPY111 PHY name
Due to supply chain issues Venice boards use either a DP83867 or a
GPY111 RGMII PHY. We already print an identifier for the DP83867 so add
one for the GPY111 to better identify what PHY is on a board:
Tim Harvey [Wed, 19 Jun 2024 21:13:22 +0000 (14:13 -0700)]
board: gateworks: venice: delay before reading GSC EEPROM
Extensive testing has shown that at higher temperatures operating
without a GSC backup battery, the GSC needs a small delay after
releasing the I2C SDA/SCL pins before it is ready to handle I2C
requests.
Add a delay to avoid errors such as:
wait_for_sr_state: Arbitration lost sr=93 cr=80 state=2020
i2c_init_transfer: failed for chip 0x20 retry=0
Tim Harvey [Wed, 19 Jun 2024 21:12:58 +0000 (14:12 -0700)]
board: gateworks: venice: enable GSC supervisor for new board models
The Gateworks System Controller (GSC) has a voltage supervisor which is
disabled by default. On older boards we want to maintian this but on
newer boards we wish to enable the voltage supervisor.
The Gateworks System Controller (GSC) can disable the board primary
power supply by driving a pin to a FET high. On older board models
the leakage of the GSC may exceed the leakage of the FET causing this
signal slowly rise when the GSC battery is low and the board is in a
powered down state resulting in the board being kept in a disabled
state.
Newer boards have a hardware fix to avoid this leakage and thus should
enable the voltage supervisor.
hence these aren't dropped yet but there was an unused header:
- include/dt-bindings/pinctrl/pins-imx8mq.h
which has been dropped as well. There shouldn't be any funtional impact
with this change but it rather allows iMX platforms to use upstream
dt-bindings headers in a backwards compatible manner.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Patrick Barsanti [Mon, 24 Jun 2024 12:13:11 +0000 (09:13 -0300)]
arm: fsl: imx8mn_bsh_smm_s2: Migrate to OF_UPSTREAM
Migrate imx8mn_bsh_smm_s2 and imx8mn_bsh_smm_s2pro boards to OF_UPSTREAM.
Signed-off-by: Patrick Barsanti <patrick.barsanti@amarulasolutions.com> Tested-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
Ilias Apalodimas [Sat, 22 Jun 2024 14:35:38 +0000 (17:35 +0300)]
efi_loader: fix the return values on efi_tcg
A while back we moved the core functions of the EFI TCG protocol to the
TPM APIs in order for them to be used with bootm, booti etc.
Some prototypes changed from returning efi_status_t to int, which is more
appropriate for the non-EFI APIs. However, some of the EFI callsites never
changed and we ended up assigning the int value to efi_status_t.
This is unlikely to cause any problems, apart from returning invalid
values on failures and violating the EFI spec. Let's fix them
by looking at the new return code and map it to the proper EFI return
code on failures.
Fixes: commit 97707f12fdab ("tpm: Support boot measurements") Fixes: commit d6b55a420cfc ("efi_loader: startup the tpm device when installing the protocol") Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Ilias Apalodimas [Sat, 22 Jun 2024 14:35:37 +0000 (17:35 +0300)]
tpm: fix the return code, if the eventlog buffer is full
We currently return 'No space left on device' if the eventlong buffer
we allocated is not enough. On a similar check later on that function
during the call to tcg2_log_init() we return 'No buffer space
available'. So switch both error codes to -ENOBUFS since we are always
checking a buffer and not a device.
Fixes: commit 97707f12fdab ("tpm: Support boot measurements") Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
doc: board: ti: Add capsule documentation for TI K3 devices
Added introductory documentation about capsule support for TI devices,
including links to more detailed information.
Also added a note in the build secction that points to the host package
dependency docs.
This patch is followup from a request in the series introducing capsule
update for TI boards.
https://lore.kernel.org/r/20240618145058.552eapp5iiz772ej@hardcore
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Alexander Dahl [Fri, 21 Jun 2024 07:47:20 +0000 (09:47 +0200)]
doc: develop: testing: Fix reference to test writing section
Add missing colon in :doc: link.
Fixes: fc3283314539 ("doc: Explain briefly how to write new tests") Signed-off-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Alexander Dahl [Fri, 21 Jun 2024 07:47:19 +0000 (09:47 +0200)]
doc: develop: testing: Fix broken reference to pytest suite help
This should have been adapted directly with or after v2021.01-693-gca6583d4e08 ("doc: move test/README to HTML
documentation") or v2021.01-694-g0157619d5c8 ("doc: move
test/py/README.md to HTML documentation") already.
Signed-off-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Thu, 20 Jun 2024 14:46:06 +0000 (08:46 -0600)]
Merge patch series "boot: fix crash in bootflow menu with EFI BOOTMGR support + typos"
Quentin Schulz <foss+uboot@0leil.net> says:
bootflow menu currently crashes U-Boot with a NULL pointer dereference
because bootflow->dev is NULL for global bootmeths (such as EFI BOOTMGR).
Therefore, let's check if the bootflow is associated with a global
bootmeth before trying to make it part of the menu.
While this makes U-Boot not crash anymore, bootflow menu doesn't work
for me (I have never had a happy path with it, but I haven't actually
tried it before today :) ) and this was basically just implemented
following Simon's suggestion sent over IRC. No clue if this is enough or
just a quick band-aid patch.
Tom Rini [Thu, 20 Jun 2024 14:36:06 +0000 (08:36 -0600)]
Merge patch series "lib: smbios: Extend driver with using sysinfo driver"
Michal Simek <michal.simek@amd.com> says:
Hi,
currently only DT way is supported and it is added directly to lib/smbios.c
but I think DT and env is only one way how information can be found that's
why this series is improving handling with using sysinfo driver which can
be platform specific.
At the end of day DT should be taken from smbios.c and put to sysinfo DT
driver instead of implementing it directly in this generic file.
Quentin Schulz [Wed, 12 Jun 2024 14:58:49 +0000 (16:58 +0200)]
boot: bootflow_menu: fix crash for EFI BOOTMGR global bootmeth
The global bootmeths don't set the dev in bootflow struct which means
the dev_get_parent(bflow->dev) triggers a NULL-pointer dereference and
crash U-Boot.
So before trying to handle a bootflow, check that the associated
bootmeth isn't global, otherwise skip it.
Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Simon Glass <sjg@chromium.org>
Michal Simek [Fri, 26 Apr 2024 13:38:13 +0000 (15:38 +0200)]
lib: smbios: Detect system properties via SYSINFO IDs
Code is pretty much supports only DT properties and completely ignore
information coming from sysinfo driver.
Code is calling smbios_add_prop() which calls with
smbios_add_prop_si(SYSINFO_ID_NONE). But SYSINFO_ID_NONE can't
differentiate different entries from sysinfo driver.
That's why introduce separate SYSINFO macros which can be used in sysinfo
driver and passed to smbios structure.
Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Michal Simek [Fri, 26 Apr 2024 13:38:12 +0000 (15:38 +0200)]
lib: smbios: Let detect the system via sysinfo
Currently code looks like that it sysinfo drivers are supported but
actually none checking that system is detected. That's why call
sysinfo_detect() to make sure that priv->detected in sysinfo uclass is
setup hence information from driver can be passed to smbios.
Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Simon Glass <sjg@chromium.org>
board: ti: am64x: Set storage_interface and fw_dev_part ENVs
When ICSSG driver is enabled (CONFIG_TI_ICSSG_PRUETH=y) set
storage_interface and fw_dev_part env variables.
These variables need be set appropriately in order to load different
ICSSG firmwares needed for ICSSG driver. By default the storage
interface is mmc and the partition is 1:2. User can modify this based on
their needs.
Tom Rini [Wed, 19 Jun 2024 18:08:49 +0000 (12:08 -0600)]
Merge patch series "Add basic U-Boot Support for J722S-EVM"
Jayesh Choudhary <j-choudhary@ti.com> says:
Hello there,
This series add the U-Boot support for our new platform of K3-SOC
family - J722S-EVM which is a superset of AM62P. It shares the same
memory map and thus the nodes are being reused from AM62P includes
instead of duplicating the definitions.
Some highlights of J722S SoC (in addition to AM62P SoC features) are:
- Two Cortex-R5F for Functional Safety or general-purpose usage and
two C7x floating point vector DSP with Matrix Multiply Accelerator
for deep learning.
- Vision Processing Accelerator (VPAC) with image signal processor
and Depth and Motion Processing Accelerator (DMPAC).
- 7xUARTs, 3xSPI, 5xI2C, 2xUSB2, 2xCAN-FD, 3xMMC and SD, GPMC for
NAND/FPGA connection, OSPI memory controller, 5xMcASP for audio,
4xCSI-RX for Camera, 1 PCIe Gen3 controller, USB3.0 eCAP/eQEP,
ePWM, among other peripherals.
Tom Rini [Tue, 18 Jun 2024 16:47:10 +0000 (10:47 -0600)]
Merge patch series "EFI: ti: Enable EFI capsule updates"
Jonathan Humphreys <j-humphreys@ti.com> says:
Enable on disk capsule updates, which includes defining the firmware
components (tiboot3, spl, u-boot) and enabling processing of raw capsule
updates.
This is enabled for several TI SoC based platforms: AM64, AM62, AM62p,
AM69, BeaglePlay, J7, and BeagleboneAI. The configs to enable this are in a
single base config file. This will make it more scalable to add additional
EFI capsule features (like authentication) across all TI boards that have
capsules enabled.
This series also includes enabling serial flash DFU for AM62 and MMC DFU
for beagleplay.
board: sk-am69: Define capsule update firmware info
Define the firmware components updatable via EFI capsule update, including
defining capsule GUIDs for the various firmware components for the AM69
SK.
TODO: possibly make the struct's sk specific.
TODO: add doc commit (and make sure doc is sk/NOR specific, and add OSIP
boot mode)
TODO: update doc to show sk defconfig when building
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
board: beagleboneai64: Define capsule update firmware info
Define the firmware components updatable via EFI capsule update, including
defining capsule GUIDs for the various firmware components for the
BeagleBoneAI64.
Note this involved creating BeagleBoneAI64's own beagleboneai64.h board
header file instead of reusing j721e_evm's.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
board: am62px: Define capsule update firmware info
Define the firmware components updatable via EFI capsule update, including
defining capsule GUIDs for the various firmware components for the AM62px
SK.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Define the firmware components updatable via EFI capsule update, including
defining capsule GUIDs for the various firmware components for the AM62x
SK.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
board: beagleplay: Define capsule update firmware info
Define the firmware components updatable via EFI capsule update, including
defining capsule GUIDs for the various firmware components for the
BeaglePlay.
Note this involved creating BeaglePlay's own beagleplay.h board header file
instead of reusing am62_evm's.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Define the firmware components updatable via EFI capsule update, including
defining capsule GUIDs for the various firmware components for the
SK-TDA4VM.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
projects / u-boot.git / log