Udit Kumar [Fri, 6 Oct 2023 04:45:55 +0000 (10:15 +0530)]
configs: j721s2_evm_r5_defconfig: Increase malloc pool size in DRAM
The malloc capacity in DRAM at R5 SPL is set to 1MB which isn't
sufficient to load the new tispl.bin to
enable loading of tispl.bin the size is increased by 256KB to 1.25MB.
Reid Tonking [Thu, 5 Oct 2023 18:12:58 +0000 (13:12 -0500)]
arm: dts: j7200: dts sync with Linux 6.6-rc1
Sync j7200 dts with Linux 6.6-rc1
- k3-j7200-r5-common-proc-board.dts now inherits from
k3-j7200-common-proc-board.dts instead of k3-j7200-som-p0.dtsi. This
allows us to trim down the r5 file considerably by using existing
properties
- remove pimux nodes from r5 file
- remove duplicate nodes & node properties from r5/u-boot files
- mcu_timer0 now used instead of timer1
mcu_timer0 device id added to dev-data.c file in order to work
- remove cpsw node
This node is no longer required since the compatible is now fixed
- remove dummy_clock_19_2_mhz
This node wasn't being used anyhere, so it was removed
- remove dummy_clock_200mhz
main_sdhci0 & main_sdhci1 no longer need dummy clock for eMMC/SD
- fix secure proxy node
mcu_secproxy changed to used secure_prxy_mcu which is already
defined in k3-j7200-mcu-wakeup.dtsi
- removed &mcu_ringacc property override since they're present in
v6.6-rc1
Roger Quadros [Thu, 5 Oct 2023 13:06:42 +0000 (16:06 +0300)]
board: ti: am64x: Switch to standard boot flow
Switch to using bootstd. Note with this change, we will stop using
distro_bootcmd and instead depend entirely on bootflow method of
starting the system up.
Drop header files that are no longer needed in am64x_evm.h.
k3_dfu.h is available via k3_dfu.env in am64x.env.
Drop unused macro CFG_SYS_SDRAM_BASE1.
Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Nishanth Menon <nm@ti.com>
To quote the author:
So far expo only supports menus. These are quite flexible for various
kinds of settings, but cannot deal with free-form input, such as a
serial number or a machine name.
This series adds support for a textline object, which is a single line
of text. It has a maximum length and its value is stored within the expo
structure.
U-Boot already has a command-line editor which provides most of the
features needed by expo. But the code runs in its own loop and only
returns when the line is finished. This is not suitable for expo, which
must handle a keypress at a time, returning to its caller after each
one.
In order to use the CLI code, some significant refactoring is included
here. This mostly involves moving the internal loop of the CLI to a
separate function and recording its state in a struct, just as was done
for single keypresses some time back. A minor addition is support for
Ctrl-W to delete a word, since strangely this is currently only present
in the simple version.
The video-console system provides most of the features needed by
testline, but a few things are missing. This series provides:
- primitive cursor support so the user can see where he is typing
- saving and restoring of the text-entry context, so that expo can allow
the user to continue where he left off, including deleting previously
entered characters correctly (for Truetype)
- obtaining the nominal width of a string of n characters, so that a
suitable width can be chosen for the textline object
Note that no support is provided for clearing the cursor. This was
addressed in a previous series[1] which could perhaps be rebased. For
this implementation, the cursor is therefore not enabled for the normal
command line, only for expo.
Reading and writing textline objects is supported for FDT and
environment, but not for CMOS RAM, since it would likely use too much
RAM to store a string.
In terms of code size, the overall size increase is 180 bytes for
Thumb02 boards, 160 of whcih is the addition of Ctrl-W to delete a word.
Simon Glass [Mon, 2 Oct 2023 01:13:34 +0000 (19:13 -0600)]
expo: Plumb in textlines to a scene
Provide an implementation for textlines in the scene code, so that they
are displayed correctly. Provide a way to have a border around the
textline, with the internal part being the same colour as the
background. This looks more natural.
Simon Glass [Mon, 2 Oct 2023 01:13:31 +0000 (19:13 -0600)]
expo: Add some scene fields needed for text entry
Add the CLI state, a buffer to hold the old value of the text being
edited and a place to save vidconsole entry context. These will be use
by the textline object.
Set an upper limit on the maximum number of characters in a textline
object supported by expo, at least for now.
Simon Glass [Mon, 2 Oct 2023 01:13:30 +0000 (19:13 -0600)]
expo: Allow rendering the background of any object
So far only menus have a background. When other object types are
rendered, they may have a background too. Make this code more generic
so it will be usable by new object types.
Simon Glass [Mon, 2 Oct 2023 01:13:27 +0000 (19:13 -0600)]
expo: Allow highlighting other scene-object types
So far only menus can be highlighted. With the coming addition of
text lines we need to be able to highlight other objects. Add a function
to determine whether an object can be highlighted.
Simon Glass [Mon, 2 Oct 2023 01:13:24 +0000 (19:13 -0600)]
expo: Use switch statements more for object types
In a lot of cases menus are the only objects which are have their own
behaviour in the cedit, e.g. to move between menus. With expo expanding
to support text, this is no-longer true.
Use a switch() statement so that we can simply insert a new 'case' for
the new object types.
Simon Glass [Mon, 2 Oct 2023 01:13:22 +0000 (19:13 -0600)]
expo: Add better error reporting
When building an expo fails, show some information about which node
caused the problem. Use -ENOENT consistently when the ID is missing.
This makes it easier for the user to debug things.
Simon Glass [Mon, 2 Oct 2023 01:13:21 +0000 (19:13 -0600)]
video: Support showing a cursor
Add rudimentary support for displaying a cursor on a vidconsole. This
helps the user to see where text is being entered.
The implementation so far is very simple: the cursor is just a vertical
bar of fixed width and cannot be erased. To erase the cursor, the text
must be redrawn over it.
This is good enough for expo but will need enhancement to be useful for
the command-line console. For example, it could save and restore the
area behind the cursor.
For now, enable this only for expo, to reduce code size.
Simon Glass [Mon, 2 Oct 2023 01:13:19 +0000 (19:13 -0600)]
video: Allow saving and restoring text-entry state
Text entry operates within a context which includes quite a bit of
information. For example, with Truetype fonts, each character in the
text string has a position stored, so that it is possible to
backspace to that character. This information is built up as strings
are drawn on the display.
For the command line, there is just a single context. It is created
when command-line entry starts and it is destroyed (or at least not
needed anymore) when the user presses <enter> to enter the command.
By contrast, expo needs to be able to switch in and out of a text-entry
context, since it is also displaying other objects in the scene.
Add a way to save and restore the entry context for a vidconsole. This
is only needed for the truetype vidconsole, so add a method for that,
storing the information in an abuf struct.
Simon Glass [Mon, 2 Oct 2023 01:13:18 +0000 (19:13 -0600)]
video: Allow obtaining the nominal size of a string size
At present there is a method for measuring text, but if the actual text
string is not known, it cannot be used.
For text editor we want to set the size of the entry box to cover the
expected text size. Add the concept of a 'norminal' size with a method
to calculate that for the vidconsole.
If the method is not implemented, fall back to using the font size,
which is sufficient for fixed-width fonts.
Simon Glass [Mon, 2 Oct 2023 01:13:14 +0000 (19:13 -0600)]
cli: Terminate the string in cread_line_process_ch()
Rather than relying on the caller, terminate the string inside this
function. Do this each time we return, whether input is finished or
not. It is not needed when the input is aborted, since the string will
be discarded in that case.
Simon Glass [Mon, 2 Oct 2023 01:13:11 +0000 (19:13 -0600)]
cli: Convert cread_line() to use a struct for the main vars
We want to reuse the editing code elsewhere. As a first step, move the
common variables into a struct. This will allow us to eventually put the
contents of the inner loop in a function, so it can be called from
elsewhere.
To quote the author:
I'm submitting a patch series that ports the gen_compile_commands.py
script from the Linux kernel's sources to U-Boot. This script,
originally located in scripts/clang-tools/gen_compile_commands.py,
enables the generation of compile_commands.json file for improved code
navigation and analysis. The series consists of the initial script
import, the necessary modifications for U-Boot compatibility, and
finally some documentation.
For now, this chapter is mostly a reference to the documentation of
gen_compile_commands, in doc/build, but it can be futurely used as
a guide for other IDE-friendly features.
Signed-off-by: Joao Marcos Costa <jmcosta944@gmail.com> Tested-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Add acknowledgments for porting and modifying the script. Of course, the
license, author, and copyright notice remain the same as in the original
script.
Signed-off-by: Joao Marcos Costa <jmcosta944@gmail.com> Tested-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
scripts: Port Linux's gen_compile_commands.py to U-Boot
This script generates a database of compiler flags, namely
compile_commands.json. It is quite useful for text editors that use
clangd LSP (e.g. Vim, Neovim).
- Assorted TI K3 updates, use ".dtso" for device tree overlays to match
general usage, mkimage fixes/improvements, assorted platform
updates/fixes, other assorted driver/platform fixes.
Andrew Davis [Thu, 3 Aug 2023 14:54:41 +0000 (09:54 -0500)]
configs: Make TI_SECURE_DEVICE default for K3
All K3 boards now are secure by default, instead of setting this in each
defconfig, make it implied by the ARCH config.
The only exception is IOT2050, which I do not believe will have any
problems with being a TI_SECURE_DEVICE, but for now turn it off to keep
its config the same.
Signed-off-by: Andrew Davis <afd@ti.com> Tested-by: Tom Rini <trini@konsulko.com>
Andre Przywara [Sun, 1 Oct 2023 22:52:12 +0000 (23:52 +0100)]
ARM: psci: move GIC address override to Kconfig
As the code to switch an ARM core from secure to the non-secure state
needs to know the base address of the Generic Interrupt Controller
(GIC), we read an Arm Cortex defined system register that is supposed to
hold that base address. However there are SoCs out there that get this
wrong, and this CBAR register either reads as 0 or points to the wrong
address. To accommodate those systems, so far we use a macro defined in
some platform specific header files, for affected boards.
To simplify future extensions, replace that macro with a Kconfig variable
that holds this override address, and define a default value for SoCs
that need it.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Sam Edwards <CFSworks@gmail.com>
Sean Anderson [Sat, 30 Sep 2023 20:45:46 +0000 (16:45 -0400)]
misc: fs_loader: Fix alignment of fs_loader driver
DM_DRIVER_GET will redeclare the fs_loader driver without the correct
alignment. This causes GCC to use the default section alignment of 32
bytes. This in turn creates a gap in the linker list due to the padding
required to achieve the correct alignment, corrupting all further entries.
Use DM_DRIVER_REF instead, which doesn't redeclare anything.
Fixes: 0998a20cfc6 ("misc: fs_loader: Add function to get the chosen loader") Signed-off-by: Sean Anderson <seanga2@gmail.com>
The man page correctly said that -B was ignored without -E, while the
`mkimage -h` output suggested otherwise. Now that -B can actually be
used by itself, update the man page.
While at it, also amend the `mkimage -h` line to mention the
connection with -E.
The FDT header is a fixed 40 bytes, so its size cannot (and is not)
modified, while its alignment is a property of the address in RAM one
loads the FIT to, so not something mkimage can affect in any way. (In
the file itself, the header is of course at offset 0, which has all
possible alignments already.)
Reported-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org>
Distinguish more clearly between source files meant for producing .dtb
from those meant for producing .dtbo. No functional change, as we
currently have rules for producing a foo.dtbo from either foo.dts or
foo.dtso.
Note that in the linux tree, all device tree overlay sources have been
renamed to .dtso, and the .dts->.dtbo rule is gone since v6.5 (commit 81d362732bac). So this is also a step towards staying closer to linux
with respect to both Kbuild and device tree sources.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org>
Distinguish more clearly between source files meant for producing .dtb
from those meant for producing .dtbo. No functional change, as we
currently have rules for producing a foo.dtbo from either foo.dts or
foo.dtso.
Note that in the linux tree, all device tree overlay sources have been
renamed to .dtso, and the .dts->.dtbo rule is gone since v6.5 (commit 81d362732bac). So this is also a step towards staying closer to linux
with respect to both Kbuild and device tree sources.
Distinguish more clearly between source files meant for producing .dtb
from those meant for producing .dtbo. No functional change, as we
currently have rules for producing a foo.dtbo from either foo.dts or
foo.dtso.
Note that in the linux tree, all device tree overlay sources have been
renamed to .dtso, and the .dts->.dtbo rule is gone since v6.5 (commit 81d362732bac). So this is also a step towards staying closer to linux
with respect to both Kbuild and device tree sources.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
arm: dts: imx8mm-cl-iot-gate: rename overlay sources to .dtso
Distinguish more clearly between source files meant for producing .dtb
from those meant for producing .dtbo. No functional change, as we
currently have rules for producing a foo.dtbo from either foo.dts or
foo.dtso.
Note that in the linux tree, all device tree overlay sources have been
renamed to .dtso, and the .dts->.dtbo rule is gone since v6.5 (commit 81d362732bac). So this is also a step towards staying closer to linux
with respect to both Kbuild and device tree sources.
Janne Grunau [Wed, 6 Sep 2023 21:50:34 +0000 (23:50 +0200)]
arm: apple: Add initial Apple M2 Ultra support
Apple's M2 Ultra SoC are somewhat similar to the M1 Ultra but needs
a tweaked memory map as the M2 Pro/Max SoCs. USB, NVMe, UART, WDT
and PCIe are working with the existing drivers.
Signed-off-by: Janne Grunau <j@jannau.net> Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Marek Vasut [Tue, 5 Sep 2023 13:48:08 +0000 (15:48 +0200)]
event: Rename rest of EVENT_SPY to EVENT_SPY_FULL or EVENT_SPY*
Fix up remaining occurances of EVENT_SPY with no suffix.
Fixes: 6c4cad7438 ("event: Rename EVENT_SPY to EVENT_SPY_FULL") Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Paul Barker [Fri, 1 Sep 2023 14:28:59 +0000 (15:28 +0100)]
env: Improve ENV_OFFSET help message
When reading Kconfig help messages to understand ENV_OFFSET and
ENV_OFFSET_REDUND, developers may not realise that they need to also
look at the chosen ENV_IS_IN_* options to see how the offsets will be
interpreted.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Andre Przywara [Wed, 30 Aug 2023 11:32:30 +0000 (12:32 +0100)]
driver: rng: Add DM_RNG interface for ARMv8.5 RNDR registers
The ARMv8.5 architecture extension defines architectural RNDR/RNDRRS
system registers, that provide 64 bits worth of randomness on every
read. Since it's an extension, and implementing it is optional, there is
a field in the ID_AA64ISAR0_EL1 ID register to query the availability
of those registers.
Add a UCLASS_RNG driver that returns entropy via repeated reads from
those system registers, if the extension is implemented.
The driver always binds, but checks the availability in the probe()
routine.
This helps systems which suffer from low boot entropy, since U-Boot can
provide entropy via the generic UEFI entropy gathering protocol to the OS,
at an early stage.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Roman Azarenko [Fri, 25 Aug 2023 08:10:14 +0000 (10:10 +0200)]
tools: ensure zeroed padding in external FIT images
Padding the header of an external FIT image is achieved by truncating
the existing temporary FIT file to match the required alignment before
appending image data. Reusing an existing file this way means that the
padding will likely contain a portion of the original data not
overwritten by the new header.
Zero out any data past the end of the new header, and stop at either
the end of the desired padding, or the end of the old FIT file,
whichever comes first.
Fixes: 7946a814a319 ("Revert "mkimage: fit: Do not tail-pad fitImage with external data"") Signed-off-by: Roman Azarenko <roman.azarenko@iopsys.eu> Reviewed-by: Simon Glass <sjg@chromium.org>
Sean Anderson [Sun, 8 Oct 2023 02:01:56 +0000 (22:01 -0400)]
malloc: Enable assertions if UNIT_TEST is enabled
dlmalloc has some sanity checks it performs on free() which can help detect
memory corruption. However, they are only enabled if DEBUG is defined before
including common.h. Define DEBUG earlier if UNIT_TEST is enabled so that
assertions are enabled in sandbox.
Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Nishanth Menon [Thu, 5 Oct 2023 18:15:14 +0000 (13:15 -0500)]
arm: dts: k3-j721e-sk/common-proc-board: Fix boot
Since commit 9e644284ab81 ("dm: core: Report bootph-pre-ram/sram node
as pre-reloc after relocation") A53 u-boot proper is broken. This is
because nodes marked as 'bootph-pre-ram' are not available at u-boot
proper before relocation.
To fix this we mark all nodes in u-boot.dtsi as 'bootph-all'.
Fixes: 69b19ca67bcb ("arm: dts: k3-j721e: Sync with v6.6-rc1") Cc: Neha Francis <n-francis@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Tested-by: Tom Rini <trini@konsulko.com> # J721E-EVM GP Tested-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org>
Jan Kiszka [Thu, 5 Oct 2023 04:37:17 +0000 (06:37 +0200)]
arm: dts: k3-am65-iot2050: Fix boot
Since commit 9e644284ab812 ("dm: core: Report bootph-pre-ram/sram node
as pre-reloc after relocation") A53 u-boot proper is broken. This is
because nodes marked as 'bootph-pre-ram' are not available at u-boot
proper before relocation.
To fix this we mark all nodes in u-boot.dtsi as 'bootph-all'.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Nishanth Menon <nm@ti.com>
Nicolò Veronese [Tue, 3 Oct 2023 22:14:26 +0000 (00:14 +0200)]
spi: mtk_spim: prevent global pll clock override
With commit 793e62301180 ("spi: mtk_spim: get spi clk rate only once") a
new system to calculate the SPI clocks has been added.
Unfortunately, the do_div macro overrides the global priv->pll_clk_rate
field. This will cause to have a reduced clock rate on each subsequent
SPI call.
where sometimes the "fixdep: not found" is instead "fixdep: Permission
denied" and the Error 127 becomes 126.
This smells like a race condition, and indeed it is: Currently,
u-boot-initial-env is a prerequisite of the envtools target, which
also lists scripts_basic as a prerequisite:
However, the u-boot-initial-env rule involves building the
printinitialenv helper, which in turn is built using an if_changed_dep
rule. That means we must ensure scripts/basic/fixdep is built and
ready before trying to build printinitialenv, i.e. the
u-boot-initial-env rule itself must depend on the phony scripts_basic
target.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org>
Added new xenguest_arm64_virtio_defconfig which
enables support for virtio-blk using various types
of transport like virtio-pci, vrtio-mmio. Currently
supported: up to 2 PCI host bridges and 10 MMIO devices.
Note: DT parsing code was partly taken from pci-uclass.c
Limitation: All memory regions should be
below 4GB address space.
Masahisa Kojima [Tue, 3 Oct 2023 02:29:57 +0000 (11:29 +0900)]
board: synquacer: set actual gd->ram_top and gd->ram_size
Current gd->ram_size and gd->ram_top reflect only the
first DRAM bank even if the SynQuacer Developerbox could
have up to three DRAM banks.
With the commit 06d514d77c37 ("lmb: consider EFI memory map"),
the first DRAM bank indicates <4GB address, so whole >4GB memory
is marked as EFI_BOOT_SERVICES_DATA and it results that
U-Boot can not access >4GB memory.
Since 64-bits DRAM address is fully available on the SynQuacer
Developerbox, let's set the installed DIMM information to
gd->ram_top and gd->ram_size.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Before using the result of env_get("stdin") we must check if it is NULL.
Avoid #if. This resolves the -Wunused-but-set-variable issue and we don't
need a dummy assignment in the else branch. Anyway this warning is
disabled in the Makefile.
For sake of readability use an early return after the configuration check.
Checking CONFIG_SPL_BUILD is incorrect as env_get() is only defined if
CONFIG_$(SPL_TPL)ENV_SUPPORT=y.
Fixes: 985ca3945fa3 ("spl: input: Allow input in SPL and TPL") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
Lars Feyaerts [Mon, 2 Oct 2023 08:00:14 +0000 (10:00 +0200)]
mkimage: allow internalization of data-position
Make it possible for data that was externalized using a static external
position (-p) to be internalized. Enables the ability to convert
existing FIT images built with -p to be converted to a FIT image where the
data is internal, to be converted to a FIT image where the data is
external relative to the end of the FIT (-E) or change the initial
static external position to a different static external position (-p).
Removing the original external-data-related properties ensures that
they're not present after conversion. Without this, they would still be
present in the resulting FIT even if the FIT has been, for example,
internalized.
Signed-off-by: Lars Feyaerts <lars@bitbiz.be> Reviewed-by: Simon Glass <sjg@chromium.org>
To quote the author:
At present on Sandbox when binding to a host backing file, the host
block device is created with a hard-coded 512 bytes block size.
Such assumption works for most cases, but for situation that with a raw
image file dump from a pre-formatted GPT partitioned disk image from a
4KiB block size device, when binding this file to a host device and mapping
this device to a blkmap, "blkmap" command like "blkmap part" won't work
correctly, due to block size mismatch during parsing the partition table.
This series updates Sandbox block driver, as well as the blkmap driver,
to get rid of the hard-coded 512 bytes block size assumption.
This series is available at u-boot-x86/blk for testing.
Test log (512 block size):
=> host bind 0 test.img
=> host info
dev blocks blksz label path
0 262144 512 0 test.img
=> blkmap create 0
Created "0"
=> blkmap map 0 0 40000 linear host 0 0
Block 0x0+0x40000 mapped to block 0x0 of "host 0"
=> blkmap info
Device 0: Vendor: U-Boot Rev: 1.0 Prod: blkmap
Type: Hard Disk
Capacity: 128.0 MB = 0.1 GB (262144 x 512)
=> blkmap part
Partition Map for BLKMAP device 0 -- Partition Type: EFI
Bin Meng [Tue, 26 Sep 2023 08:43:42 +0000 (16:43 +0800)]
cmd: blk_common: Stop using hard-coded block size for Sandbox operations
commit 3d2fc7971454 ("cmd: blk: Allow generic read/write operations to work in sandbox")
used the hard-coded block size (512) for accessing the sandbox host
device. Now that we have added support for non-512 block size for both
Sandbox host device and blkmap driver, let's stop using the hard-coded
block size.
Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Tue, 26 Sep 2023 08:43:39 +0000 (16:43 +0800)]
blk: blkmap: Support mapping to device of any block size
At present if a device to map has a block size other than 512,
the blkmap map process just fails. There is no reason why we
can't just use the block size of the mapped device.
Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Simon Glass <sjg@chromium.org>
projects / u-boot.git / log