From: Michael Walle Date: Mon, 13 May 2024 20:56:08 +0000 (+0200) Subject: clk: sunxi: add EMAC and EPHY clocks and resets for the V3s SoC X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=f06757324b2f2b0e062113a51f517a5361e6603c;p=u-boot.git clk: sunxi: add EMAC and EPHY clocks and resets for the V3s SoC Add the clock gate registers as well as the reset register bits for the EMAC and EPHY for the V3s. These are needed by the sun8i network driver. Signed-off-by: Michael Walle Reviewed-by: Andre Przywara --- diff --git a/drivers/clk/sunxi/clk_v3s.c b/drivers/clk/sunxi/clk_v3s.c index 85410e282e..292c8c44f9 100644 --- a/drivers/clk/sunxi/clk_v3s.c +++ b/drivers/clk/sunxi/clk_v3s.c @@ -16,6 +16,7 @@ static struct ccu_clk_gate v3s_gates[] = { [CLK_BUS_MMC0] = GATE(0x060, BIT(8)), [CLK_BUS_MMC1] = GATE(0x060, BIT(9)), [CLK_BUS_MMC2] = GATE(0x060, BIT(10)), + [CLK_BUS_EMAC] = GATE(0x060, BIT(17)), [CLK_BUS_SPI0] = GATE(0x060, BIT(20)), [CLK_BUS_OTG] = GATE(0x060, BIT(24)), @@ -30,6 +31,8 @@ static struct ccu_clk_gate v3s_gates[] = { [CLK_BUS_UART1] = GATE(0x06c, BIT(17)), [CLK_BUS_UART2] = GATE(0x06c, BIT(18)), + [CLK_BUS_EPHY] = GATE(0x070, BIT(0)), + [CLK_SPI0] = GATE(0x0a0, BIT(31)), [CLK_USB_PHY0] = GATE(0x0cc, BIT(8)), @@ -44,12 +47,15 @@ static struct ccu_reset v3s_resets[] = { [RST_BUS_MMC0] = RESET(0x2c0, BIT(8)), [RST_BUS_MMC1] = RESET(0x2c0, BIT(9)), [RST_BUS_MMC2] = RESET(0x2c0, BIT(10)), + [RST_BUS_EMAC] = RESET(0x2c0, BIT(17)), [RST_BUS_SPI0] = RESET(0x2c0, BIT(20)), [RST_BUS_OTG] = RESET(0x2c0, BIT(24)), [RST_BUS_TCON0] = RESET(0x2c4, BIT(4)), [RST_BUS_DE] = RESET(0x2c4, BIT(12)), + [RST_BUS_EPHY] = RESET(0x2c8, BIT(2)), + [RST_BUS_I2C0] = RESET(0x2d8, BIT(0)), [RST_BUS_I2C1] = RESET(0x2d8, BIT(1)), [RST_BUS_UART0] = RESET(0x2d8, BIT(16)),