From: Sumit Garg Date: Thu, 4 Aug 2022 14:27:17 +0000 (+0530) Subject: pmic: Convert pm8916 driver to a generic Qcom PMIC driver X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=e555d4caacd008b5091a8d755bdfff1ce8cceb2f;p=u-boot.git pmic: Convert pm8916 driver to a generic Qcom PMIC driver Since both pm8916.c and pm8916_gpio.c are already supporting multiple Qcom SoCs, it makes sense to rename these drivers to pmic_qcom.c and qcom_pmic_gpio.c respectively. Also, these driver can be extended to support additional functionality if required for other Qcom SoCs. Along with this import latest DT binding: qcom,spmi-pmic.txt from Linux kernel and thereby remove pm8916.txt. Signed-off-by: Sumit Garg --- diff --git a/configs/dragonboard410c_defconfig b/configs/dragonboard410c_defconfig index 4de32099ed..e5e70a2ada 100644 --- a/configs/dragonboard410c_defconfig +++ b/configs/dragonboard410c_defconfig @@ -43,7 +43,7 @@ CONFIG_FASTBOOT_BUF_ADDR=0x91000000 CONFIG_FASTBOOT_FLASH=y CONFIG_FASTBOOT_FLASH_MMC_DEV=0 CONFIG_MSM_GPIO=y -CONFIG_PM8916_GPIO=y +CONFIG_QCOM_PMIC_GPIO=y CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_MMC_SDHCI=y @@ -52,7 +52,7 @@ CONFIG_PHY=y CONFIG_PINCTRL=y CONFIG_PINCONF=y CONFIG_DM_PMIC=y -CONFIG_PMIC_PM8916=y +CONFIG_PMIC_QCOM=y CONFIG_MSM_SERIAL=y CONFIG_SPMI_MSM=y CONFIG_USB=y diff --git a/configs/dragonboard820c_defconfig b/configs/dragonboard820c_defconfig index 855f628213..e2e2e627ae 100644 --- a/configs/dragonboard820c_defconfig +++ b/configs/dragonboard820c_defconfig @@ -36,12 +36,12 @@ CONFIG_ENV_EXT4_INTERFACE="mmc" CONFIG_ENV_EXT4_DEVICE_AND_PART="0:1" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_CLK=y -CONFIG_PM8916_GPIO=y +CONFIG_QCOM_PMIC_GPIO=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_MSM=y CONFIG_PINCTRL=y CONFIG_PINCONF=y CONFIG_DM_PMIC=y -CONFIG_PMIC_PM8916=y +CONFIG_PMIC_QCOM=y CONFIG_MSM_SERIAL=y CONFIG_SPMI_MSM=y diff --git a/configs/dragonboard845c_defconfig b/configs/dragonboard845c_defconfig index cf1a1d25cf..a69d82761a 100644 --- a/configs/dragonboard845c_defconfig +++ b/configs/dragonboard845c_defconfig @@ -20,10 +20,10 @@ CONFIG_CMD_GPIO=y # CONFIG_NET is not set CONFIG_CLK=y CONFIG_MSM_GPIO=y -CONFIG_PM8916_GPIO=y +CONFIG_QCOM_PMIC_GPIO=y CONFIG_PINCTRL=y CONFIG_DM_PMIC=y -CONFIG_PMIC_PM8916=y +CONFIG_PMIC_QCOM=y CONFIG_MSM_GENI_SERIAL=y CONFIG_SPMI_MSM=y CONFIG_LMB_MAX_REGIONS=64 diff --git a/configs/sandbox64_defconfig b/configs/sandbox64_defconfig index 290d1506c2..4599db73ed 100644 --- a/configs/sandbox64_defconfig +++ b/configs/sandbox64_defconfig @@ -127,7 +127,7 @@ CONFIG_FASTBOOT_FLASH=y CONFIG_FASTBOOT_FLASH_MMC_DEV=0 CONFIG_GPIO_HOG=y CONFIG_DM_GPIO_LOOKUP_LABEL=y -CONFIG_PM8916_GPIO=y +CONFIG_QCOM_PMIC_GPIO=y CONFIG_SANDBOX_GPIO=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_I2C_CROS_EC_LDO=y @@ -178,7 +178,7 @@ CONFIG_DM_PMIC=y CONFIG_PMIC_ACT8846=y CONFIG_DM_PMIC_PFUZE100=y CONFIG_DM_PMIC_MAX77686=y -CONFIG_PMIC_PM8916=y +CONFIG_PMIC_QCOM=y CONFIG_PMIC_RK8XX=y CONFIG_PMIC_S2MPS11=y CONFIG_DM_PMIC_SANDBOX=y diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index ab5d3f19bf..4a0c51c7f5 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -171,7 +171,7 @@ CONFIG_FASTBOOT_FLASH=y CONFIG_FASTBOOT_FLASH_MMC_DEV=0 CONFIG_GPIO_HOG=y CONFIG_DM_GPIO_LOOKUP_LABEL=y -CONFIG_PM8916_GPIO=y +CONFIG_QCOM_PMIC_GPIO=y CONFIG_SANDBOX_GPIO=y CONFIG_DM_HWSPINLOCK=y CONFIG_HWSPINLOCK_SANDBOX=y @@ -231,7 +231,7 @@ CONFIG_PMIC_ACT8846=y CONFIG_DM_PMIC_PFUZE100=y CONFIG_DM_PMIC_MAX77686=y CONFIG_DM_PMIC_MC34708=y -CONFIG_PMIC_PM8916=y +CONFIG_PMIC_QCOM=y CONFIG_PMIC_RK8XX=y CONFIG_PMIC_S2MPS11=y CONFIG_DM_PMIC_SANDBOX=y diff --git a/configs/sandbox_flattree_defconfig b/configs/sandbox_flattree_defconfig index a8b439faa9..4b18c240ee 100644 --- a/configs/sandbox_flattree_defconfig +++ b/configs/sandbox_flattree_defconfig @@ -100,7 +100,7 @@ CONFIG_DM_DEMO_SHAPE=y CONFIG_DFU_SF=y CONFIG_GPIO_HOG=y CONFIG_DM_GPIO_LOOKUP_LABEL=y -CONFIG_PM8916_GPIO=y +CONFIG_QCOM_PMIC_GPIO=y CONFIG_SANDBOX_GPIO=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_I2C_CROS_EC_LDO=y @@ -153,7 +153,7 @@ CONFIG_PMIC_ACT8846=y CONFIG_DM_PMIC_PFUZE100=y CONFIG_DM_PMIC_MAX77686=y CONFIG_DM_PMIC_MC34708=y -CONFIG_PMIC_PM8916=y +CONFIG_PMIC_QCOM=y CONFIG_PMIC_S2MPS11=y CONFIG_DM_PMIC_SANDBOX=y CONFIG_PMIC_S5M8767=y diff --git a/configs/sandbox_noinst_defconfig b/configs/sandbox_noinst_defconfig index 3d34d81731..72c908f61a 100644 --- a/configs/sandbox_noinst_defconfig +++ b/configs/sandbox_noinst_defconfig @@ -126,7 +126,7 @@ CONFIG_DM_DEMO_SIMPLE=y CONFIG_DM_DEMO_SHAPE=y CONFIG_SPL_FIRMWARE=y CONFIG_GPIO_HOG=y -CONFIG_PM8916_GPIO=y +CONFIG_QCOM_PMIC_GPIO=y CONFIG_SANDBOX_GPIO=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_I2C_CROS_EC_LDO=y @@ -176,7 +176,7 @@ CONFIG_PMIC_ACT8846=y CONFIG_DM_PMIC_PFUZE100=y CONFIG_DM_PMIC_MAX77686=y CONFIG_DM_PMIC_MC34708=y -CONFIG_PMIC_PM8916=y +CONFIG_PMIC_QCOM=y CONFIG_PMIC_RK8XX=y CONFIG_PMIC_S2MPS11=y CONFIG_DM_PMIC_SANDBOX=y diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig index 76e8acd126..11b9aa890b 100644 --- a/configs/sandbox_spl_defconfig +++ b/configs/sandbox_spl_defconfig @@ -127,7 +127,7 @@ CONFIG_DM_DEMO_SIMPLE=y CONFIG_DM_DEMO_SHAPE=y CONFIG_SPL_FIRMWARE=y CONFIG_GPIO_HOG=y -CONFIG_PM8916_GPIO=y +CONFIG_QCOM_PMIC_GPIO=y CONFIG_SANDBOX_GPIO=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_I2C_CROS_EC_LDO=y @@ -179,7 +179,7 @@ CONFIG_PMIC_ACT8846=y CONFIG_DM_PMIC_PFUZE100=y CONFIG_DM_PMIC_MAX77686=y CONFIG_DM_PMIC_MC34708=y -CONFIG_PMIC_PM8916=y +CONFIG_PMIC_QCOM=y CONFIG_PMIC_RK8XX=y CONFIG_PMIC_S2MPS11=y CONFIG_DM_PMIC_SANDBOX=y diff --git a/configs/sandbox_vpl_defconfig b/configs/sandbox_vpl_defconfig index 96c9622707..c3856a8374 100644 --- a/configs/sandbox_vpl_defconfig +++ b/configs/sandbox_vpl_defconfig @@ -136,7 +136,7 @@ CONFIG_DM_DEMO_SIMPLE=y CONFIG_DM_DEMO_SHAPE=y CONFIG_SPL_FIRMWARE=y CONFIG_GPIO_HOG=y -CONFIG_PM8916_GPIO=y +CONFIG_QCOM_PMIC_GPIO=y CONFIG_SANDBOX_GPIO=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_I2C_CROS_EC_LDO=y @@ -184,7 +184,7 @@ CONFIG_PMIC_ACT8846=y CONFIG_DM_PMIC_PFUZE100=y CONFIG_DM_PMIC_MAX77686=y CONFIG_DM_PMIC_MC34708=y -CONFIG_PMIC_PM8916=y +CONFIG_PMIC_QCOM=y CONFIG_PMIC_RK8XX=y CONFIG_PMIC_S2MPS11=y CONFIG_DM_PMIC_SANDBOX=y diff --git a/configs/starqltechn_defconfig b/configs/starqltechn_defconfig index 2d07767b61..4f84f5f974 100644 --- a/configs/starqltechn_defconfig +++ b/configs/starqltechn_defconfig @@ -23,10 +23,10 @@ CONFIG_CMD_BMP=y # CONFIG_DM_STDIO is not set CONFIG_CLK=y CONFIG_MSM_GPIO=y -CONFIG_PM8916_GPIO=y +CONFIG_QCOM_PMIC_GPIO=y CONFIG_PINCTRL=y CONFIG_DM_PMIC=y -CONFIG_PMIC_PM8916=y +CONFIG_PMIC_QCOM=y # CONFIG_REQUIRE_SERIAL_CONSOLE is not set CONFIG_SPMI_MSM=y CONFIG_DM_VIDEO=y diff --git a/doc/device-tree-bindings/pmic/pm8916.txt b/doc/device-tree-bindings/pmic/pm8916.txt deleted file mode 100644 index 15c598b8c4..0000000000 --- a/doc/device-tree-bindings/pmic/pm8916.txt +++ /dev/null @@ -1,18 +0,0 @@ -Qualcomm pm8916 PMIC - -This PMIC is connected using SPMI bus so should be child of SPMI bus controller. - -Required properties: -- compatible: "qcom,spmi-pmic"; -- reg: SPMI Slave ID, size (ignored) -- #address-cells: 0x1 (peripheral ID) -- #size-cells: 0x1 (size of peripheral register space) - -Example: - -pm8916@0 { - compatible = "qcom,spmi-pmic"; - reg = <0x0 0x1>; - #address-cells = <0x1>; - #size-cells = <0x1>; -}; diff --git a/doc/device-tree-bindings/pmic/qcom,spmi-pmic.txt b/doc/device-tree-bindings/pmic/qcom,spmi-pmic.txt new file mode 100644 index 0000000000..eb78e3ae77 --- /dev/null +++ b/doc/device-tree-bindings/pmic/qcom,spmi-pmic.txt @@ -0,0 +1,94 @@ + Qualcomm SPMI PMICs multi-function device bindings + +The Qualcomm SPMI series presently includes PM8941, PM8841 and PMA8084 +PMICs. These PMICs use a QPNP scheme through SPMI interface. +QPNP is effectively a partitioning scheme for dividing the SPMI extended +register space up into logical pieces, and set of fixed register +locations/definitions within these regions, with some of these regions +specifically used for interrupt handling. + +The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are +interfaced to the chip via the SPMI (System Power Management Interface) bus. +Support for multiple independent functions are implemented by splitting the +16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes +each. A function can consume one or more of these fixed-size register regions. + +Required properties: +- compatible: Should contain one of: + "qcom,pm660", + "qcom,pm660l", + "qcom,pm7325", + "qcom,pm8004", + "qcom,pm8005", + "qcom,pm8019", + "qcom,pm8028", + "qcom,pm8110", + "qcom,pm8150", + "qcom,pm8150b", + "qcom,pm8150c", + "qcom,pm8150l", + "qcom,pm8226", + "qcom,pm8350c", + "qcom,pm8841", + "qcom,pm8901", + "qcom,pm8909", + "qcom,pm8916", + "qcom,pm8941", + "qcom,pm8950", + "qcom,pm8953", + "qcom,pm8994", + "qcom,pm8998", + "qcom,pma8084", + "qcom,pmd9635", + "qcom,pmi8950", + "qcom,pmi8962", + "qcom,pmi8994", + "qcom,pmi8998", + "qcom,pmk8002", + "qcom,pmk8350", + "qcom,pmr735a", + "qcom,smb2351", + or generalized "qcom,spmi-pmic". +- reg: Specifies the SPMI USID slave address for this device. + For more information see: + Documentation/devicetree/bindings/spmi/spmi.yaml + +Required properties for peripheral child nodes: +- compatible: Should contain "qcom,xxx", where "xxx" is a peripheral name. + +Optional properties for peripheral child nodes: +- interrupts: Interrupts are specified as a 4-tuple. For more information + see: + Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml +- interrupt-names: Corresponding interrupt name to the interrupts property + +Each child node of SPMI slave id represents a function of the PMIC. In the +example below the rtc device node represents a peripheral of pm8941 +SID = 0. The regulator device node represents a peripheral of pm8941 SID = 1. + +Example: + + spmi { + compatible = "qcom,spmi-pmic-arb"; + + pm8941@0 { + compatible = "qcom,pm8941", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + + rtc { + compatible = "qcom,rtc"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "alarm"; + }; + }; + + pm8941@1 { + compatible = "qcom,pm8941", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + + regulator { + compatible = "qcom,regulator"; + regulator-name = "8941_boost"; + }; + }; + }; diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 7e4c3577b3..c949f9d2f7 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -303,14 +303,14 @@ config CMD_PCA953X legacy GPIO interface. Several subcommands are provided which mirror the standard 'gpio' command. It should use that instead. -config PM8916_GPIO - bool "Qualcomm PM8916 PMIC GPIO/keypad driver" - depends on DM_GPIO && PMIC_PM8916 +config QCOM_PMIC_GPIO + bool "Qualcomm generic PMIC GPIO/keypad driver" + depends on DM_GPIO && PMIC_QCOM help Support for GPIO pins and power/reset buttons found on - Qualcomm PM8916 PMIC. + Qualcomm SoCs PMIC. Default name for GPIO bank is "pm8916". - Power and reset buttons are placed in "pm8916_key" bank and + Power and reset buttons are placed in "pwkey_qcom" bank and have gpio numbers 0 and 1 respectively. config PCF8575_GPIO diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 39762fa06c..9d718a554e 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -63,7 +63,7 @@ obj-$(CONFIG_OCTEON_GPIO) += octeon_gpio.o obj-$(CONFIG_MVEBU_GPIO) += mvebu_gpio.o obj-$(CONFIG_MSM_GPIO) += msm_gpio.o obj-$(CONFIG_$(SPL_)PCF8575_GPIO) += pcf8575_gpio.o -obj-$(CONFIG_$(SPL_TPL_)PM8916_GPIO) += pm8916_gpio.o +obj-$(CONFIG_$(SPL_TPL_)QCOM_PMIC_GPIO) += qcom_pmic_gpio.o obj-$(CONFIG_MT7620_GPIO) += mt7620_gpio.o obj-$(CONFIG_MT7621_GPIO) += mt7621_gpio.o obj-$(CONFIG_MSCC_SGPIO) += mscc_sgpio.o diff --git a/drivers/gpio/pm8916_gpio.c b/drivers/gpio/qcom_pmic_gpio.c similarity index 67% rename from drivers/gpio/pm8916_gpio.c rename to drivers/gpio/qcom_pmic_gpio.c index 7ad95784a8..e9232a007f 100644 --- a/drivers/gpio/pm8916_gpio.c +++ b/drivers/gpio/qcom_pmic_gpio.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Qualcomm pm8916 pmic gpio driver - part of Qualcomm PM8916 PMIC + * Qualcomm generic pmic gpio driver * * (C) Copyright 2015 Mateusz Kulikowski */ @@ -19,7 +19,7 @@ /* Register maps */ -/* Type and subtype are shared for all pm8916 peripherals */ +/* Type and subtype are shared for all PMIC peripherals */ #define REG_TYPE 0x4 #define REG_SUBTYPE 0x5 @@ -47,14 +47,14 @@ #define REG_EN_CTL 0x46 #define REG_EN_CTL_ENABLE (1 << 7) -struct pm8916_gpio_bank { +struct qcom_gpio_bank { uint32_t pid; /* Peripheral ID on SPMI bus */ }; -static int pm8916_gpio_set_direction(struct udevice *dev, unsigned offset, - bool input, int value) +static int qcom_gpio_set_direction(struct udevice *dev, unsigned offset, + bool input, int value) { - struct pm8916_gpio_bank *priv = dev_get_priv(dev); + struct qcom_gpio_bank *priv = dev_get_priv(dev); uint32_t gpio_base = priv->pid + REG_OFFSET(offset); int ret; @@ -101,20 +101,20 @@ static int pm8916_gpio_set_direction(struct udevice *dev, unsigned offset, REG_EN_CTL_ENABLE); } -static int pm8916_gpio_direction_input(struct udevice *dev, unsigned offset) +static int qcom_gpio_direction_input(struct udevice *dev, unsigned offset) { - return pm8916_gpio_set_direction(dev, offset, true, 0); + return qcom_gpio_set_direction(dev, offset, true, 0); } -static int pm8916_gpio_direction_output(struct udevice *dev, unsigned offset, - int value) +static int qcom_gpio_direction_output(struct udevice *dev, unsigned offset, + int value) { - return pm8916_gpio_set_direction(dev, offset, false, value); + return qcom_gpio_set_direction(dev, offset, false, value); } -static int pm8916_gpio_get_function(struct udevice *dev, unsigned offset) +static int qcom_gpio_get_function(struct udevice *dev, unsigned offset) { - struct pm8916_gpio_bank *priv = dev_get_priv(dev); + struct qcom_gpio_bank *priv = dev_get_priv(dev); uint32_t gpio_base = priv->pid + REG_OFFSET(offset); int reg; @@ -134,9 +134,9 @@ static int pm8916_gpio_get_function(struct udevice *dev, unsigned offset) } } -static int pm8916_gpio_get_value(struct udevice *dev, unsigned offset) +static int qcom_gpio_get_value(struct udevice *dev, unsigned offset) { - struct pm8916_gpio_bank *priv = dev_get_priv(dev); + struct qcom_gpio_bank *priv = dev_get_priv(dev); uint32_t gpio_base = priv->pid + REG_OFFSET(offset); int reg; @@ -147,10 +147,10 @@ static int pm8916_gpio_get_value(struct udevice *dev, unsigned offset) return !!(reg & REG_STATUS_VAL_MASK); } -static int pm8916_gpio_set_value(struct udevice *dev, unsigned offset, - int value) +static int qcom_gpio_set_value(struct udevice *dev, unsigned offset, + int value) { - struct pm8916_gpio_bank *priv = dev_get_priv(dev); + struct qcom_gpio_bank *priv = dev_get_priv(dev); uint32_t gpio_base = priv->pid + REG_OFFSET(offset); /* Set the output value of the gpio */ @@ -158,17 +158,17 @@ static int pm8916_gpio_set_value(struct udevice *dev, unsigned offset, REG_CTL_OUTPUT_MASK, !!value); } -static const struct dm_gpio_ops pm8916_gpio_ops = { - .direction_input = pm8916_gpio_direction_input, - .direction_output = pm8916_gpio_direction_output, - .get_value = pm8916_gpio_get_value, - .set_value = pm8916_gpio_set_value, - .get_function = pm8916_gpio_get_function, +static const struct dm_gpio_ops qcom_gpio_ops = { + .direction_input = qcom_gpio_direction_input, + .direction_output = qcom_gpio_direction_output, + .get_value = qcom_gpio_get_value, + .set_value = qcom_gpio_set_value, + .get_function = qcom_gpio_get_function, }; -static int pm8916_gpio_probe(struct udevice *dev) +static int qcom_gpio_probe(struct udevice *dev) { - struct pm8916_gpio_bank *priv = dev_get_priv(dev); + struct qcom_gpio_bank *priv = dev_get_priv(dev); int reg; priv->pid = dev_read_addr(dev); @@ -187,33 +187,33 @@ static int pm8916_gpio_probe(struct udevice *dev) return 0; } -static int pm8916_gpio_of_to_plat(struct udevice *dev) +static int qcom_gpio_of_to_plat(struct udevice *dev) { struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); uc_priv->gpio_count = dev_read_u32_default(dev, "gpio-count", 0); uc_priv->bank_name = dev_read_string(dev, "gpio-bank-name"); if (uc_priv->bank_name == NULL) - uc_priv->bank_name = "pm8916"; + uc_priv->bank_name = "qcom_pmic"; return 0; } -static const struct udevice_id pm8916_gpio_ids[] = { +static const struct udevice_id qcom_gpio_ids[] = { { .compatible = "qcom,pm8916-gpio" }, { .compatible = "qcom,pm8994-gpio" }, /* 22 GPIO's */ { .compatible = "qcom,pm8998-gpio" }, { } }; -U_BOOT_DRIVER(gpio_pm8916) = { - .name = "gpio_pm8916", +U_BOOT_DRIVER(qcom_pmic_gpio) = { + .name = "qcom_pmic_gpio", .id = UCLASS_GPIO, - .of_match = pm8916_gpio_ids, - .of_to_plat = pm8916_gpio_of_to_plat, - .probe = pm8916_gpio_probe, - .ops = &pm8916_gpio_ops, - .priv_auto = sizeof(struct pm8916_gpio_bank), + .of_match = qcom_gpio_ids, + .of_to_plat = qcom_gpio_of_to_plat, + .probe = qcom_gpio_probe, + .ops = &qcom_gpio_ops, + .priv_auto = sizeof(struct qcom_gpio_bank), }; @@ -222,14 +222,14 @@ U_BOOT_DRIVER(gpio_pm8916) = { #define KPDPWR_ON_INT_BIT 0 #define RESIN_ON_INT_BIT 1 -static int pm8941_pwrkey_get_function(struct udevice *dev, unsigned offset) +static int qcom_pwrkey_get_function(struct udevice *dev, unsigned offset) { return GPIOF_INPUT; } -static int pm8941_pwrkey_get_value(struct udevice *dev, unsigned offset) +static int qcom_pwrkey_get_value(struct udevice *dev, unsigned offset) { - struct pm8916_gpio_bank *priv = dev_get_priv(dev); + struct qcom_gpio_bank *priv = dev_get_priv(dev); int reg = pmic_reg_read(dev->parent, priv->pid + PON_INT_RT_STS); @@ -247,14 +247,14 @@ static int pm8941_pwrkey_get_value(struct udevice *dev, unsigned offset) } } -static const struct dm_gpio_ops pm8941_pwrkey_ops = { - .get_value = pm8941_pwrkey_get_value, - .get_function = pm8941_pwrkey_get_function, +static const struct dm_gpio_ops qcom_pwrkey_ops = { + .get_value = qcom_pwrkey_get_value, + .get_function = qcom_pwrkey_get_function, }; -static int pm8941_pwrkey_probe(struct udevice *dev) +static int qcom_pwrkey_probe(struct udevice *dev) { - struct pm8916_gpio_bank *priv = dev_get_priv(dev); + struct qcom_gpio_bank *priv = dev_get_priv(dev); int reg; priv->pid = dev_read_addr(dev); @@ -273,31 +273,31 @@ static int pm8941_pwrkey_probe(struct udevice *dev) return 0; } -static int pm8941_pwrkey_of_to_plat(struct udevice *dev) +static int qcom_pwrkey_of_to_plat(struct udevice *dev) { struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); uc_priv->gpio_count = 2; uc_priv->bank_name = dev_read_string(dev, "gpio-bank-name"); if (uc_priv->bank_name == NULL) - uc_priv->bank_name = "pm8916_key"; + uc_priv->bank_name = "pwkey_qcom"; return 0; } -static const struct udevice_id pm8941_pwrkey_ids[] = { +static const struct udevice_id qcom_pwrkey_ids[] = { { .compatible = "qcom,pm8916-pwrkey" }, { .compatible = "qcom,pm8994-pwrkey" }, { .compatible = "qcom,pm8998-pwrkey" }, { } }; -U_BOOT_DRIVER(pwrkey_pm89xx) = { - .name = "pwrkey_pm89xx", +U_BOOT_DRIVER(pwrkey_qcom) = { + .name = "pwrkey_qcom", .id = UCLASS_GPIO, - .of_match = pm8941_pwrkey_ids, - .of_to_plat = pm8941_pwrkey_of_to_plat, - .probe = pm8941_pwrkey_probe, - .ops = &pm8941_pwrkey_ops, - .priv_auto = sizeof(struct pm8916_gpio_bank), + .of_match = qcom_pwrkey_ids, + .of_to_plat = qcom_pwrkey_of_to_plat, + .probe = qcom_pwrkey_probe, + .ops = &qcom_pwrkey_ops, + .priv_auto = sizeof(struct qcom_gpio_bank), }; diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig index 66b16b06e0..0478f2aa1d 100644 --- a/drivers/power/pmic/Kconfig +++ b/drivers/power/pmic/Kconfig @@ -216,10 +216,10 @@ config PMIC_MAX8997 - MUIC - Others -config PMIC_PM8916 - bool "Enable Driver Model for Qualcomm PM8916 PMIC" +config PMIC_QCOM + bool "Enable Driver Model for Qualcomm generic PMIC" ---help--- - The PM8916 is a PMIC connected to one (or several) processors + The Qcom PMIC is connected to one (or several) processors with SPMI bus. It has 2 slaves with several peripherals: - 18x LDO - 4x GPIO @@ -229,7 +229,7 @@ config PMIC_PM8916 - Vibrator drivers - Others - Driver binding info: doc/device-tree-bindings/pmic/pm8916.txt + Driver binding info: doc/device-tree-bindings/pmic/qcom,spmi-pmic.txt config PMIC_RK8XX bool "Enable support for Rockchip PMIC RK8XX" diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile index f73b326255..e1d3545490 100644 --- a/drivers/power/pmic/Makefile +++ b/drivers/power/pmic/Makefile @@ -20,7 +20,7 @@ obj-$(CONFIG_PMIC_ACT8846) += act8846.o obj-$(CONFIG_PMIC_AS3722) += as3722.o as3722_gpio.o obj-$(CONFIG_$(SPL_)PMIC_AXP) += axp.o obj-$(CONFIG_PMIC_MAX8997) += max8997.o -obj-$(CONFIG_PMIC_PM8916) += pm8916.o +obj-$(CONFIG_PMIC_QCOM) += pmic_qcom.o obj-$(CONFIG_$(SPL_TPL_)PMIC_RK8XX) += rk8xx.o obj-$(CONFIG_PMIC_RN5T567) += rn5t567.o obj-$(CONFIG_PMIC_TPS65090) += tps65090.o diff --git a/drivers/power/pmic/pm8916.c b/drivers/power/pmic/pmic_qcom.c similarity index 52% rename from drivers/power/pmic/pm8916.c rename to drivers/power/pmic/pmic_qcom.c index 5f4386d4ad..ad8daf43f0 100644 --- a/drivers/power/pmic/pm8916.c +++ b/drivers/power/pmic/pmic_qcom.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Qualcomm pm8916 pmic driver + * Qualcomm generic pmic driver * * (C) Copyright 2015 Mateusz Kulikowski */ @@ -13,19 +13,19 @@ #define PID_MASK (0xFF << PID_SHIFT) #define REG_MASK 0xFF -struct pm8916_priv { +struct pmic_qcom_priv { uint32_t usid; /* Slave ID on SPMI bus */ }; -static int pm8916_reg_count(struct udevice *dev) +static int pmic_qcom_reg_count(struct udevice *dev) { return 0xFFFF; } -static int pm8916_write(struct udevice *dev, uint reg, const uint8_t *buff, - int len) +static int pmic_qcom_write(struct udevice *dev, uint reg, const uint8_t *buff, + int len) { - struct pm8916_priv *priv = dev_get_priv(dev); + struct pmic_qcom_priv *priv = dev_get_priv(dev); if (len != 1) return -EINVAL; @@ -35,9 +35,9 @@ static int pm8916_write(struct udevice *dev, uint reg, const uint8_t *buff, *buff); } -static int pm8916_read(struct udevice *dev, uint reg, uint8_t *buff, int len) +static int pmic_qcom_read(struct udevice *dev, uint reg, uint8_t *buff, int len) { - struct pm8916_priv *priv = dev_get_priv(dev); + struct pmic_qcom_priv *priv = dev_get_priv(dev); int val; if (len != 1) @@ -52,20 +52,20 @@ static int pm8916_read(struct udevice *dev, uint reg, uint8_t *buff, int len) return 0; } -static struct dm_pmic_ops pm8916_ops = { - .reg_count = pm8916_reg_count, - .read = pm8916_read, - .write = pm8916_write, +static struct dm_pmic_ops pmic_qcom_ops = { + .reg_count = pmic_qcom_reg_count, + .read = pmic_qcom_read, + .write = pmic_qcom_write, }; -static const struct udevice_id pm8916_ids[] = { +static const struct udevice_id pmic_qcom_ids[] = { { .compatible = "qcom,spmi-pmic" }, { } }; -static int pm8916_probe(struct udevice *dev) +static int pmic_qcom_probe(struct udevice *dev) { - struct pm8916_priv *priv = dev_get_priv(dev); + struct pmic_qcom_priv *priv = dev_get_priv(dev); priv->usid = dev_read_addr(dev); @@ -75,12 +75,12 @@ static int pm8916_probe(struct udevice *dev) return 0; } -U_BOOT_DRIVER(pmic_pm8916) = { - .name = "pmic_pm8916", +U_BOOT_DRIVER(pmic_qcom) = { + .name = "pmic_qcom", .id = UCLASS_PMIC, - .of_match = pm8916_ids, + .of_match = pmic_qcom_ids, .bind = dm_scan_fdt_dev, - .probe = pm8916_probe, - .ops = &pm8916_ops, - .priv_auto = sizeof(struct pm8916_priv), + .probe = pmic_qcom_probe, + .ops = &pmic_qcom_ops, + .priv_auto = sizeof(struct pmic_qcom_priv), };