From: Samuel Holland Date: Fri, 15 Jul 2022 03:34:53 +0000 (-0500) Subject: phy: sun4i-usb: Do not drive VBUS with external VBUS present X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=df202d996d72665c76d031849aa064c4881dc777;p=u-boot.git phy: sun4i-usb: Do not drive VBUS with external VBUS present It is possible to use host-side USB with externally-provided VBUS. For example, some USB OTG cables have an extra power input which powers both the board and the USB peripheral. To support this setup, skip enabling the VBUS switch/regulator if VBUS voltage is already present. This behavior matches the Linux PHY driver. Signed-off-by: Samuel Holland Signed-off-by: Andre Przywara --- diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c index 2e969ab91e..6428163c18 100644 --- a/drivers/phy/allwinner/phy-sun4i-usb.c +++ b/drivers/phy/allwinner/phy-sun4i-usb.c @@ -224,6 +224,12 @@ static int sun4i_usb_phy_power_on(struct phy *phy) initial_usb_scan_delay = 0; } + /* For phy0 only turn on Vbus if we don't have an ext. Vbus */ + if (phy->id == 0 && sun4i_usb_phy_vbus_detect(phy)) { + dev_warn(phy->dev, "External vbus detected, not enabling our own vbus\n"); + return 0; + } + if (dm_gpio_is_valid(&usb_phy->gpio_vbus)) dm_gpio_set_value(&usb_phy->gpio_vbus, 1);