From: Anton Bambura Date: Wed, 31 Jan 2024 06:57:16 +0000 (+0200) Subject: video: panel: add Samsung LTL106HL02 MIPI DSI panel driver X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=d6a6dd90790b886316e7596db6c0d99248ded0e2;p=u-boot.git video: panel: add Samsung LTL106HL02 MIPI DSI panel driver LTL106HL02 is a color active matrix TFT (Thin Film Transistor) liquid crystal display (LCD) that uses amorphous silicon TFT as switching devices. This model is composed of a TFT LCD panel, a driver circuit and a backlight unit. The resolution of a 10.6" contains 1920 x 1080 pixels and can display up to 16,8M color with wide viewing angle. Co-developed-by: Jonas Schwöbel Signed-off-by: Jonas Schwöbel Co-developed-by: Svyatoslav Ryhel Signed-off-by: Svyatoslav Ryhel Signed-off-by: Anton Bambura --- diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 742ea6edee..7808ae7919 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -555,6 +555,15 @@ config VIDEO_LCD_RENESAS_R69328 IPS-LCD module with Renesas R69328 IC. The panel has a 720x1280 resolution and uses 24 bit RGB per pixel. +config VIDEO_LCD_SAMSUNG_LTL106HL02 + tristate "Samsung LTL106HL02 1920x1080 DSI video mode panel" + depends on PANEL && BACKLIGHT + select VIDEO_MIPI_DSI + help + Say Y here if you want to enable support for Samsung LTL106HL02 + LCD module found in Microsoft Surface 2. The panel has a FullHD + resolution (1920x1080). + config VIDEO_LCD_SSD2828 bool "SSD2828 bridge chip" ---help--- diff --git a/drivers/video/Makefile b/drivers/video/Makefile index bb6d9b74b9..f3f70cd04a 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -63,6 +63,7 @@ obj-$(CONFIG_VIDEO_LCD_ORISETECH_OTM8009A) += orisetech_otm8009a.o obj-$(CONFIG_VIDEO_LCD_RAYDIUM_RM68200) += raydium-rm68200.o obj-$(CONFIG_VIDEO_LCD_RENESAS_R61307) += renesas-r61307.o obj-$(CONFIG_VIDEO_LCD_RENESAS_R69328) += renesas-r69328.o +obj-$(CONFIG_VIDEO_LCD_SAMSUNG_LTL106HL02) += samsung-ltl106hl02.o obj-$(CONFIG_VIDEO_LCD_SSD2828) += ssd2828.o obj-$(CONFIG_VIDEO_LCD_TDO_TL070WSH30) += tdo-tl070wsh30.o obj-$(CONFIG_VIDEO_MCDE_SIMPLE) += mcde_simple.o diff --git a/drivers/video/samsung-ltl106hl02.c b/drivers/video/samsung-ltl106hl02.c new file mode 100644 index 0000000000..5e6c11c4be --- /dev/null +++ b/drivers/video/samsung-ltl106hl02.c @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Samsung LTL106HL02-001 DSI panel driver + * + * Copyright (c) 2020 Anton Bambura + * Copyright (c) 2023 Svyatoslav Ryhel + * Copyright (c) 2024 Jonas Schwöbel + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +struct samsung_ltl106hl02_priv { + struct udevice *vdd; + struct udevice *backlight; + + struct gpio_desc reset_gpio; +}; + +static struct display_timing default_timing = { + .pixelclock.typ = 137000000, + .hactive.typ = 1920, + .hfront_porch.typ = 32, + .hback_porch.typ = 64, + .hsync_len.typ = 32, + .vactive.typ = 1080, + .vfront_porch.typ = 2, + .vback_porch.typ = 26, + .vsync_len.typ = 3, +}; + +static int samsung_ltl106hl02_enable_backlight(struct udevice *dev) +{ + struct mipi_dsi_panel_plat *plat = dev_get_plat(dev); + struct mipi_dsi_device *dsi = plat->device; + int ret; + + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret < 0) { + log_debug("%s: failed to exit sleep mode: %d\n", + __func__, ret); + return ret; + } + mdelay(70); + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret < 0) { + log_debug("%s: failed to enable display: %d\n", + __func__, ret); + return ret; + } + mdelay(5); + + return 0; +} + +static int samsung_ltl106hl02_set_backlight(struct udevice *dev, int percent) +{ + struct samsung_ltl106hl02_priv *priv = dev_get_priv(dev); + int ret; + + ret = backlight_enable(priv->backlight); + if (ret) + return ret; + + return backlight_set_brightness(priv->backlight, percent); +} + +static int samsung_ltl106hl02_timings(struct udevice *dev, + struct display_timing *timing) +{ + memcpy(timing, &default_timing, sizeof(*timing)); + return 0; +} + +static int samsung_ltl106hl02_of_to_plat(struct udevice *dev) +{ + struct samsung_ltl106hl02_priv *priv = dev_get_priv(dev); + int ret; + + ret = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev, + "backlight", &priv->backlight); + if (ret) { + log_debug("%s: cannot get backlight: ret = %d\n", + __func__, ret); + return ret; + } + + ret = uclass_get_device_by_phandle(UCLASS_REGULATOR, dev, + "vdd-supply", &priv->vdd); + if (ret) + log_debug("%s: cannot get vdd-supply: error %d\n", + __func__, ret); + + ret = gpio_request_by_name(dev, "reset-gpios", 0, + &priv->reset_gpio, GPIOD_IS_OUT); + if (ret) + log_debug("%s: cannot get reset-gpios: error %d\n", + __func__, ret); + + return 0; +} + +static int samsung_ltl106hl02_hw_init(struct udevice *dev) +{ + struct samsung_ltl106hl02_priv *priv = dev_get_priv(dev); + + dm_gpio_set_value(&priv->reset_gpio, 1); + regulator_set_enable_if_allowed(priv->vdd, 1); + + /* Dataheets states at least 8.5 msec for vdd stabilization */ + mdelay(10); + + dm_gpio_set_value(&priv->reset_gpio, 0); + + return 0; +} + +static int samsung_ltl106hl02_probe(struct udevice *dev) +{ + struct mipi_dsi_panel_plat *plat = dev_get_plat(dev); + + /* fill characteristics of DSI data link */ + plat->lanes = 4; + plat->format = MIPI_DSI_FMT_RGB888; + plat->mode_flags = MIPI_DSI_MODE_VIDEO; + + return samsung_ltl106hl02_hw_init(dev); +} + +static const struct panel_ops samsung_ltl106hl02_ops = { + .enable_backlight = samsung_ltl106hl02_enable_backlight, + .set_backlight = samsung_ltl106hl02_set_backlight, + .get_display_timing = samsung_ltl106hl02_timings, +}; + +static const struct udevice_id samsung_ltl106hl02_ids[] = { + { .compatible = "samsung,ltl106hl02-001" }, + { } +}; + +U_BOOT_DRIVER(samsung_ltl106hl02) = { + .name = "samsung_ltl106hl02", + .id = UCLASS_PANEL, + .of_match = samsung_ltl106hl02_ids, + .ops = &samsung_ltl106hl02_ops, + .of_to_plat = samsung_ltl106hl02_of_to_plat, + .probe = samsung_ltl106hl02_probe, + .plat_auto = sizeof(struct mipi_dsi_panel_plat), + .priv_auto = sizeof(struct samsung_ltl106hl02_priv), +};