From: Michal Simek Date: Fri, 24 Jun 2022 12:15:01 +0000 (+0200) Subject: microblaze: Add support for run time relocation X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=d58c007498;p=u-boot.git microblaze: Add support for run time relocation Microblaze is using NEEDS_MANUAL_RELOC from the beginnging. This is causing issues with function pointer arrays which need to be updated manually after relocation. Building code with -fPIC and linking with -pic will remove this limitation and there is no longer need to run manual update. By default still old option is enabled but by disabling NEEDS_MANUAL_RELOC code will be compiled for full relocation. The patch does couple of things which are connected to each other. - Define STATIC_RELA dependency to call relocate-rela to fill sections. - REMAKE_ELF was already enabled but u-boot file can't be used because sections are empty. relocate-rela will fill them and output file is u-boot.elf which should be used. - Add support for full relocation (u-boot.elf) - Add support for early relocation when u-boot.bin is loaded to different address then CONFIG_SYS_TEXT_BASE - Add rela.dyn and dynsym sections Disabling NEEDS_MANUAL_RELOC U-Boot size increased by 10% of it's original size (550kB to 608kB). Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/a845670b34925859b2e321875f7588a29f6655f9.1655299267.git.michal.simek@amd.com --- diff --git a/arch/Kconfig b/arch/Kconfig index 02de32f9c7..d91475d247 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -8,9 +8,6 @@ config CREATE_ARCH_SYMLINK config HAVE_ARCH_IOREMAP bool -config NEEDS_MANUAL_RELOC - bool - config SYS_CACHE_SHIFT_4 bool @@ -76,7 +73,6 @@ config M68K config MICROBLAZE bool "MicroBlaze architecture" - select NEEDS_MANUAL_RELOC select SUPPORT_OF_CONTROL imply CMD_IRQ diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 7f6e4310f1..d501c4c979 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -4,6 +4,9 @@ menu "M68000 architecture" config SYS_ARCH default "m68k" +config NEEDS_MANUAL_RELOC + def_bool y + # processor family config MCF520x select OF_CONTROL diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index d7d1b21970..6f45d19330 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -4,6 +4,20 @@ menu "MicroBlaze architecture" config SYS_ARCH default "microblaze" +config NEEDS_MANUAL_RELOC + bool "Disable position-independent pre-relocation code" + default y + help + U-Boot expects to be linked to a specific hard-coded address, and to + be loaded to and run from that address. This option lifts that + restriction, thus allowing the code to be loaded to and executed from + almost any 4K aligned address. This logic relies on the relocation + information that is embedded in the binary to support U-Boot + relocating itself to the top-of-RAM later during execution. + +config STATIC_RELA + def_bool y if !NEEDS_MANUAL_RELOC + choice prompt "Target select" optional diff --git a/arch/microblaze/config.mk b/arch/microblaze/config.mk index 3e84a832fc..d35b4f6db7 100644 --- a/arch/microblaze/config.mk +++ b/arch/microblaze/config.mk @@ -17,6 +17,11 @@ ifeq ($(CONFIG_SPL_BUILD),) PLATFORM_CPPFLAGS += -fPIC endif +ifeq ($(CONFIG_STATIC_RELA),y) +PLATFORM_CPPFLAGS += -fPIC +LDFLAGS_u-boot += -pic +endif + ifeq ($(CONFIG_SYS_LITTLE_ENDIAN),y) PLATFORM_ELFFLAGS += -B microblaze $(OBJCOPYFLAGS) -O elf32-microblazeel else diff --git a/arch/microblaze/cpu/Makefile b/arch/microblaze/cpu/Makefile index f7a83d07b6..1feffc6a97 100644 --- a/arch/microblaze/cpu/Makefile +++ b/arch/microblaze/cpu/Makefile @@ -6,4 +6,5 @@ extra-y = start.o obj-y = irq.o obj-y += interrupts.o cache.o exception.o timer.o +obj-$(CONFIG_STATIC_RELA) += relocate.o obj-$(CONFIG_SPL_BUILD) += spl.o diff --git a/arch/microblaze/cpu/relocate.c b/arch/microblaze/cpu/relocate.c new file mode 100644 index 0000000000..b00d02b1df --- /dev/null +++ b/arch/microblaze/cpu/relocate.c @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * (C) Copyright 2022 Advanced Micro Devices, Inc + * Michal Simek + */ + +#include +#include + +#define R_MICROBLAZE_NONE 0 +#define R_MICROBLAZE_32 1 +#define R_MICROBLAZE_REL 16 +#define R_MICROBLAZE_GLOB_DAT 18 + +/** + * mb_fix_rela - update relocation to new address + * @reloc_addr: new relocation address + * @verbose: enable version messages + * @rela_start: rela section start + * @rela_end: rela section end + * @dyn_start: dynamic section start + * @origin_addr: address where u-boot starts(doesn't need to be CONFIG_SYS_TEXT_BASE) + */ +void mb_fix_rela(u32 reloc_addr, u32 verbose, u32 rela_start, + u32 rela_end, u32 dyn_start, u32 origin_addr) +{ + u32 num, type, mask, i, reloc_off; + + /* + * Return in case u-boot.elf is used directly. + * Skip it when u-boot.bin is loaded to different address than + * CONFIG_SYS_TEXT_BASE. In this case relocation is necessary to run. + */ + if (reloc_addr == CONFIG_SYS_TEXT_BASE) { + debug_cond(verbose, + "Relocation address is the same - skip relocation\n"); + return; + } + + reloc_off = reloc_addr - origin_addr; + + debug_cond(verbose, "Relocation address:\t0x%08x\n", reloc_addr); + debug_cond(verbose, "Relocation offset:\t0x%08x\n", reloc_off); + debug_cond(verbose, "Origin address:\t0x%08x\n", origin_addr); + debug_cond(verbose, "Rela start:\t0x%08x\n", rela_start); + debug_cond(verbose, "Rela end:\t0x%08x\n", rela_end); + debug_cond(verbose, "Dynsym start:\t0x%08x\n", dyn_start); + + num = (rela_end - rela_start) / sizeof(Elf32_Rela); + + debug_cond(verbose, "Number of entries:\t%u\n", num); + + for (i = 0; i < num; i++) { + Elf32_Rela *rela; + u32 temp; + + rela = (Elf32_Rela *)(rela_start + sizeof(Elf32_Rela) * i); + + mask = 0xffULL; /* would be different on 32-bit */ + type = rela->r_info & mask; + + debug_cond(verbose, "\nRela possition:\t%d/0x%x\n", + i, (u32)rela); + + switch (type) { + case R_MICROBLAZE_REL: + temp = *(u32 *)rela->r_offset; + + debug_cond(verbose, "Type:\tREL\n"); + debug_cond(verbose, "Rela r_offset:\t\t0x%x\n", rela->r_offset); + debug_cond(verbose, "Rela r_info:\t\t0x%x\n", rela->r_info); + debug_cond(verbose, "Rela r_addend:\t\t0x%x\n", rela->r_addend); + debug_cond(verbose, "Value at r_offset:\t0x%x\n", temp); + + rela->r_offset += reloc_off; + rela->r_addend += reloc_off; + + temp = *(u32 *)rela->r_offset; + temp += reloc_off; + *(u32 *)rela->r_offset = temp; + + debug_cond(verbose, "New:Rela r_offset:\t0x%x\n", rela->r_offset); + debug_cond(verbose, "New:Rela r_addend:\t0x%x\n", rela->r_addend); + debug_cond(verbose, "New:Value at r_offset:\t0x%x\n", temp); + break; + case R_MICROBLAZE_32: + case R_MICROBLAZE_GLOB_DAT: + debug_cond(verbose, "Type:\t(32/GLOB) %u\n", type); + debug_cond(verbose, "Rela r_offset:\t\t0x%x\n", rela->r_offset); + debug_cond(verbose, "Rela r_info:\t\t0x%x\n", rela->r_info); + debug_cond(verbose, "Rela r_addend:\t\t0x%x\n", rela->r_addend); + debug_cond(verbose, "Value at r_offset:\t0x%x\n", temp); + + rela->r_offset += reloc_off; + + temp = *(u32 *)rela->r_offset; + temp += reloc_off; + *(u32 *)rela->r_offset = temp; + + debug_cond(verbose, "New:Rela r_offset:\t0x%x\n", rela->r_offset); + debug_cond(verbose, "New:Value at r_offset:\t0x%x\n", temp); + break; + case R_MICROBLAZE_NONE: + debug_cond(verbose, "R_MICROBLAZE_NONE - skip\n"); + break; + default: + debug_cond(verbose, "warning: unsupported relocation type %d at %x\n", + type, rela->r_offset); + } + } +} diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S index 72b0f33547..9a661e785f 100644 --- a/arch/microblaze/cpu/start.S +++ b/arch/microblaze/cpu/start.S @@ -10,8 +10,16 @@ #include #include +#if defined(CONFIG_STATIC_RELA) +#define SYM_ADDR(reg, reg_add, symbol) \ + mfs r20, rpc; \ + addik r20, r20, _GLOBAL_OFFSET_TABLE_ + 8; \ + lwi reg, r20, symbol@GOT; \ + addk reg, reg reg_add; +#else #define SYM_ADDR(reg, reg_add, symbol) \ addi reg, reg_add, symbol +#endif .text .global _start @@ -27,6 +35,39 @@ _start: addi r1, r0, CONFIG_SPL_STACK_ADDR #else add r1, r0, r20 +#if defined(CONFIG_STATIC_RELA) + bri 1f + + /* Force alignment for easier ASM code below */ +#define ALIGNMENT_ADDR 0x20 + .align 4 +uboot_dyn_start: + .word __rel_dyn_start + +uboot_dyn_end: + .word __rel_dyn_end + +uboot_sym_start: + .word __dyn_sym_start +1: + + addi r5, r20, 0 + add r6, r0, r0 + + lwi r7, r20, ALIGNMENT_ADDR + addi r7, r7, -CONFIG_SYS_TEXT_BASE + add r7, r7, r5 + lwi r8, r20, ALIGNMENT_ADDR + 0x4 + addi r8, r8, -CONFIG_SYS_TEXT_BASE + add r8, r8, r5 + lwi r9, r20, ALIGNMENT_ADDR + 0x8 + addi r9, r9, -CONFIG_SYS_TEXT_BASE + add r9, r9, r5 + addi r10, r0, CONFIG_SYS_TEXT_BASE + + brlid r15, mb_fix_rela + nop +#endif #endif addi r1, r1, -4 /* Decrement SP to top of memory */ @@ -297,6 +338,30 @@ relocate_code: brlid r15, __setup_exceptions nop +#if defined(CONFIG_STATIC_RELA) + /* reloc_offset is current location */ + SYM_ADDR(r10, r0, _start) + + /* r5 new address where I should copy code */ + add r5, r0, r7 /* Move reloc addr to r5 */ + + /* Verbose message */ + addi r6, r0, 0 + + SYM_ADDR(r7, r0, __rel_dyn_start) + rsub r7, r10, r7 + add r7, r7, r5 + SYM_ADDR(r8, r0, __rel_dyn_end) + rsub r8, r10, r8 + add r8, r8, r5 + SYM_ADDR(r9, r0, __dyn_sym_start) + rsub r9, r10, r9 + add r9, r9, r5 + brlid r15, mb_fix_rela + nop + + /* end of code which does relocation */ +#else /* Check if GOT exist */ addik r21, r23, _got_start addik r22, r23, _got_end @@ -314,6 +379,7 @@ relocate_code: cmpu r12, r21, r22 /* Check if this cross boundary */ bneid r12, 3b addik r21. r21, 4 +#endif /* Flush caches to ensure consistency */ addik r5, r0, 0 diff --git a/arch/microblaze/cpu/u-boot.lds b/arch/microblaze/cpu/u-boot.lds index 2b316cc7f5..821cc55d7b 100644 --- a/arch/microblaze/cpu/u-boot.lds +++ b/arch/microblaze/cpu/u-boot.lds @@ -46,6 +46,20 @@ SECTIONS } __init_end = . ; + . = ALIGN(4); + __rel_dyn_start = .; + .rela.dyn : { + *(.rela.dyn) + } + __rel_dyn_end = .; + + . = ALIGN(4); + __dyn_sym_start = .; + .dynsym : { + *(.dynsym) + } + __dyn_sym_end = .; + .bss ALIGN(0x4): { __bss_start = .; diff --git a/common/board_f.c b/common/board_f.c index 51d2f3c365..a5666ca77c 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -684,6 +684,8 @@ static int setup_reloc(void) #ifdef CONFIG_SYS_TEXT_BASE #ifdef ARM gd->reloc_off = gd->relocaddr - (unsigned long)__image_copy_start; +#elif defined(CONFIG_MICROBLAZE) + gd->reloc_off = gd->relocaddr - (u32)_start; #elif defined(CONFIG_M68K) /* * On all ColdFire arch cpu, monitor code starts always