From: Jonas Karlman <jonas@kwiboo.se>
Date: Sat, 6 May 2023 17:41:12 +0000 (+0000)
Subject: rockchip: rockpro64: Use SDMA to boost eMMC performance
X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=cf777572ca3128532bba17d5f65867f3471d9ae2;p=u-boot.git

rockchip: rockpro64: Use SDMA to boost eMMC performance

Enable the use of SDMA mode to boost eMMC performance on RockPro64.
Also add missing flags to indicate the supported MMC modes.

Using mmc read command to read 32 MiB data shows following improvement:

  => time mmc read 10000000 2000 10000

Before: time: 3.178 seconds
After: time: 0.402 seconds

This also enables CONFIG_SPL_FIT_SIGNATURE option to help discover
any possible future issue with loading TF-A into DRAM/SRAM.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
---

diff --git a/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
index 32a83b2855..bd864d0670 100644
--- a/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
@@ -15,6 +15,11 @@
 	};
 };
 
+&sdhci {
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+};
+
 &spi1 {
 	spi_flash: flash@0 {
 		bootph-all;
diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig
index 2b89b1baba..0ca2cecade 100644
--- a/configs/rockpro64-rk3399_defconfig
+++ b/configs/rockpro64-rk3399_defconfig
@@ -20,6 +20,7 @@ CONFIG_SPL_SPI=y
 CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
+CONFIG_SPL_FIT_SIGNATURE=y
 CONFIG_BOOTSTAGE=y
 CONFIG_BOOTSTAGE_REPORT=y
 CONFIG_USE_PREBOOT=y
@@ -63,6 +64,7 @@ CONFIG_ROCKCHIP_EFUSE=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
 CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPI_FLASH_GIGADEVICE=y