From: Benjamin Hahn Date: Thu, 8 Feb 2024 12:03:08 +0000 (+0100) Subject: imx8mp-phyboard-pollux-rdk: sync with kernel devicetree from v6.8-rc2 X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=a519d28cdb0e00828c0ede2d2b0e878136b7acfa;p=u-boot.git imx8mp-phyboard-pollux-rdk: sync with kernel devicetree from v6.8-rc2 sync devicetree with kernel v6.8-rc2. New commits on kernel v6.8-rc2: 4a58fcdb1818 arm64: dts: imx8mp-phyboard-pollux: Add support for RS232/RS485 3bd7fdcc359e arm64: dts: imx8mp-phyboard-pollux: Add gpio-line-names f5faa633daf8 arm64: dts: imx8mp-phyboard-pollux: Enable USB support 27c0dc128d04 arm64: dts: imx8mp-phyboard-pollux: Add flexcan support fa2a1ec50456 arm64: dts: imx8mp-phyboard-pollux: Add missing usdhc clocks assignment 055e38c76388 arm64: dts: imx8mp-phyboard-pollux-rdk: Fix led sub-node names Signed-off-by: Benjamin Hahn --- diff --git a/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts b/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts index 6aa720bafe..c8640cac3e 100644 --- a/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts +++ b/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts @@ -19,6 +19,36 @@ stdout-path = &uart1; }; + reg_can1_stby: regulator-can1-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1_reg>; + gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "can1-stby"; + }; + + reg_can2_stby: regulator-can2-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2_reg>; + gpio = <&gpio3 21 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "can2-stby"; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus>; + gpio = <&gpio1 12 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb1_host_vbus"; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -57,6 +87,21 @@ }; }; +/* CAN FD */ +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can2_stby>; + status = "okay"; +}; + &i2c2 { clock-frequency = <400000>; pinctrl-names = "default", "gpio"; @@ -76,15 +121,15 @@ compatible = "nxp,pca9533"; reg = <0x62>; - led1 { + led-1 { type = ; }; - led2 { + led-2 { type = ; }; - led3 { + led-3 { type = ; }; }; @@ -101,8 +146,51 @@ status = "okay"; }; +/* USB1 Host mode Type-A */ +&usb3_phy0 { + vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "host"; + status = "okay"; +}; + +/* USB2 4-port USB3.0 HUB */ +&usb3_phy1 { + status = "okay"; +}; + +&usb3_1 { + fsl,permanently-attached; + fsl,disable-port-power-control; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +/* RS232/RS485 */ +&uart2 { + assigned-clocks = <&clk IMX8MP_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + /* SD-Card */ &usdhc2 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_pins>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>; @@ -113,6 +201,33 @@ status = "okay"; }; +&gpio1 { + gpio-line-names = "", "", "X_PMIC_WDOG_B", "", + "PMIC_SD_VSEL", "", "", "", "", "", + "", "", "USB1_OTG_PWR", "", "", "X_nETHPHY_INT"; +}; + +&gpio2 { + gpio-line-names = "", "", "", "", + "", "", "", "", "", "", + "", "", "X_SD2_CD_B", "", "", "", + "", "", "", "SD2_RESET_B"; +}; + +&gpio3 { + gpio-line-names = "", "", "", "", + "", "", "", "", "", "", + "", "", "", "", "", "", + "", "", "", "", "nCAN1_EN", "nCAN2_EN"; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", + "", "", "", "", "", "", + "", "", "", "", "", "", + "", "", "X_PMIC_IRQ_B", "", "nENET0_INT_PWDN"; +}; + &iomuxc { pinctrl_eqos: eqosgrp { fsl,pins = < @@ -134,6 +249,32 @@ >; }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x154 + MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x154 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154 + MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154 + >; + }; + + pinctrl_flexcan1_reg: flexcan1reggrp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x154 + >; + }; + + pinctrl_flexcan2_reg: flexcan2reggrp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x154 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 @@ -161,6 +302,21 @@ >; }; + pinctrl_usb1_vbus: usb1vbusgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x10 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 + MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS 0x140 + MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS 0x140 + >; + }; + pinctrl_usdhc2_pins: usdhc2-gpiogrp { fsl,pins = < MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4