From: Jagan Teki Date: Tue, 7 Jul 2020 15:33:17 +0000 (+0530) Subject: arm: Remove cm_t54 board X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=a25aea733d804717e65c1825a0a1b26a6d22b41c;p=u-boot.git arm: Remove cm_t54 board DM, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Cc: Dmitry Lifshitz Signed-off-by: Jagan Teki --- diff --git a/arch/arm/mach-omap2/omap5/Kconfig b/arch/arm/mach-omap2/omap5/Kconfig index fddbac9dec..a7132dae09 100644 --- a/arch/arm/mach-omap2/omap5/Kconfig +++ b/arch/arm/mach-omap2/omap5/Kconfig @@ -156,7 +156,6 @@ endchoice endmenu endif -source "board/compulab/cm_t54/Kconfig" source "board/ti/omap5_uevm/Kconfig" source "board/ti/dra7xx/Kconfig" source "board/ti/am57xx/Kconfig" diff --git a/board/compulab/cm_t54/Kconfig b/board/compulab/cm_t54/Kconfig deleted file mode 100644 index 52d38804df..0000000000 --- a/board/compulab/cm_t54/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_CM_T54 - -config SYS_BOARD - default "cm_t54" - -config SYS_VENDOR - default "compulab" - -config SYS_CONFIG_NAME - default "cm_t54" - -endif diff --git a/board/compulab/cm_t54/MAINTAINERS b/board/compulab/cm_t54/MAINTAINERS deleted file mode 100644 index 461fe098c0..0000000000 --- a/board/compulab/cm_t54/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -CM_T54 BOARD -M: Dmitry Lifshitz -S: Maintained -F: board/compulab/cm_t54/ -F: include/configs/cm_t54.h -F: configs/cm_t54_defconfig diff --git a/board/compulab/cm_t54/Makefile b/board/compulab/cm_t54/Makefile deleted file mode 100644 index a907074414..0000000000 --- a/board/compulab/cm_t54/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2014 Compulab Ltd - http://compulab.co.il/ -# -# Author: Dmitry Lifshitz - -obj-y += cm_t54.o -obj-$(CONFIG_SPL_BUILD) += mux.o spl.o diff --git a/board/compulab/cm_t54/cm_t54.c b/board/compulab/cm_t54/cm_t54.c deleted file mode 100644 index 413f3c9c8f..0000000000 --- a/board/compulab/cm_t54/cm_t54.c +++ /dev/null @@ -1,261 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Board functions for Compulab CM-T54 board - * - * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ - * - * Author: Dmitry Lifshitz - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include "../common/eeprom.h" - -#define DIE_ID_REG_BASE (OMAP54XX_L4_CORE_BASE + 0x2000) -#define DIE_ID_REG_OFFSET 0x200 - -DECLARE_GLOBAL_DATA_PTR; - -#if !defined(CONFIG_SPL_BUILD) -inline void set_muxconf_regs(void){}; -#endif - -const struct omap_sysinfo sysinfo = { - "Board: CM-T54\n" -}; - -/* - * Routine: board_init - * Description: hardware init. - */ -int board_init(void) -{ - gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100); - - return 0; -} - -/* - * Routine: cm_t54_palmas_regulator_set - * Description: select voltage and turn on/off Palmas PMIC regulator. - */ -static int cm_t54_palmas_regulator_set(u8 vreg, u8 vval, u8 creg, u8 cval) -{ - int err; - - /* Setup voltage */ - err = palmas_i2c_write_u8(TWL603X_CHIP_P1, vreg, vval); - if (err) { - printf("cm_t54: could not set regulator 0x%02x voltage : %d\n", - vreg, err); - return err; - } - - /* Turn on/off regulator */ - err = palmas_i2c_write_u8(TWL603X_CHIP_P1, creg, cval); - if (err) { - printf("cm_t54: could not turn on/off regulator 0x%02x : %d\n", - creg, err); - return err; - } - - return 0; -} - -/* - * Routine: mmc_get_env_part - * Description: setup environment storage device partition. - */ -#ifdef CONFIG_SYS_MMC_ENV_PART -uint mmc_get_env_part(struct mmc *mmc) -{ - u32 bootmode = gd->arch.omap_boot_mode; - uint bootpart = CONFIG_SYS_MMC_ENV_PART; - - /* - * If booted from eMMC boot partition then force eMMC - * FIRST boot partition to be env storage - */ - if (bootmode == BOOT_DEVICE_MMC2) - bootpart = 1; - - return bootpart; -} -#endif - -#if defined(CONFIG_MMC) -#define SB_T54_CD_GPIO 228 -#define SB_T54_WP_GPIO 229 - -int board_mmc_init(bd_t *bis) -{ - int ret0, ret1; - - ret0 = omap_mmc_init(0, 0, 0, SB_T54_CD_GPIO, SB_T54_WP_GPIO); - if (ret0) - printf("cm_t54: failed to initialize mmc0\n"); - - ret1 = omap_mmc_init(1, 0, 0, -1, -1); - if (ret1) - printf("cm_t54: failed to initialize mmc1\n"); - - if (ret0 && ret1) - return -1; - - return 0; -} -#endif - -#ifdef CONFIG_USB_HOST_ETHER - -int ft_board_setup(void *blob, bd_t *bd) -{ - uint8_t enetaddr[6]; - - /* MAC addr */ - if (eth_env_get_enetaddr("usbethaddr", enetaddr)) { - fdt_find_and_setprop(blob, "/smsc95xx@0", "mac-address", - enetaddr, 6, 1); - } - - return 0; -} - -static void generate_mac_addr(uint8_t *enetaddr) -{ - int reg; - - reg = DIE_ID_REG_BASE + DIE_ID_REG_OFFSET; - - /* - * create a fake MAC address from the processor ID code. - * first byte is 0x02 to signify locally administered. - */ - enetaddr[0] = 0x02; - enetaddr[1] = readl(reg + 0x10) & 0xff; - enetaddr[2] = readl(reg + 0xC) & 0xff; - enetaddr[3] = readl(reg + 0x8) & 0xff; - enetaddr[4] = readl(reg) & 0xff; - enetaddr[5] = (readl(reg) >> 8) & 0xff; -} - -/* - * Routine: handle_mac_address - * Description: prepare MAC address for on-board Ethernet. - */ -static int handle_mac_address(void) -{ - uint8_t enetaddr[6]; - int ret; - - ret = eth_env_get_enetaddr("usbethaddr", enetaddr); - if (ret) - return 0; - - ret = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS); - if (ret || !is_valid_ethaddr(enetaddr)) - generate_mac_addr(enetaddr); - - if (!is_valid_ethaddr(enetaddr)) - return -1; - - return eth_env_set_enetaddr("usbethaddr", enetaddr); -} - -int board_eth_init(bd_t *bis) -{ - return handle_mac_address(); -} -#endif - -#ifdef CONFIG_USB_EHCI_HCD -static struct omap_usbhs_board_data usbhs_bdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC, - .port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC, -}; - -static void setup_host_clocks(bool enable) -{ - int usbhost_clk = OPTFCLKEN_HSIC60M_P3_CLK | - OPTFCLKEN_HSIC480M_P3_CLK | - OPTFCLKEN_HSIC60M_P2_CLK | - OPTFCLKEN_HSIC480M_P2_CLK | - OPTFCLKEN_UTMI_P3_CLK | - OPTFCLKEN_UTMI_P2_CLK; - - int usbtll_clk = OPTFCLKEN_USB_CH1_CLK_ENABLE | - OPTFCLKEN_USB_CH2_CLK_ENABLE; - - int usbhub_clk = CKOBUFFER_CLK_ENABLE_MASK; - - if (enable) { - /* Enable port 2 and 3 clocks*/ - setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, usbhost_clk); - /* Enable port 2 and 3 usb host ports tll clocks*/ - setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl, usbtll_clk); - /* Request FREF_XTAL_CLK clock for HSIC USB Hub */ - setbits_le32((*ctrl)->control_ckobuffer, usbhub_clk); - } else { - clrbits_le32((*ctrl)->control_ckobuffer, usbhub_clk); - clrbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl, usbtll_clk); - clrbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, usbhost_clk); - } -} - -int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **hccr, struct ehci_hcor **hcor) -{ - int ret; - - /* VCC_3V3_ETH */ - cm_t54_palmas_regulator_set(SMPS9_VOLTAGE, SMPS_VOLT_3V3, SMPS9_CTRL, - SMPS_MODE_SLP_AUTO | SMPS_MODE_ACT_AUTO); - - setup_host_clocks(true); - - ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor); - if (ret < 0) - printf("cm_t54: Failed to initialize ehci : %d\n", ret); - - return ret; -} - -int ehci_hcd_stop(void) -{ - int ret = omap_ehci_hcd_stop(); - - setup_host_clocks(false); - - cm_t54_palmas_regulator_set(SMPS9_VOLTAGE, SMPS_VOLT_OFF, - SMPS9_CTRL, SMPS_MODE_SLP_AUTO); - - return ret; -} - -void usb_hub_reset_devices(struct usb_hub_device *hub, int port) -{ - /* The LAN9730 needs to be reset after the port power has been set. */ - if (port == 3) { - gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 0); - udelay(10); - gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 1); - } -} -#endif - diff --git a/board/compulab/cm_t54/mux.c b/board/compulab/cm_t54/mux.c deleted file mode 100644 index ea90bc6e34..0000000000 --- a/board/compulab/cm_t54/mux.c +++ /dev/null @@ -1,94 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Pinmux configuration for Compulab CM-T54 board - * - * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ - * - * Author: Dmitry Lifshitz - */ - -#ifndef _CM_T54_MUX_DATA_H -#define _CM_T54_MUX_DATA_H - -#include -#include -#include - -const struct pad_conf_entry core_padconf_array_essential[] = { - /* MMC1 - SD CARD */ - {SDCARD_CLK, (PTU | IEN | M0)}, /* SDCARD_CLK */ - {SDCARD_CMD, (PTU | IEN | M0)}, /* SDCARD_CMD */ - {SDCARD_DATA0, (PTU | IEN | M0)}, /* SDCARD_DATA0 */ - {SDCARD_DATA1, (PTU | IEN | M0)}, /* SDCARD_DATA1 */ - {SDCARD_DATA2, (PTU | IEN | M0)}, /* SDCARD_DATA2 */ - {SDCARD_DATA3, (PTU | IEN | M0)}, /* SDCARD_DATA3 */ - - /* SD CARD CD and WP GPIOs*/ - {TIMER5_PWM_EVT, (PTU | IEN | M6)}, /* GPIO8_228 */ - {TIMER6_PWM_EVT, (PTU | IEN | M6)}, /* GPIO8_229 */ - - /* MMC2 - eMMC */ - {EMMC_CLK, (PTU | IEN | M0)}, /* EMMC_CLK */ - {EMMC_CMD, (PTU | IEN | M0)}, /* EMMC_CMD */ - {EMMC_DATA0, (PTU | IEN | M0)}, /* EMMC_DATA0 */ - {EMMC_DATA1, (PTU | IEN | M0)}, /* EMMC_DATA1 */ - {EMMC_DATA2, (PTU | IEN | M0)}, /* EMMC_DATA2 */ - {EMMC_DATA3, (PTU | IEN | M0)}, /* EMMC_DATA3 */ - {EMMC_DATA4, (PTU | IEN | M0)}, /* EMMC_DATA4 */ - {EMMC_DATA5, (PTU | IEN | M0)}, /* EMMC_DATA5 */ - {EMMC_DATA6, (PTU | IEN | M0)}, /* EMMC_DATA6 */ - {EMMC_DATA7, (PTU | IEN | M0)}, /* EMMC_DATA7 */ - - /* UART4 */ - {I2C5_SCL, (PTU | IEN | M2)}, /* UART4_RX */ - {I2C5_SDA, (M2)}, /* UART4_TX */ - - /* Led */ - {HSI2_CAFLAG, (PTU | M6)}, /* GPIO3_80 */ - - /* I2C1 */ - {I2C1_PMIC_SCL, (PTU | IEN | M0)}, /* I2C1_PMIC_SCL */ - {I2C1_PMIC_SDA, (PTU | IEN | M0)}, /* I2C1_PMIC_SDA */ - - /* USBB2, USBB3 */ - {USBB2_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB2_HSIC_STROBE */ - {USBB2_HSIC_DATA, (PTU | IEN | M0)}, /* USBB2_HSIC_DATA */ - {USBB3_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB3_HSIC_STROBE */ - {USBB3_HSIC_DATA, (PTU | IEN | M0)}, /* USBB3_HSIC_DATA */ - - /* USB Hub and USB Eth reset GPIOs */ - {HSI2_CAREADY, (PTD | M6)}, /* GPIO3_76 */ - {HSI2_ACDATA, (PTD | M6)}, /* GPIO3_83 */ - - /* I2C4 */ - {I2C4_SCL, (PTU | IEN | M0)}, /* I2C4_SCL */ - {I2C4_SDA, (PTU | IEN | M0)}, /* I2C4_SDA */ -}; - -const struct pad_conf_entry wkup_padconf_array_essential[] = { - {SR_PMIC_SCL, (PTU | IEN | M0)}, /* SR_PMIC_SCL */ - {SR_PMIC_SDA, (PTU | IEN | M0)}, /* SR_PMIC_SDA */ - {SYS_32K, (IEN | M0)}, /* SYS_32K */ - - /* USB Hub clock */ - {FREF_CLK1_OUT, (PTD | IEN | M0)}, /* FREF_CLK1_OUT */ -}; - -/* - * Routine: set_muxconf_regs - * Description: setup board pinmux configuration. - */ -void set_muxconf_regs(void) -{ - do_set_mux((*ctrl)->control_padconf_core_base, - core_padconf_array_essential, - sizeof(core_padconf_array_essential) / - sizeof(struct pad_conf_entry)); - - do_set_mux((*ctrl)->control_padconf_wkup_base, - wkup_padconf_array_essential, - sizeof(wkup_padconf_array_essential) / - sizeof(struct pad_conf_entry)); -} - -#endif /* _CM_T54_MUX_DATA_H */ diff --git a/board/compulab/cm_t54/spl.c b/board/compulab/cm_t54/spl.c deleted file mode 100644 index 9daec634cc..0000000000 --- a/board/compulab/cm_t54/spl.c +++ /dev/null @@ -1,65 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * SPL specific code for Compulab CM-T54 board - * - * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ - * - * Author: Dmitry Lifshitz - */ - -#include - -const struct emif_regs emif_regs_ddr3_532_mhz_cm_t54 = { -#if defined(CONFIG_DRAM_1G) || defined(CONFIG_DRAM_512M) - .sdram_config_init = 0x618522B2, - .sdram_config = 0x618522B2, -#elif defined(CONFIG_DRAM_2G) - .sdram_config_init = 0x618522BA, - .sdram_config = 0x618522BA, -#endif - .sdram_config2 = 0x0, - .ref_ctrl = 0x00001040, - .sdram_tim1 = 0xEEEF36F3, - .sdram_tim2 = 0x348F7FDA, - .sdram_tim3 = 0x027F88A8, - .read_idle_ctrl = 0x00050000, - .zq_config = 0x1007190B, - .temp_alert_config = 0x00000000, - - .emif_ddr_phy_ctlr_1_init = 0x0030400B, - .emif_ddr_phy_ctlr_1 = 0x0034400B, - .emif_ddr_ext_phy_ctrl_1 = 0x04040100, - .emif_ddr_ext_phy_ctrl_2 = 0x00000000, - .emif_ddr_ext_phy_ctrl_3 = 0x00000000, - .emif_ddr_ext_phy_ctrl_4 = 0x00000000, - .emif_ddr_ext_phy_ctrl_5 = 0x4350D435, - .emif_rd_wr_lvl_rmp_win = 0x00000000, - .emif_rd_wr_lvl_rmp_ctl = 0x80000000, - .emif_rd_wr_lvl_ctl = 0x00000000, - .emif_rd_wr_exec_thresh = 0x40000305, -}; - -const struct dmm_lisa_map_regs lisa_map_cm_t54 = { - .dmm_lisa_map_0 = 0x0, - .dmm_lisa_map_1 = 0x0, - -#ifdef CONFIG_DRAM_2G - .dmm_lisa_map_2 = 0x80740300, -#elif defined(CONFIG_DRAM_1G) - .dmm_lisa_map_2 = 0x80640300, -#elif defined(CONFIG_DRAM_512M) - .dmm_lisa_map_2 = 0x80500100, -#endif - .dmm_lisa_map_3 = 0x00000000, - .is_ma_present = 0x1, -}; - -void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) -{ - *regs = &emif_regs_ddr3_532_mhz_cm_t54; -} - -void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs) -{ - *dmm_lisa_regs = &lisa_map_cm_t54; -} diff --git a/configs/cm_t54_defconfig b/configs/cm_t54_defconfig deleted file mode 100644 index 51cbfbc002..0000000000 --- a/configs/cm_t54_defconfig +++ /dev/null @@ -1,53 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_ENV_SIZE=0x4000 -CONFIG_ENV_OFFSET=0xC0000 -CONFIG_SPL_TEXT_BASE=0x40300000 -CONFIG_OMAP54XX=y -CONFIG_TARGET_CM_T54=y -CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC=16296 -CONFIG_SPL=y -CONFIG_ENV_OFFSET_REDUND=0xC4000 -CONFIG_DISTRO_DEFAULTS=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTDELAY=3 -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_SYS_CONSOLE_INFO_QUIET=y -# CONFIG_MISC_INIT_R is not set -CONFIG_VERSION_VARIABLE=y -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 -# CONFIG_SPL_NAND_SUPPORT is not set -CONFIG_SPL_SATA_SUPPORT=y -CONFIG_SYS_PROMPT="CM-T54 # " -CONFIG_CMD_ASKENV=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_EEPROM_LAYOUT=y -CONFIG_EEPROM_LAYOUT_HELP_STRING="v2, v3" -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set -CONFIG_CMD_EXT4_WRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_SCSI_AHCI=y -CONFIG_SUPPORT_EMMC_BOOT=y -CONFIG_MMC_OMAP_HS=y -CONFIG_SCSI=y -CONFIG_CONS_INDEX=4 -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_ASIX=y -CONFIG_USB_ETHER_MCS7830=y -CONFIG_USB_ETHER_SMSC95XX=y -CONFIG_FAT_WRITE=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h deleted file mode 100644 index 50308fb28f..0000000000 --- a/include/configs/cm_t54.h +++ /dev/null @@ -1,120 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Config file for Compulab CM-T54 board - * - * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ - * - * Author: Dmitry Lifshitz - */ - -#ifndef __CONFIG_CM_T54_H -#define __CONFIG_CM_T54_H - -#define CONFIG_CM_T54 -#define CONFIG_DRAM_2G - -#define PARTS_DEFAULT - -#include - -/* EEPROM related defines */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_EEPROM_BUS 0 - -/* Enable SD/MMC CD and WP GPIOs */ -#define OMAP_HSMMC_USE_GPIO - -/* UART setup */ -#define CONFIG_SYS_NS16550_COM4 UART4_BASE - -/* MMC ENV related defines */ - -#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ -#define CONFIG_SYS_MMC_ENV_PART 0 - -/* Enhance our eMMC support / experience. */ -#define CONFIG_HSMMC2_8BIT - -/* SATA Boot related defines */ -#define CONFIG_SPL_SATA_BOOT_DEVICE 0 -#define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1 - -#define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) -/* USB UHH support options */ -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET - -#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 76 /* HSIC2 HUB #RESET */ -#define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 83 /* HSIC3 ETH #RESET */ - -/* Enabled commands */ - -/* EEPROM */ -#define CONFIG_ENV_EEPROM_IS_ON_I2C -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -#define CONFIG_SYS_EEPROM_SIZE 256 - -/* USB Networking options */ - -/* - * Miscellaneous configurable options - */ -#undef CONFIG_SYS_AUTOLOAD -#undef CONFIG_EXTRA_ENV_SETTINGS -#undef CONFIG_BOOTCOMMAND - -#define CONFIG_SYS_AUTOLOAD "no" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV \ - "baudrate=115200\0" \ - "bootdelay=3\0" \ - "autoload=no\0" \ - "bootscr=bootscr.img\0" \ - "fdtfile=omap5-sbc-t54.dtb\0" \ - "kernel=zImage-cm-t54\0" \ - "ramdisk=ramdisk-cm-t54.img\0" \ - "console=ttyO3\0" \ - "ramdisksize=16384\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk1p2\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "root=${mmcroot} rw rootwait\0" \ - "ramroot=/dev/ram0\0" \ - "ramargs=setenv bootargs console=${console} " \ - "root=${ramroot} ramdisk_size=${ramdisksize} rw\0" \ - "mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \ - "mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \ - "mmcloadramdisk=load mmc ${mmcdev} ${rdaddr} ${ramdisk}\0" \ - "mmcloadbootscript=load mmc ${mmcdev} ${loadaddr} ${bootsrc}\0" \ - "mmcbootscript=echo Running bootscript from mmc${mmcdev}...; " \ - "source ${loadaddr}\0" \ - "mmcbootlinux=echo Booting from mmc${mmcdev} ...; " \ - "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \ - "mmcboot=if mmc dev ${mmcdev} && mmc rescan; then " \ - "if run mmcloadbootscript; " \ - "then run mmcbootscript; " \ - "fi; " \ - "if run mmcloadkernel; then " \ - "if run mmcloadfdt; then " \ - "if run mmcloadramdisk; then " \ - "run ramargs; " \ - "run mmcbootlinux; " \ - "fi; " \ - "run mmcargs; " \ - "setenv rdaddr - ; " \ - "run mmcbootlinux; " \ - "fi; " \ - "fi; " \ - "fi;\0" - -#define CONFIG_BOOTCOMMAND \ - "bootcmd=run mmcboot || setenv mmcdev 1; setenv mmcroot /dev/mmcblk0p2; run mmcboot;" - -#endif /* __CONFIG_CM_T54_H */