From: Michal Simek Date: Mon, 3 Jun 2024 13:09:01 +0000 (+0200) Subject: arm64: zynqmp: Setup multiboot register to 0 X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=8ef61c22cd4374e4fcef8278041ec4f69587e394;p=u-boot.git arm64: zynqmp: Setup multiboot register to 0 On Kria when board starts from Image A or Image B partition multiboot register is already setup to that location. When reset command is called board is issuing soft reset which start SW at already used location (offset of multiboot * 32k). But board should continue to run from multiboot offset 0 (start of QSPI) and call early bootloader every reboot that's why clear multiboot register to 0 by default to go that route all the time. Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/edaf714a778bdd7447533a77b3455e4fd623f9da.1717420131.git.michal.simek@amd.com --- diff --git a/board/xilinx/zynqmp/zynqmp_kria.env b/board/xilinx/zynqmp/zynqmp_kria.env index 846eceb011..69e333c538 100644 --- a/board/xilinx/zynqmp/zynqmp_kria.env +++ b/board/xilinx/zynqmp/zynqmp_kria.env @@ -65,6 +65,7 @@ kd240_setup=i2c dev 1 && run usb_hub_init;zynqmp pmufw node 33; zynqmp pmufw nod tpm_setup=tpm autostart; board_setup=\ +zynqmp mmio_write 0xFFCA0010 0xfff 0; \ if test ${card1_name} = SCK-KV-G; then run kv260_setup; fi;\ if test ${card1_name} = SCK-KR-G; then run kr260_setup; fi;\ if test ${card1_name} = SCK-KD-G; then run kd240_setup; fi;\