From: Heiko Schocher Date: Wed, 25 May 2016 05:23:48 +0000 (+0200) Subject: arm: at91: taurus/axm: add DM and DTS support X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=8e6e8221c78ed283a45f8598c65ffe4d287dcf42;p=u-boot.git arm: at91: taurus/axm: add DM and DTS support add DM and DTS support for the at91 based siemens boards. Signed-off-by: Heiko Schocher Reviewed-by: Andreas Bießmann [rebased on current ToT] Signed-off-by: Andreas Bießmann --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 63b86f1ef1..5d463cea4a 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -3,6 +3,7 @@ # dtb-$(CONFIG_AT91FAMILY) += at91sam9260-smartweb.dtb \ + at91sam9g20-taurus.dtb \ at91sam9g45-corvus.dtb \ at91sam9g45-gurnard.dtb diff --git a/arch/arm/dts/at91sam9g20-taurus.dts b/arch/arm/dts/at91sam9g20-taurus.dts new file mode 100644 index 0000000000..f27d77279f --- /dev/null +++ b/arch/arm/dts/at91sam9g20-taurus.dts @@ -0,0 +1,119 @@ +/* + * at91sam9g20-taurus.dts + * (C) Copyright 2016 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD + * + * Licensed under GPLv2. + */ +/dts-v1/; +#include "at91sam9g20.dtsi" + +/ { + model = "Siemens taurus"; + compatible = "atmel,at91sam9g20ek", "atmel,at91sam9g20", "atmel,at91sam9"; + + chosen { + stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + pinctrl@fffff400 { + board { + pinctrl_pck0_as_mck: pck0_as_mck { + atmel,pins = + ; /* PC1 periph B */ + }; + + }; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart0: serial@fffb0000 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + &pinctrl_usart0_dtr_dsr + &pinctrl_usart0_dcd + &pinctrl_usart0_ri>; + status = "okay"; + }; + + usart1: serial@fffb4000 { + status = "okay"; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; + + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + ssc0: ssc@fffbc000 { + status = "okay"; + pinctrl-0 = <&pinctrl_ssc0_tx>; + }; + + spi0: spi@fffc8000 { + cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <50000000>; + reg = <1>; + }; + }; + + rtc@fffffd20 { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; + status = "okay"; + }; + + watchdog@fffffd40 { + status = "okay"; + }; + + gpbr: syscon@fffffd50 { + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 3adfe7eb35..13e19ba2fe 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -131,6 +131,10 @@ config TARGET_TAURUS bool "Support taurus" select CPU_ARM926EJS select SUPPORT_SPL + select DM + select DM_SERIAL + select DM_GPIO + select DM_ETH config TARGET_SMARTWEB bool "Support smartweb" diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c index b0385d8a6e..8da24be568 100644 --- a/board/siemens/taurus/taurus.c +++ b/board/siemens/taurus/taurus.c @@ -14,6 +14,7 @@ #include #include +#include #include #include #include @@ -21,17 +22,28 @@ #include #include #include +#include #include +#include #include #include #include #include #include +#ifndef CONFIG_DM_ETH #include +#endif DECLARE_GLOBAL_DATA_PTR; +static void taurus_request_gpio(void) +{ + gpio_request(CONFIG_SYS_NAND_ENABLE_PIN, "nand ena"); + gpio_request(CONFIG_SYS_NAND_READY_PIN, "nand rdy"); + gpio_request(AT91_PIN_PA25, "ena PHY"); +} + static void taurus_nand_hw_init(void) { struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; @@ -265,6 +277,7 @@ int board_early_init_f(void) at91_periph_clk_enable(ATMEL_ID_PIOC); at91_seriald_hw_init(); + taurus_request_gpio(); return 0; } @@ -308,6 +321,7 @@ int board_init(void) /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + taurus_request_gpio(); #ifdef CONFIG_CMD_NAND taurus_nand_hw_init(); #endif @@ -330,6 +344,7 @@ int dram_init(void) return 0; } +#ifndef CONFIG_DM_ETH int board_eth_init(bd_t *bis) { int rc = 0; @@ -338,6 +353,7 @@ int board_eth_init(bd_t *bis) #endif return rc; } +#endif #if !defined(CONFIG_SPL_BUILD) #if defined(CONFIG_BOARD_AXM) @@ -432,3 +448,12 @@ U_BOOT_CMD( ); #endif #endif + +static struct atmel_serial_platdata at91sam9260_serial_plat = { + .base_addr = ATMEL_BASE_DBGU, +}; + +U_BOOT_DEVICE(at91sam9260_serial) = { + .name = "serial_atmel", + .platdata = &at91sam9260_serial_plat, +}; diff --git a/configs/axm_defconfig b/configs/axm_defconfig index 0e0eadf684..d1f0c75875 100644 --- a/configs/axm_defconfig +++ b/configs/axm_defconfig @@ -1,8 +1,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_TAURUS=y +CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2068,BOARD_AXM" +CONFIG_HUSH_PARSER=y CONFIG_BOOTDELAY=3 # CONFIG_CMD_BDI is not set CONFIG_CMD_BOOTZ=y @@ -16,7 +18,8 @@ CONFIG_CMD_SPI=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y +CONFIG_OF_CONTROL=y +CONFIG_OF_EMBED=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_USE_TINY_PRINTF=y -CONFIG_OF_LIBFDT=y diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig index e566f7f023..f4515158bc 100644 --- a/configs/taurus_defconfig +++ b/configs/taurus_defconfig @@ -1,8 +1,10 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_TAURUS=y +CONFIG_DEFAULT_DEVICE_TREE="at91sam9g20-taurus" CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS" +CONFIG_HUSH_PARSER=y CONFIG_BOOTDELAY=3 CONFIG_SYS_PROMPT="U-Boot> " # CONFIG_CMD_BDI is not set @@ -19,6 +21,8 @@ CONFIG_CMD_DFU=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y +CONFIG_OF_CONTROL=y +CONFIG_OF_EMBED=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_USB=y @@ -28,4 +32,3 @@ CONFIG_G_DNL_MANUFACTURER="Siemens AG" CONFIG_G_DNL_VENDOR_NUM=0x0908 CONFIG_G_DNL_PRODUCT_NUM=0x02d2 CONFIG_USE_TINY_PRINTF=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 0b05289d07..882a4e5dbf 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -45,7 +45,7 @@ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG -#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO