From: Patrick Delaunay Date: Wed, 30 Jan 2019 12:07:04 +0000 (+0100) Subject: clk: stm32mp1: add debug information X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=8d6310aa0ba2bee92e14c0702c5ceec64943383a;p=u-boot.git clk: stm32mp1: add debug information Add support of clk dump command and display information during probe (under CONFIG_DISPLAY_CPUINFO). Signed-off-by: Patrick Delaunay --- diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig index 304688e56f..d20b2ab350 100644 --- a/configs/stm32mp15_basic_defconfig +++ b/configs/stm32mp15_basic_defconfig @@ -19,6 +19,7 @@ CONFIG_SYS_PROMPT="STM32MP> " # CONFIG_CMD_IMPORTENV is not set CONFIG_CMD_MEMINFO=y CONFIG_CMD_ADC=y +CONFIG_CMD_CLK=y CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y diff --git a/drivers/clk/clk_stm32mp1.c b/drivers/clk/clk_stm32mp1.c index 916f9f9e8c..09227cf8db 100644 --- a/drivers/clk/clk_stm32mp1.c +++ b/drivers/clk/clk_stm32mp1.c @@ -666,8 +666,8 @@ static const u8 stm32mp1_axi_div[8] = { 1, 2, 3, 4, 4, 4, 4, 4 }; -#ifdef DEBUG -static const char * const stm32mp1_clk_parent_name[_PARENT_NB] = { +static const __maybe_unused +char * const stm32mp1_clk_parent_name[_PARENT_NB] = { [_HSI] = "HSI", [_HSE] = "HSE", [_CSI] = "CSI", @@ -705,7 +705,8 @@ static const char * const stm32mp1_clk_parent_name[_PARENT_NB] = { [_DSI_PHY] = "DSI_PHY_PLL", }; -static const char * const stm32mp1_clk_parent_sel_name[_PARENT_SEL_NB] = { +static const __maybe_unused +char * const stm32mp1_clk_parent_sel_name[_PARENT_SEL_NB] = { [_I2C12_SEL] = "I2C12", [_I2C35_SEL] = "I2C35", [_I2C46_SEL] = "I2C46", @@ -724,7 +725,6 @@ static const char * const stm32mp1_clk_parent_sel_name[_PARENT_SEL_NB] = { [_DSI_SEL] = "DSI", [_ADC12_SEL] = "ADC12", }; -#endif static const struct stm32mp1_clk_data stm32mp1_data = { .gate = stm32mp1_clk_gate, @@ -1870,6 +1870,54 @@ static void stm32mp1_osc_init(struct udevice *dev) } } +static void __maybe_unused stm32mp1_clk_dump(struct stm32mp1_clk_priv *priv) +{ + char buf[32]; + int i, s, p; + + printf("Clocks:\n"); + for (i = 0; i < _PARENT_NB; i++) { + printf("- %s : %s MHz\n", + stm32mp1_clk_parent_name[i], + strmhz(buf, stm32mp1_clk_get(priv, i))); + } + printf("Source Clocks:\n"); + for (i = 0; i < _PARENT_SEL_NB; i++) { + p = (readl(priv->base + priv->data->sel[i].offset) >> + priv->data->sel[i].src) & priv->data->sel[i].msk; + if (p < priv->data->sel[i].nb_parent) { + s = priv->data->sel[i].parent[p]; + printf("- %s(%d) => parent %s(%d)\n", + stm32mp1_clk_parent_sel_name[i], i, + stm32mp1_clk_parent_name[s], s); + } else { + printf("- %s(%d) => parent index %d is invalid\n", + stm32mp1_clk_parent_sel_name[i], i, p); + } + } +} + +#ifdef CONFIG_CMD_CLK +int soc_clk_dump(void) +{ + struct udevice *dev; + struct stm32mp1_clk_priv *priv; + int ret; + + ret = uclass_get_device_by_driver(UCLASS_CLK, + DM_GET_DRIVER(stm32mp1_clock), + &dev); + if (ret) + return ret; + + priv = dev_get_priv(dev); + + stm32mp1_clk_dump(priv); + + return 0; +} +#endif + static int stm32mp1_clk_probe(struct udevice *dev) { int result = 0; @@ -1893,6 +1941,33 @@ static int stm32mp1_clk_probe(struct udevice *dev) result = stm32mp1_clktree(dev); #endif +#ifndef CONFIG_SPL_BUILD +#if defined(DEBUG) + /* display debug information for probe after relocation */ + if (gd->flags & GD_FLG_RELOC) + stm32mp1_clk_dump(priv); +#endif + +#if defined(CONFIG_DISPLAY_CPUINFO) + if (gd->flags & GD_FLG_RELOC) { + char buf[32]; + + printf("Clocks:\n"); + printf("- MPU : %s MHz\n", + strmhz(buf, stm32mp1_clk_get(priv, _CK_MPU))); + printf("- MCU : %s MHz\n", + strmhz(buf, stm32mp1_clk_get(priv, _CK_MCU))); + printf("- AXI : %s MHz\n", + strmhz(buf, stm32mp1_clk_get(priv, _ACLK))); + printf("- PER : %s MHz\n", + strmhz(buf, stm32mp1_clk_get(priv, _CK_PER))); + /* DDRPHYC father */ + printf("- DDR : %s MHz\n", + strmhz(buf, stm32mp1_clk_get(priv, _PLL2_R))); + } +#endif /* CONFIG_DISPLAY_CPUINFO */ +#endif + return result; }