From: William Zhang Date: Mon, 16 Sep 2024 09:58:49 +0000 (+0200) Subject: mtd: rawnand: brcmnand: Add support for getting ecc setting from strap X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=7ed8bcdcfb1b0c4979b8be3b8831eb71ab7bf53e;p=u-boot.git mtd: rawnand: brcmnand: Add support for getting ecc setting from strap Backport from the upstream Linux kernel commit c2cf7e25eb2a3c915a420fb8ceed8912add7f36c "mtd: rawnand: brcmnand: Add support for getting ecc setting from strap" Note: the upstream kernel introduces a new bool brcmnand_get_sector_size_1k() function because the int version in U-Boot has been removed in Linux. I kept the old int-returning version that is already in U-Boot as we depend on that in other code. BCMBCA broadband SoC based board design does not specify ecc setting in dts but rather use the SoC NAND strap info to obtain the ecc strength and spare area size setting. Add brcm,nand-ecc-use-strap dts propety for this purpose and update driver to support this option. However these two options can not be used at the same time. Signed-off-by: William Zhang Reviewed-by: David Regan Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20240301173308.226004-1-william.zhang@broadcom.com Signed-off-by: Linus Walleij Reviewed-by: William Zhang Tested-by: William Zhang --- diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c index 071b339516..749553c9df 100644 --- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c +++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c @@ -980,6 +980,43 @@ static void brcmnand_set_sector_size_1k(struct brcmnand_host *host, int val) nand_writereg(ctrl, acc_control_offs, tmp); } +static int brcmnand_get_spare_size(struct brcmnand_host *host) +{ + struct brcmnand_controller *ctrl = host->ctrl; + u16 acc_control_offs = brcmnand_cs_offset(ctrl, host->cs, + BRCMNAND_CS_ACC_CONTROL); + u32 acc = nand_readreg(ctrl, acc_control_offs); + + return (acc & brcmnand_spare_area_mask(ctrl)); +} + +static void brcmnand_get_ecc_settings(struct brcmnand_host *host, struct nand_chip *chip) +{ + struct brcmnand_controller *ctrl = host->ctrl; + u16 acc_control_offs = brcmnand_cs_offset(ctrl, host->cs, + BRCMNAND_CS_ACC_CONTROL); + bool sector_size_1k = brcmnand_get_sector_size_1k(host); + int spare_area_size, ecc_level; + u32 acc; + + spare_area_size = brcmnand_get_spare_size(host); + acc = nand_readreg(ctrl, acc_control_offs); + ecc_level = (acc & brcmnand_ecc_level_mask(ctrl)) >> ctrl->ecc_level_shift; + if (sector_size_1k) + chip->ecc.strength = ecc_level * 2; + else if (spare_area_size == 16 && ecc_level == 15) + chip->ecc.strength = 1; /* hamming */ + else + chip->ecc.strength = ecc_level; + + if (chip->ecc.size == 0) { + if (sector_size_1k) + chip->ecc.size = 1024; + else + chip->ecc.size = 512; + } +} + /*********************************************************************** * CS_NAND_SELECT ***********************************************************************/ @@ -2323,12 +2360,33 @@ static int brcmnand_setup_dev(struct brcmnand_host *host) struct nand_memory_organization *memorg = nanddev_get_memorg(nanddev); struct brcmnand_controller *ctrl = host->ctrl; struct brcmnand_cfg *cfg = &host->hwcfg; - char msg[128]; u32 offs, tmp, oob_sector; + bool use_strap = false; + char msg[128]; int ret; memset(cfg, 0, sizeof(*cfg)); +#ifndef __UBOOT__ + use_strap = of_property_read_bool(nand_get_flash_node(chip), + "brcm,nand-ecc-use-strap"): +#else + use_strap = ofnode_read_bool(nand_get_flash_node(chip), + "brcm,nand-ecc-use-strap"); +#endif /* __UBOOT__ */ + /* + * Either nand-ecc-xxx or brcm,nand-ecc-use-strap can be set. Error out + * if both exist. + */ + if (chip->ecc.strength && use_strap) { + dev_err(ctrl->dev, + "ECC strap and DT ECC configuration properties are mutually exclusive\n"); + return -EINVAL; + } + + if (use_strap) + brcmnand_get_ecc_settings(host, chip); + #ifndef __UBOOT__ ret = of_property_read_u32(nand_get_flash_node(chip), "brcm,nand-oob-sector-size", @@ -2338,10 +2396,14 @@ static int brcmnand_setup_dev(struct brcmnand_host *host) "brcm,nand-oob-sector-size", &oob_sector); #endif /* __UBOOT__ */ + if (ret) { - /* Use detected size */ - cfg->spare_area_size = mtd->oobsize / - (mtd->writesize >> FC_SHIFT); + if (use_strap) + cfg->spare_area_size = brcmnand_get_spare_size(host); + else + /* Use detected size */ + cfg->spare_area_size = mtd->oobsize / + (mtd->writesize >> FC_SHIFT); } else { cfg->spare_area_size = oob_sector; }