From: Ye Li <ye.li@nxp.com>
Date: Thu, 19 Sep 2024 04:01:27 +0000 (+0800)
Subject: imx9: clock: Update clock init function and sequence
X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=7872a986e5834bcc387788968e7f9f520f2cb140;p=u-boot.git

imx9: clock: Update clock init function and sequence

Since we use SPEED GRADE fuse to set A55 frequency, remove the
set_arm_core_low_drive_clk function which has hard coded frequency.
And adjust clock_init called sequence and split it to early and late
functions.
Set the authen register in early function, because CCF driver checks
NS bit.
Set bus and core clock in late function, because the fuse read and
SoC type/rev depend on ELE.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---

diff --git a/arch/arm/include/asm/arch-imx9/clock.h b/arch/arm/include/asm/arch-imx9/clock.h
index 1ce6ac4c3a..76f1211859 100644
--- a/arch/arm/include/asm/arch-imx9/clock.h
+++ b/arch/arm/include/asm/arch-imx9/clock.h
@@ -211,7 +211,8 @@ struct imx_clk_setting {
 	u32 div;
 };
 
-int clock_init(void);
+int clock_init_early(void);
+int clock_init_late(void);
 u32 get_clk_src_rate(enum ccm_clk_src source);
 u32 get_lpuart_clk(void);
 void init_uart_clk(u32 index);
diff --git a/arch/arm/mach-imx/imx9/clock.c b/arch/arm/mach-imx/imx9/clock.c
index 1433e68874..76d19f1cba 100644
--- a/arch/arm/mach-imx/imx9/clock.c
+++ b/arch/arm/mach-imx/imx9/clock.c
@@ -782,17 +782,10 @@ void bus_clock_init(void)
 	}
 }
 
-int clock_init(void)
+int clock_init_early(void)
 {
 	int i;
 
-	if (is_voltage_mode(VOLT_LOW_DRIVE)) {
-		bus_clock_init_low_drive();
-		set_arm_clk(MHZ(900));
-	} else {
-		bus_clock_init();
-	}
-
 	/* allow for non-secure access */
 	for (i = 0; i < OSCPLL_END; i++)
 		ccm_clk_src_tz_access(i, true, false, false);
@@ -809,6 +802,19 @@ int clock_init(void)
 	return 0;
 }
 
+/* Set bus and A55 core clock per voltage mode */
+int clock_init_late(void)
+{
+	if (is_voltage_mode(VOLT_LOW_DRIVE)) {
+		bus_clock_init_low_drive();
+		set_arm_core_max_clk();
+	} else {
+		bus_clock_init();
+	}
+
+	return 0;
+}
+
 int set_clk_eqos(enum enet_freq type)
 {
 	u32 eqos_post_div;
diff --git a/arch/arm/mach-imx/imx9/soc.c b/arch/arm/mach-imx/imx9/soc.c
index 52aafcbf99..44e2166509 100644
--- a/arch/arm/mach-imx/imx9/soc.c
+++ b/arch/arm/mach-imx/imx9/soc.c
@@ -741,7 +741,7 @@ int arch_cpu_init(void)
 		/* Disable wdog */
 		init_wdog();
 
-		clock_init();
+		clock_init_early();
 
 		trdc_early_init();
 
diff --git a/board/freescale/imx93_evk/spl.c b/board/freescale/imx93_evk/spl.c
index e4999baa95..2ad7489ada 100644
--- a/board/freescale/imx93_evk/spl.c
+++ b/board/freescale/imx93_evk/spl.c
@@ -123,9 +123,11 @@ void board_init_f(ulong dummy)
 		debug("LC: 0x%x\n", gd->arch.lifecycle);
 	}
 
+	clock_init_late();
+
 	power_init_board();
 
-	if (!IS_ENABLED(CONFIG_IMX9_LOW_DRIVE_MODE))
+	if (!is_voltage_mode(VOLT_LOW_DRIVE))
 		set_arm_clk(get_cpu_speed_grade_hz());
 
 	/* Init power of mix */
diff --git a/board/phytec/phycore_imx93/spl.c b/board/phytec/phycore_imx93/spl.c
index 5efa38a144..17a8736c73 100644
--- a/board/phytec/phycore_imx93/spl.c
+++ b/board/phytec/phycore_imx93/spl.c
@@ -130,7 +130,7 @@ void board_init_f(ulong dummy)
 		debug("LC: 0x%x\n", gd->arch.lifecycle);
 	}
 
-	clock_init();
+	clock_init_late();
 
 	power_init_board();