From: Ladislav Michl Date: Thu, 18 Feb 2010 02:13:53 +0000 (-0500) Subject: netstar.h: do not exceed 80 columns X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=779b534385adf0a1efdd8b40dbacae11598575b8;p=u-boot.git netstar.h: do not exceed 80 columns Limit line length to 80 characters mostly by removing obvious and sometimes misleading comments. Fix indentation, too. Signed-off-by: Ladislav Michl Signed-off-by: Sandeep Paulraj --- diff --git a/include/configs/netstar.h b/include/configs/netstar.h index edda3ce56e..c63c84650f 100644 --- a/include/configs/netstar.h +++ b/include/configs/netstar.h @@ -27,17 +27,13 @@ #include -/* - * High Level Configuration Options - * (easy to change) - */ #define CONFIG_ARM925T 1 /* This is an arm925t CPU */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP1510 1 /* which is in a 5910 */ /* Input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz input clock */ -#define CONFIG_XTAL_FREQ 12000000 +#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz */ +#define CONFIG_XTAL_FREQ 12000000 /* 12MHz */ #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ @@ -54,10 +50,10 @@ /* * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024) -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 0x10000000 +#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024) +#define PHYS_FLASH_1 0x00000000 #define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) @@ -66,23 +62,23 @@ * Environment settings */ #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR 0x4000 -#define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_ENV_SECT_SIZE (8 * 1024) -#define CONFIG_ENV_ADDR_REDUND 0x6000 -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#define CONFIG_ENV_ADDR 0x4000 +#define CONFIG_ENV_SIZE (8 * 1024) +#define CONFIG_ENV_SECT_SIZE (8 * 1024) +#define CONFIG_ENV_ADDR_REDUND 0x6000 +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE #define CONFIG_ENV_OVERWRITE /* * Size of malloc() pool */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) /* * The stack size is set up in start.S using the settings below */ -#define CONFIG_STACKSIZE (1 * 1024 * 1024) /* regular stack */ +#define CONFIG_STACKSIZE (1 * 1024 * 1024) /* * Hardware drivers @@ -90,8 +86,8 @@ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK (CONFIG_XTAL_FREQ) /* can be 12M/32Khz or 48Mhz */ -#define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE /* uart1 */ +#define CONFIG_SYS_NS16550_CLK (CONFIG_XTAL_FREQ) +#define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE #define CONFIG_NET_MULTI #define CONFIG_SMC91111 @@ -128,10 +124,10 @@ /*#define CONFIG_SKIP_LOWLEVEL_INIT */ /* - * partitions (mtdparts command line support) + * Partitions (mtdparts command line support) */ #define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_MTD_DEVICE #define CONFIG_FLASH_CFI_MTD #define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=gen_nand.0" #define MTDPARTS_DEFAULT "mtdparts=" \ @@ -139,7 +135,7 @@ "gen_nand.0:4M(kernel0),40M(rootfs0),4M(kernel1),40M(rootfs1),-(data)" /* - * Command line configuration. + * Command line configuration */ #define CONFIG_CMD_BDI #define CONFIG_CMD_BOOTD @@ -204,12 +200,13 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "# " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "# " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " @@ -217,9 +214,9 @@ #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 #define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \ - (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE) + (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE) -#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1 + 0x400000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x400000) /* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1. * This time is further subdivided by a local divisor. @@ -228,9 +225,9 @@ #define CONFIG_SYS_PTV 7 #define CONFIG_SYS_HZ 1000 -#define OMAP5910_DPLL_DIV 1 -#define OMAP5910_DPLL_MUL ((CONFIG_SYS_CLK_FREQ * \ - (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ) +#define OMAP5910_DPLL_DIV 1 +#define OMAP5910_DPLL_MUL \ + ((CONFIG_SYS_CLK_FREQ * (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ) #define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */ #define OMAP5910_LCD_DIV 2 /* CKL/4 */ @@ -240,7 +237,7 @@ #define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */ #define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */ -#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b Clock Enable */ +#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b */ #define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) | \ (OMAP5910_LCD_DIV << 2) | \ (OMAP5910_ARM_DIV << 4) | \