From: Tony Dinh Date: Wed, 26 Jan 2022 03:33:44 +0000 (-0800) Subject: arm: kirkwood: GoFlex Home : Use Marvell uclass mvgbe and PHY driver for Ethernet X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=648f8d5f6b1db3920e84ab5085568b1eb29b8c5e;p=u-boot.git arm: kirkwood: GoFlex Home : Use Marvell uclass mvgbe and PHY driver for Ethernet The GoFlex Home board has the network chip Marvell 88E1116R. Use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Enable CONFIG_PHY_MARVELL to properly configure the network. - Miscellaneous changes: use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, use BIT macro, and cleanup comments. Signed-off-by: Tony Dinh Reviewed-by: Pali Rohár Reviewed-by: Stefan Roese --- diff --git a/board/Seagate/goflexhome/goflexhome.c b/board/Seagate/goflexhome/goflexhome.c index 52be64fb8c..caea89c10e 100644 --- a/board/Seagate/goflexhome/goflexhome.c +++ b/board/Seagate/goflexhome/goflexhome.c @@ -1,10 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2021 - * Tony Dinh - * Suriyan Ramasami - * - * Copyright (C) 2013 Suriyan Ramasami + * Copyright (C) 2021-2022 Tony Dinh + * Copyright (C) 2013-2021 Suriyan Ramasami * * Based on dockstar.c originally written by * Copyright (C) 2010 Eric C. Cooper @@ -18,14 +15,14 @@ #include #include #include -#include -#include +#include #include #include #include #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -98,6 +95,11 @@ int board_early_init_f(void) return 0; } +int board_eth_init(struct bd_info *bis) +{ + return cpu_eth_init(bis); +} + int board_init(void) { /* @@ -111,73 +113,9 @@ int board_init(void) return 0; } -static int fdt_get_phy_addr(const char *path) -{ - const void *fdt = gd->fdt_blob; - const u32 *reg; - const u32 *val; - int node, phandle, addr; - - /* Find the node by its full path */ - node = fdt_path_offset(fdt, path); - if (node >= 0) { - /* Look up phy-handle */ - val = fdt_getprop(fdt, node, "phy-handle", NULL); - if (val) { - phandle = fdt32_to_cpu(*val); - if (!phandle) - return -1; - /* Follow it to its node */ - node = fdt_node_offset_by_phandle(fdt, phandle); - if (node) { - /* Look up reg */ - reg = fdt_getprop(fdt, node, "reg", NULL); - if (reg) { - addr = fdt32_to_cpu(*reg); - return addr; - } - } - } - } - return -1; -} - -#ifdef CONFIG_RESET_PHY_R -/* Configure and enable MV88E1116 PHY */ -void reset_phy(void) -{ - u16 reg; - int phyaddr; - char *name = "ethernet-controller@72000"; - char *eth0_path = "/ocp@f1000000/ethernet-controller@72000/ethernet0-port@0"; - - if (miiphy_set_current_dev(name)) - return; - - phyaddr = fdt_get_phy_addr(eth0_path); - if (phyaddr < 0) - return; - - /* - * Enable RGMII delay on Tx and Rx for CPU port - * Ref: sec 4.7.2 of chip datasheet - */ - miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 2); - miiphy_read(name, phyaddr, MV88E1116_MAC_CTRL_REG, ®); - reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); - miiphy_write(name, phyaddr, MV88E1116_MAC_CTRL_REG, reg); - miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 0); - - /* reset the phy */ - miiphy_reset(name, phyaddr); - - printf("88E1116 Initialized on %s\n", name); -} -#endif /* CONFIG_RESET_PHY_R */ - #if CONFIG_IS_ENABLED(BOOTSTAGE) -#define GREEN_LED (1 << 14) -#define ORANGE_LED (1 << 15) +#define GREEN_LED BIT(14) +#define ORANGE_LED BIT(15) #define BOTH_LEDS (GREEN_LED | ORANGE_LED) #define NEITHER_LED 0 diff --git a/configs/goflexhome_defconfig b/configs/goflexhome_defconfig index ec8b7398d0..e6eb00a938 100644 --- a/configs/goflexhome_defconfig +++ b/configs/goflexhome_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y +CONFIG_SYS_THUMB_BUILD=y CONFIG_ARCH_KIRKWOOD=y CONFIG_SYS_KWD_CONFIG="board/Seagate/goflexhome/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 @@ -47,6 +48,7 @@ CONFIG_SATA_MV=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y +CONFIG_PHY_MARVELL=y CONFIG_DM_ETH=y CONFIG_MVGBE=y CONFIG_MII=y diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h index 90e37d9853..c279579268 100644 --- a/include/configs/goflexhome.h +++ b/include/configs/goflexhome.h @@ -1,5 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* + * Copyright (C) 2022 Tony Dinh * Copyright (C) 2013 Suriyan Ramasami * * Based on dockstar.h originally written by @@ -14,32 +15,18 @@ #ifndef _CONFIG_GOFLEXHOME_H #define _CONFIG_GOFLEXHOME_H +#include + /* * Default GPIO configuration and LED status */ #define GOFLEXHOME_OE_LOW (~(0)) #define GOFLEXHOME_OE_HIGH (~(0)) -#define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */ -#define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */ - -/* PHY related */ -#define MV88E1116_LED_FCTRL_REG 10 -#define MV88E1116_CPRSP_CR3_REG 21 -#define MV88E1116_MAC_CTRL_REG 21 -#define MV88E1116_PGADR_REG 22 -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) +#define GOFLEXHOME_OE_VAL_LOW BIT(29) /* USB_PWEN low */ +#define GOFLEXHOME_OE_VAL_HIGH BIT(17) /* LED pin high */ #include "mv-common.h" -/* - * Environment variables configurations - */ -/* - * max 4k env size is enough, but in case of nand - * it has to be rounded to sector size - */ - /* * Default environment variables */ @@ -47,22 +34,21 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ "mtdids=nand0=orion_nand\0" \ - "mtdparts="CONFIG_MTDPARTS_DEFAULT \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT \ "kernel=/boot/uImage\0" \ "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0" /* * Ethernet Driver configuration */ -#ifdef CONFIG_CMD_NET #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 0 -#endif /* CONFIG_CMD_NET */ +#ifdef CONFIG_RESET_PHY_R +#undef CONFIG_RESET_PHY_R /* remove legacy reset_phy() */ +#endif /* SATA driver configuration */ -#ifdef CONFIG_SATA #define CONFIG_SYS_SATA_MAX_DEVICE 1 #define CONFIG_LBA48 -#endif /* CONFIG_SATA */ #endif /* _CONFIG_GOFLEXHOME_H */