From: Patrick Delaunay Date: Wed, 16 Sep 2020 08:01:32 +0000 (+0200) Subject: ARM: dts: stm32mp1: DT alignment with Linux kernel v5.9-rc4 X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=62f95af92a3f;p=u-boot.git ARM: dts: stm32mp1: DT alignment with Linux kernel v5.9-rc4 DT alignment with Linux kernel v5.9-rc4 for the STM32MP15x soc device tree files and the STMicroelectronics boards device tree files. Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard --- diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi index e9525b5d06..154832983c 100644 --- a/arch/arm/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi @@ -1573,6 +1573,20 @@ }; }; + spi4_pins_a: spi4-0 { + pins { + pinmux = , /* SPI4_SCK */ + ; /* SPI4_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = ; /* SPI4_MISO */ + bias-disable; + }; + }; + stusb1600_pins_a: stusb1600-0 { pins { pinmux = ; @@ -1580,6 +1594,133 @@ }; }; + uart4_pins_a: uart4-0 { + pins1 { + pinmux = ; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_idle_pins_a: uart4-idle-0 { + pins1 { + pinmux = ; /* UART4_TX */ + }; + pins2 { + pinmux = ; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_sleep_pins_a: uart4-sleep-0 { + pins { + pinmux = , /* UART4_TX */ + ; /* UART4_RX */ + }; + }; + + uart4_pins_b: uart4-1 { + pins1 { + pinmux = ; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_pins_c: uart4-2 { + pins1 { + pinmux = ; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* UART4_RX */ + bias-disable; + }; + }; + + uart7_pins_a: uart7-0 { + pins1 { + pinmux = ; /* UART7_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = , /* UART7_RX */ + , /* UART7_CTS */ + ; /* UART7_RTS */ + bias-disable; + }; + }; + + uart7_pins_b: uart7-1 { + pins1 { + pinmux = ; /* UART7_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* UART7_RX */ + bias-disable; + }; + }; + + uart7_pins_c: uart7-2 { + pins1 { + pinmux = ; /* UART7_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* UART7_RX */ + bias-disable; + }; + }; + + uart7_idle_pins_c: uart7-idle-2 { + pins1 { + pinmux = ; /* UART7_TX */ + }; + pins2 { + pinmux = ; /* UART7_RX */ + bias-disable; + }; + }; + + uart7_sleep_pins_c: uart7-sleep-2 { + pins { + pinmux = , /* UART7_TX */ + ; /* UART7_RX */ + }; + }; + + uart8_pins_a: uart8-0 { + pins1 { + pinmux = ; /* UART8_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* UART8_RX */ + bias-disable; + }; + }; + usart2_pins_a: usart2-0 { pins1 { pinmux = , /* USART2_TX */ @@ -1628,6 +1769,42 @@ }; }; + usart2_pins_c: usart2-2 { + pins1 { + pinmux = , /* USART2_TX */ + ; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = , /* USART2_RX */ + ; /* USART2_CTS_NSS */ + bias-disable; + }; + }; + + usart2_idle_pins_c: usart2-idle-2 { + pins1 { + pinmux = , /* USART2_TX */ + , /* USART2_RTS */ + ; /* USART2_CTS_NSS */ + }; + pins2 { + pinmux = ; /* USART2_RX */ + bias-disable; + }; + }; + + usart2_sleep_pins_c: usart2-sleep-2 { + pins { + pinmux = , /* USART2_TX */ + , /* USART2_RTS */ + , /* USART2_RX */ + ; /* USART2_CTS_NSS */ + }; + }; + usart3_pins_a: usart3-0 { pins1 { pinmux = ; /* USART3_TX */ @@ -1641,6 +1818,78 @@ }; }; + usart3_pins_b: usart3-1 { + pins1 { + pinmux = , /* USART3_TX */ + ; /* USART3_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = , /* USART3_RX */ + ; /* USART3_CTS_NSS */ + bias-disable; + }; + }; + + usart3_idle_pins_b: usart3-idle-1 { + pins1 { + pinmux = , /* USART3_TX */ + , /* USART3_RTS */ + ; /* USART3_CTS_NSS */ + }; + pins2 { + pinmux = ; /* USART3_RX */ + bias-disable; + }; + }; + + usart3_sleep_pins_b: usart3-sleep-1 { + pins { + pinmux = , /* USART3_TX */ + , /* USART3_RTS */ + , /* USART3_CTS_NSS */ + ; /* USART3_RX */ + }; + }; + + usart3_pins_c: usart3-2 { + pins1 { + pinmux = , /* USART3_TX */ + ; /* USART3_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = , /* USART3_RX */ + ; /* USART3_CTS_NSS */ + bias-disable; + }; + }; + + usart3_idle_pins_c: usart3-idle-2 { + pins1 { + pinmux = , /* USART3_TX */ + , /* USART3_RTS */ + ; /* USART3_CTS_NSS */ + }; + pins2 { + pinmux = ; /* USART3_RX */ + bias-disable; + }; + }; + + usart3_sleep_pins_c: usart3-sleep-2 { + pins { + pinmux = , /* USART3_TX */ + , /* USART3_RTS */ + , /* USART3_CTS_NSS */ + ; /* USART3_RX */ + }; + }; + uart4_pins_a: uart4-0 { pins1 { pinmux = ; /* UART4_TX */ @@ -1782,18 +2031,4 @@ bias-disable; }; }; - - spi4_pins_a: spi4-0 { - pins { - pinmux = , /* SPI4_SCK */ - ; /* SPI4_MOSI */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - pins2 { - pinmux = ; /* SPI4_MISO */ - bias-disable; - }; - }; }; diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi index 39d9e545ed..206d3d3c78 100644 --- a/arch/arm/dts/stm32mp151.dtsi +++ b/arch/arm/dts/stm32mp151.dtsi @@ -1153,7 +1153,7 @@ }; pwr_mcu: pwr_mcu@50001014 { - compatible = "syscon"; + compatible = "st,stm32mp151-pwr-mcu", "syscon"; reg = <0x50001014 0x4>; }; @@ -1372,6 +1372,8 @@ dma-names = "tx", "rx"; clocks = <&rcc QSPI_K>; resets = <&rcc QSPI_R>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; diff --git a/arch/arm/dts/stm32mp157a-dk1.dts b/arch/arm/dts/stm32mp157a-dk1.dts index d03d4cd260..4c8be9c8eb 100644 --- a/arch/arm/dts/stm32mp157a-dk1.dts +++ b/arch/arm/dts/stm32mp157a-dk1.dts @@ -18,6 +18,8 @@ aliases { ethernet0 = ðernet0; serial0 = &uart4; + serial1 = &usart3; + serial2 = &uart7; }; chosen { diff --git a/arch/arm/dts/stm32mp157c-dk2.dts b/arch/arm/dts/stm32mp157c-dk2.dts index 9a8a26710a..045636555d 100644 --- a/arch/arm/dts/stm32mp157c-dk2.dts +++ b/arch/arm/dts/stm32mp157c-dk2.dts @@ -19,6 +19,9 @@ aliases { ethernet0 = ðernet0; serial0 = &uart4; + serial1 = &usart3; + serial2 = &uart7; + serial3 = &usart2; }; chosen { @@ -84,3 +87,11 @@ }; }; }; + +&usart2 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart2_pins_c>; + pinctrl-1 = <&usart2_sleep_pins_c>; + pinctrl-2 = <&usart2_idle_pins_c>; + status = "disabled"; +}; diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts index 072d646379..dd911c9932 100644 --- a/arch/arm/dts/stm32mp157c-ed1.dts +++ b/arch/arm/dts/stm32mp157c-ed1.dts @@ -361,8 +361,10 @@ }; &uart4 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep", "idle"; pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; status = "okay"; }; diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts index 46f81ce92e..a55e80ce26 100644 --- a/arch/arm/dts/stm32mp157c-ev1.dts +++ b/arch/arm/dts/stm32mp157c-ev1.dts @@ -19,6 +19,7 @@ aliases { serial0 = &uart4; + serial1 = &usart3; ethernet0 = ðernet0; }; @@ -343,6 +344,20 @@ }; }; +&usart3 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart3_pins_b>; + pinctrl-1 = <&usart3_sleep_pins_b>; + pinctrl-2 = <&usart3_idle_pins_b>; + /* + * HW flow control USART3_RTS is optional, and isn't default wired to + * the connector. SB23 needs to be soldered in order to use it, and R77 + * (ETH_CLK) should be removed. + */ + uart-has-rtscts; + status = "disabled"; +}; + &usbh_ehci { phys = <&usbphyc_port0>; status = "okay"; diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi index d660dfb74e..aa4aa83e05 100644 --- a/arch/arm/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi @@ -62,7 +62,7 @@ led { compatible = "gpio-leds"; - blue { + led-blue { label = "heartbeat"; gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; @@ -391,6 +391,19 @@ }; }; +&i2c5 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_pins_a>; + pinctrl-1 = <&i2c5_sleep_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + clock-frequency = <400000>; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; +}; + &i2s2 { clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>; clock-names = "pclk", "i2sclk", "x8k", "x11k"; @@ -610,20 +623,39 @@ }; &uart4 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep", "idle"; pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; status = "okay"; }; +&uart7 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart7_pins_c>; + pinctrl-1 = <&uart7_sleep_pins_c>; + pinctrl-2 = <&uart7_idle_pins_c>; + status = "disabled"; +}; + +&usart3 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart3_pins_c>; + pinctrl-1 = <&usart3_sleep_pins_c>; + pinctrl-2 = <&usart3_idle_pins_c>; + uart-has-rtscts; + status = "disabled"; +}; + &usbh_ehci { phys = <&usbphyc_port0>; status = "okay"; }; &usbotg_hs { - dr_mode = "peripheral"; phys = <&usbphyc_port1 0>; phy-names = "usb2-phy"; + usb-role-switch; status = "okay"; };