From: Jagannadha Sutradharudu Teki <jagannadha.sutradharudu-teki@xilinx.com>
Date: Wed, 8 Jan 2014 20:18:08 +0000 (+0530)
Subject: zynq: Add UART0, UART1 configs support
X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=625d7637513a41045e47b7ccd36185f0e4c1df26;p=u-boot.git

zynq: Add UART0, UART1 configs support

Zynq uart controller support two serial ports like
CONFIG_ZYNQ_SERIAL_UART0 and CONFIG_ZYNQ_SERIAL_UART1
enabled both so-that the respective board will define
these macros based on their usage.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
---

diff --git a/include/configs/zynq.h b/include/configs/zynq.h
index 6e545e5d4b..f1045589e8 100644
--- a/include/configs/zynq.h
+++ b/include/configs/zynq.h
@@ -33,10 +33,22 @@
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
 /* Zynq Serial driver */
-#define CONFIG_ZYNQ_SERIAL
-#define CONFIG_ZYNQ_SERIAL_BASEADDR0	0xE0001000
-#define CONFIG_ZYNQ_SERIAL_BAUDRATE0	CONFIG_BAUDRATE
-#define CONFIG_ZYNQ_SERIAL_CLOCK0	50000000
+#define CONFIG_ZYNQ_SERIAL_UART1
+#ifdef CONFIG_ZYNQ_SERIAL_UART0
+# define CONFIG_ZYNQ_SERIAL_BASEADDR0	0xE0000000
+# define CONFIG_ZYNQ_SERIAL_BAUDRATE0	CONFIG_BAUDRATE
+# define CONFIG_ZYNQ_SERIAL_CLOCK0	50000000
+#endif
+
+#ifdef CONFIG_ZYNQ_SERIAL_UART1
+# define CONFIG_ZYNQ_SERIAL_BASEADDR1	0xE0001000
+# define CONFIG_ZYNQ_SERIAL_BAUDRATE1	CONFIG_BAUDRATE
+# define CONFIG_ZYNQ_SERIAL_CLOCK1	50000000
+#endif
+
+#if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1)
+# define CONFIG_ZYNQ_SERIAL
+#endif
 
 /* DCC driver */
 #if defined(CONFIG_ZYNQ_DCC)