From: Simon Glass Date: Wed, 27 May 2020 12:58:47 +0000 (-0600) Subject: x86: spi: Rewrite logic for obtaining the SPI memory map X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=609b90a6a9c0da42c4e52cd519bfd546367fa880;p=u-boot.git x86: spi: Rewrite logic for obtaining the SPI memory map At present this logic does not work on link and samus, since their SPI controller is not a PCI device, but a child of the PCH. Unfortunately, fixing this involves a lot of extra logic. Still, this was requested in the review of the fix-up patch, so here it is. Fixes: 92842147c31 ("spi: ich: Add support for get_mmap() method") Signed-off-by: Simon Glass Reviewed-by: Bin Meng Tested-by: Bin Meng (on Intel minnowmax) --- diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c index 7405062846..e1336b89c5 100644 --- a/drivers/spi/ich.c +++ b/drivers/spi/ich.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -614,15 +615,94 @@ static int ich_spi_exec_op(struct spi_slave *slave, const struct spi_mem_op *op) return ret; } +/** + * ich_spi_get_basics() - Get basic information about the ICH device + * + * This works without probing any devices if requested. + * + * @bus: SPI controller to use + * @can_probe: true if this function is allowed to probe the PCH + * @pchp: Returns a pointer to the pch, or NULL if not found + * @ich_versionp: Returns ICH version detected on success + * @mmio_basep: Returns the address of the SPI registers on success + * @return 0 if OK, -EPROTOTYPE if the PCH could not be found, -EAGAIN if + * the function cannot success without probing, possible another error if + * pch_get_spi_base() fails + */ +static int ich_spi_get_basics(struct udevice *bus, bool can_probe, + struct udevice **pchp, + enum ich_version *ich_versionp, ulong *mmio_basep) +{ + struct udevice *pch = NULL; + int ret = 0; + + /* Find a PCH if there is one */ + if (can_probe) { + pch = dev_get_parent(bus); + if (device_get_uclass_id(pch) != UCLASS_PCH) { + uclass_first_device(UCLASS_PCH, &pch); + if (!pch) + return log_msg_ret("uclass", -EPROTOTYPE); + } + } + + *ich_versionp = dev_get_driver_data(bus); + if (*ich_versionp == ICHV_APL) + *mmio_basep = dm_pci_read_bar32(bus, 0); + else if (pch) + ret = pch_get_spi_base(pch, mmio_basep); + else + return -EAGAIN; + *pchp = pch; + + return ret; +} + +/** + * ich_get_mmap_bus() - Handle the get_mmap() method for a bus + * + * There are several cases to consider: + * 1. Using of-platdata, in which case we have the BDF and can access the + * registers by reading the BAR + * 2. Not using of-platdata, but still with a SPI controller that is on its own + * PCI PDF. In this case we read the BDF from the parent platdata and again get + * the registers by reading the BAR + * 3. Using a SPI controller that is a child of the PCH, in which case we try + * to find the registers by asking the PCH. This only works if the PCH has + * been probed (which it will be if the bus is probed since parents are + * probed before children), since the PCH may not have a PCI address until + * its parent (the PCI bus itself) has been probed. If you are using this + * method then you should make sure the SPI bus is probed. + * + * The first two cases are useful in early init. The last one is more useful + * afterwards. + */ static int ich_get_mmap_bus(struct udevice *bus, ulong *map_basep, uint *map_sizep, uint *offsetp) { pci_dev_t spi_bdf; - #if !CONFIG_IS_ENABLED(OF_PLATDATA) - struct pci_child_platdata *pplat = dev_get_parent_platdata(bus); + if (device_is_on_pci_bus(bus)) { + struct pci_child_platdata *pplat; + + pplat = dev_get_parent_platdata(bus); + spi_bdf = pplat->devfn; + } else { + enum ich_version ich_version; + struct fast_spi_regs *regs; + struct udevice *pch; + ulong mmio_base; + int ret; - spi_bdf = pplat->devfn; + ret = ich_spi_get_basics(bus, device_active(bus), &pch, + &ich_version, &mmio_base); + if (ret) + return log_msg_ret("basics", ret); + regs = (struct fast_spi_regs *)mmio_base; + + return fast_spi_get_bios_mmap_regs(regs, map_basep, map_sizep, + offsetp); + } #else struct ich_spi_platdata *plat = dev_get_platdata(bus); @@ -866,23 +946,16 @@ static int ich_spi_child_pre_probe(struct udevice *dev) static int ich_spi_ofdata_to_platdata(struct udevice *dev) { struct ich_spi_platdata *plat = dev_get_platdata(dev); + int ret; #if !CONFIG_IS_ENABLED(OF_PLATDATA) struct ich_spi_priv *priv = dev_get_priv(dev); - /* Find a PCH if there is one */ - uclass_first_device(UCLASS_PCH, &priv->pch); - if (!priv->pch) - priv->pch = dev_get_parent(dev); - - plat->ich_version = dev_get_driver_data(dev); + ret = ich_spi_get_basics(dev, true, &priv->pch, &plat->ich_version, + &plat->mmio_base); + if (ret) + return log_msg_ret("basics", ret); plat->lockdown = dev_read_bool(dev, "intel,spi-lock-down"); - if (plat->ich_version == ICHV_APL) { - plat->mmio_base = dm_pci_read_bar32(dev, 0); - } else { - /* SBASE is similar */ - pch_get_spi_base(priv->pch, &plat->mmio_base); - } /* * Use an int so that the property is present in of-platdata even * when false.