From: Simon Glass <sjg@chromium.org>
Date: Thu, 28 Feb 2013 19:26:10 +0000 (+0000)
Subject: x86: Add function to get top of usable ram
X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=5e98947f9baa5bdc9b819d365f9f8ef65a9b1e4d;p=u-boot.git

x86: Add function to get top of usable ram

The memory layout calculations are done in calculate_relocation_address(),
and coreboot has its own version of this function. But in fact all we
really need is to set the top of usable RAM, and then the base version
will work as is.

So instead of allowing the whole calculate_relocation_address() function
to be replaced, create board_get_usable_ram_top() which can be used by
a board to specify the top of the area where U-Boot relocations to.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

diff --git a/arch/x86/cpu/coreboot/sdram.c b/arch/x86/cpu/coreboot/sdram.c
index 76274cb88e..a8136a06ab 100644
--- a/arch/x86/cpu/coreboot/sdram.c
+++ b/arch/x86/cpu/coreboot/sdram.c
@@ -60,12 +60,8 @@ unsigned install_e820_map(unsigned max_entries, struct e820entry *entries)
  * address, and how far U-Boot is moved by relocation are set in the global
  * data structure.
  */
-int calculate_relocation_address(void)
+ulong board_get_usable_ram_top(ulong total_size)
 {
-	const uint64_t uboot_size = (uintptr_t)&__bss_end -
-			(uintptr_t)&__text_start;
-	const uint64_t total_size = uboot_size + CONFIG_SYS_MALLOC_LEN +
-		CONFIG_SYS_STACK_SIZE;
 	uintptr_t dest_addr = 0;
 	int i;
 
@@ -87,21 +83,15 @@ int calculate_relocation_address(void)
 			continue;
 
 		/* Use this address if it's the largest so far. */
-		if (end - uboot_size > dest_addr)
+		if (end > dest_addr)
 			dest_addr = end;
 	}
 
 	/* If no suitable area was found, return an error. */
 	if (!dest_addr)
-		return 1;
+		panic("No available memory found for relocation");
 
-	dest_addr -= uboot_size;
-	dest_addr &= ~((1 << 12) - 1);
-	gd->relocaddr = dest_addr;
-	gd->reloc_off = dest_addr - (uintptr_t)&__text_start;
-	gd->start_addr_sp = dest_addr - CONFIG_SYS_MALLOC_LEN;
-
-	return 0;
+	return (ulong)dest_addr;
 }
 
 int dram_init_f(void)
diff --git a/arch/x86/lib/init_helpers.c b/arch/x86/lib/init_helpers.c
index 3eec9a61d6..1a097f101c 100644
--- a/arch/x86/lib/init_helpers.c
+++ b/arch/x86/lib/init_helpers.c
@@ -73,26 +73,34 @@ int init_baudrate_f(void)
 	return 0;
 }
 
-__weak int calculate_relocation_address(void)
+/* Get the top of usable RAM */
+__weak ulong board_get_usable_ram_top(ulong total_size)
 {
-	ulong text_start = (ulong)&__text_start;
-	ulong bss_end = (ulong)&__bss_end;
+	return gd->ram_size;
+}
+
+int calculate_relocation_address(void)
+{
+	const ulong uboot_size = (uintptr_t)&__bss_end -
+			(uintptr_t)&__text_start;
+	ulong total_size;
 	ulong dest_addr;
 
+	total_size = ALIGN(uboot_size, 1 << 12) + CONFIG_SYS_MALLOC_LEN +
+		CONFIG_SYS_STACK_SIZE;
+
 	/*
 	 * NOTE: All destination address are rounded down to 16-byte
 	 *       boundary to satisfy various worst-case alignment
 	 *       requirements
 	 */
+	dest_addr = board_get_usable_ram_top(total_size);
 
-	/* Stack is at top of available memory */
-	dest_addr = gd->ram_size;
-
-	/* U-Boot is at the top */
-	dest_addr -= (bss_end - text_start);
-	dest_addr &= ~15;
+	/* U-Boot is below the FDT */
+	dest_addr -= uboot_size;
+	dest_addr &= ~((1 << 12) - 1);
 	gd->relocaddr = dest_addr;
-	gd->reloc_off = (dest_addr - text_start);
+	gd->reloc_off = dest_addr - (uintptr_t)&__text_start;
 
 	/* Stack is at the bottom, so it can grow down */
 	gd->start_addr_sp = dest_addr - CONFIG_SYS_MALLOC_LEN;