From: Marek Vasut Date: Sun, 2 Aug 2015 17:42:26 +0000 (+0200) Subject: ddr: altera: sequencer: Clean data types X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=5ded7320c8ba99fc413cb5dc3591f26e052986c3;p=u-boot.git ddr: altera: sequencer: Clean data types Replace uintNN_t with uNN. No functional change. Signed-off-by: Marek Vasut Acked-by: Dinh Nguyen --- diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c index e6cc12ea54..f2d164a035 100644 --- a/drivers/ddr/altera/sequencer.c +++ b/drivers/ddr/altera/sequencer.c @@ -60,7 +60,7 @@ const struct socfpga_sdram_misc_config *misccfg; STATIC_SKIP_DELAY_LOOPS) /* calibration steps requested by the rtl */ -uint16_t dyn_calib_steps; +u16 dyn_calib_steps; /* * To make CALIB_SKIP_DELAY_LOOPS a dynamic conditional option @@ -71,7 +71,7 @@ uint16_t dyn_calib_steps; * zero when skipping */ -uint16_t skip_delay_mask; /* mask off bits when skipping/not-skipping */ +u16 skip_delay_mask; /* mask off bits when skipping/not-skipping */ #define SKIP_DELAY_LOOP_VALUE_OR_ZERO(non_skip_value) \ ((non_skip_value) & skip_delay_mask) @@ -79,8 +79,8 @@ uint16_t skip_delay_mask; /* mask off bits when skipping/not-skipping */ struct gbl_type *gbl; struct param_type *param; -static void set_failing_group_stage(uint32_t group, uint32_t stage, - uint32_t substage) +static void set_failing_group_stage(u32 group, u32 stage, + u32 substage) { /* * Only set the global stage if there was not been any other @@ -286,49 +286,49 @@ static void scc_mgr_initialize(void) } } -static void scc_mgr_set_dqdqs_output_phase(uint32_t write_group, uint32_t phase) +static void scc_mgr_set_dqdqs_output_phase(u32 write_group, u32 phase) { scc_mgr_set(SCC_MGR_DQDQS_OUT_PHASE_OFFSET, write_group, phase); } -static void scc_mgr_set_dqs_bus_in_delay(uint32_t read_group, uint32_t delay) +static void scc_mgr_set_dqs_bus_in_delay(u32 read_group, u32 delay) { scc_mgr_set(SCC_MGR_DQS_IN_DELAY_OFFSET, read_group, delay); } -static void scc_mgr_set_dqs_en_phase(uint32_t read_group, uint32_t phase) +static void scc_mgr_set_dqs_en_phase(u32 read_group, u32 phase) { scc_mgr_set(SCC_MGR_DQS_EN_PHASE_OFFSET, read_group, phase); } -static void scc_mgr_set_dqs_en_delay(uint32_t read_group, uint32_t delay) +static void scc_mgr_set_dqs_en_delay(u32 read_group, u32 delay) { scc_mgr_set(SCC_MGR_DQS_EN_DELAY_OFFSET, read_group, delay); } -static void scc_mgr_set_dqs_io_in_delay(uint32_t delay) +static void scc_mgr_set_dqs_io_in_delay(u32 delay) { scc_mgr_set(SCC_MGR_IO_IN_DELAY_OFFSET, rwcfg->mem_dq_per_write_dqs, delay); } -static void scc_mgr_set_dq_in_delay(uint32_t dq_in_group, uint32_t delay) +static void scc_mgr_set_dq_in_delay(u32 dq_in_group, u32 delay) { scc_mgr_set(SCC_MGR_IO_IN_DELAY_OFFSET, dq_in_group, delay); } -static void scc_mgr_set_dq_out1_delay(uint32_t dq_in_group, uint32_t delay) +static void scc_mgr_set_dq_out1_delay(u32 dq_in_group, u32 delay) { scc_mgr_set(SCC_MGR_IO_OUT1_DELAY_OFFSET, dq_in_group, delay); } -static void scc_mgr_set_dqs_out1_delay(uint32_t delay) +static void scc_mgr_set_dqs_out1_delay(u32 delay) { scc_mgr_set(SCC_MGR_IO_OUT1_DELAY_OFFSET, rwcfg->mem_dq_per_write_dqs, delay); } -static void scc_mgr_set_dm_out1_delay(uint32_t dm, uint32_t delay) +static void scc_mgr_set_dm_out1_delay(u32 dm, u32 delay) { scc_mgr_set(SCC_MGR_IO_OUT1_DELAY_OFFSET, rwcfg->mem_dq_per_write_dqs + 1 + dm, @@ -336,7 +336,7 @@ static void scc_mgr_set_dm_out1_delay(uint32_t dm, uint32_t delay) } /* load up dqs config settings */ -static void scc_mgr_load_dqs(uint32_t dqs) +static void scc_mgr_load_dqs(u32 dqs) { writel(dqs, &sdr_scc_mgr->dqs_ena); } @@ -348,13 +348,13 @@ static void scc_mgr_load_dqs_io(void) } /* load up dq config settings */ -static void scc_mgr_load_dq(uint32_t dq_in_group) +static void scc_mgr_load_dq(u32 dq_in_group) { writel(dq_in_group, &sdr_scc_mgr->dq_ena); } /* load up dm config settings */ -static void scc_mgr_load_dm(uint32_t dm) +static void scc_mgr_load_dm(u32 dm) { writel(dm, &sdr_scc_mgr->dm_ena); } @@ -399,8 +399,8 @@ static void scc_mgr_set_dqs_en_phase_all_ranks(u32 read_group, u32 phase) read_group, phase, 0); } -static void scc_mgr_set_dqdqs_output_phase_all_ranks(uint32_t write_group, - uint32_t phase) +static void scc_mgr_set_dqdqs_output_phase_all_ranks(u32 write_group, + u32 phase) { /* * USER although the h/w doesn't support different phases per @@ -414,8 +414,8 @@ static void scc_mgr_set_dqdqs_output_phase_all_ranks(uint32_t write_group, write_group, phase, 0); } -static void scc_mgr_set_dqs_en_delay_all_ranks(uint32_t read_group, - uint32_t delay) +static void scc_mgr_set_dqs_en_delay_all_ranks(u32 read_group, + u32 delay) { /* * In shadow register mode, the T11 settings are stored in @@ -615,9 +615,9 @@ static void scc_mgr_zero_group(const u32 write_group, const int out_only) * apply and load a particular input delay for the DQ pins in a group * group_bgn is the index of the first dq pin (in the write group) */ -static void scc_mgr_apply_group_dq_in_delay(uint32_t group_bgn, uint32_t delay) +static void scc_mgr_apply_group_dq_in_delay(u32 group_bgn, u32 delay) { - uint32_t i, p; + u32 i, p; for (i = 0, p = group_bgn; i < rwcfg->mem_dq_per_read_dqs; i++, p++) { scc_mgr_set_dq_in_delay(p, delay); @@ -642,9 +642,9 @@ static void scc_mgr_apply_group_dq_out1_delay(const u32 delay) } /* apply and load a particular output delay for the DM pins in a group */ -static void scc_mgr_apply_group_dm_out1_delay(uint32_t delay1) +static void scc_mgr_apply_group_dm_out1_delay(u32 delay1) { - uint32_t i; + u32 i; for (i = 0; i < RW_MGR_NUM_DM_PER_WRITE_GROUP; i++) { scc_mgr_set_dm_out1_delay(i, delay1); @@ -654,8 +654,8 @@ static void scc_mgr_apply_group_dm_out1_delay(uint32_t delay1) /* apply and load delay on both DQS and OCT out1 */ -static void scc_mgr_apply_group_dqs_io_and_oct_out1(uint32_t write_group, - uint32_t delay) +static void scc_mgr_apply_group_dqs_io_and_oct_out1(u32 write_group, + u32 delay) { scc_mgr_set_dqs_out1_delay(delay); scc_mgr_load_dqs_io(); @@ -840,7 +840,7 @@ static void delay_for_n_mem_clocks(const u32 clocks) */ static void rw_mgr_mem_init_load_regs(u32 cntr0, u32 cntr1, u32 cntr2, u32 jump) { - uint32_t grpaddr = SDR_PHYGRP_RWMGRGRP_ADDRESS | + u32 grpaddr = SDR_PHYGRP_RWMGRGRP_ADDRESS | RW_MGR_RUN_SINGLE_GROUP_OFFSET; /* Load counters */ @@ -2147,7 +2147,7 @@ static int search_right_edge(const int write, const int rank_bgn, } else { /* READ-ONLY */ scc_mgr_set_dqs_bus_in_delay(read_group, d + start_dqs); if (iocfg->shift_dqs_en_when_shift_dqs) { - uint32_t delay = d + start_dqs_en; + u32 delay = d + start_dqs_en; if (delay > iocfg->dqs_en_delay_max) delay = iocfg->dqs_en_delay_max; scc_mgr_set_dqs_en_delay(read_group, delay); @@ -2381,7 +2381,7 @@ static int rw_mgr_mem_calibrate_vfifo_center(const u32 rank_bgn, * Store these as signed since there are comparisons with * signed numbers. */ - uint32_t sticky_bit_chk; + u32 sticky_bit_chk; int32_t left_edge[rwcfg->mem_dq_per_read_dqs]; int32_t right_edge[rwcfg->mem_dq_per_read_dqs]; int32_t orig_mid_min, mid_min; @@ -2665,9 +2665,9 @@ rw_mgr_mem_calibrate_dq_dqs_centering(const u32 rw_group, const u32 test_bgn, */ static int rw_mgr_mem_calibrate_vfifo(const u32 rw_group, const u32 test_bgn) { - uint32_t p, d; - uint32_t dtaps_per_ptap; - uint32_t failed_substage; + u32 p, d; + u32 dtaps_per_ptap; + u32 failed_substage; int ret; @@ -2783,7 +2783,7 @@ static int rw_mgr_mem_calibrate_vfifo_end(const u32 rw_group, * detail in Altera EMI_RM 2015.05.04 , "UniPHY Calibration Stages". * Calibrate LFIFO to find smallest read latency. */ -static uint32_t rw_mgr_mem_calibrate_lfifo(void) +static u32 rw_mgr_mem_calibrate_lfifo(void) { int found_one = 0; @@ -3193,8 +3193,8 @@ static void mem_init_latency(void) */ static void mem_skip_calibrate(void) { - uint32_t vfifo_offset; - uint32_t i, j, r; + u32 vfifo_offset; + u32 i, j, r; debug("%s:%d\n", __func__, __LINE__); /* Need to update every shadow register set used by the interface */ @@ -3279,15 +3279,15 @@ static void mem_skip_calibrate(void) * * Perform memory calibration. */ -static uint32_t mem_calibrate(void) +static u32 mem_calibrate(void) { - uint32_t i; - uint32_t rank_bgn, sr; - uint32_t write_group, write_test_bgn; - uint32_t read_group, read_test_bgn; - uint32_t run_groups, current_run; - uint32_t failing_groups = 0; - uint32_t group_failed = 0; + u32 i; + u32 rank_bgn, sr; + u32 write_group, write_test_bgn; + u32 read_group, read_test_bgn; + u32 run_groups, current_run; + u32 failing_groups = 0; + u32 group_failed = 0; const u32 rwdqs_ratio = rwcfg->mem_if_read_dqs_width / rwcfg->mem_if_write_dqs_width; @@ -3506,7 +3506,7 @@ static int run_mem_calibrate(void) */ static void debug_mem_calibrate(int pass) { - uint32_t debug_info; + u32 debug_info; if (pass) { printf("%s: CALIBRATION PASSED\n", __FILE__); @@ -3594,13 +3594,13 @@ static void initialize_reg_file(void) */ static void initialize_hps_phy(void) { - uint32_t reg; + u32 reg; /* * Tracking also gets configured here because it's in the * same register. */ - uint32_t trk_sample_count = 7500; - uint32_t trk_long_idle_sample_count = (10 << 16) | 100; + u32 trk_sample_count = 7500; + u32 trk_long_idle_sample_count = (10 << 16) | 100; /* * Format is number of outer loops in the 16 MSB, sample * count in 16 LSB. @@ -3684,7 +3684,7 @@ int sdram_calibration_full(void) { struct param_type my_param; struct gbl_type my_gbl; - uint32_t pass; + u32 pass; memset(&my_param, 0, sizeof(my_param)); memset(&my_gbl, 0, sizeof(my_gbl));