From: Aditya Prayoga <aditya@kobol.io>
Date: Tue, 4 Dec 2018 16:57:25 +0000 (+0800)
Subject: arm: mvebu: helios4: Reset uSOM onboard phy during board init
X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=5ca84c6dd2b3060471171cce3f76d8af35060c0b;p=u-boot.git

arm: mvebu: helios4: Reset uSOM onboard phy during board init

Similar to Clearfog rev 2.1, GPIO 19 also used to reset onboard ethernet
PHY.

This patch depend on
net: mvneta: Add GPIO configuration support
[URL: https://patchwork.ozlabs.org/patch/1007736/]

Signed-off-by: Aditya Prayoga <aditya@kobol.io>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-By: Dennis Gilmore <dgilmore@redhat.com>
Reviewed-By: Dennis Gilmore <dgilmore@redhat.com>
Signed-off-by: Stefan Roese <sr@denx.de>
---

diff --git a/arch/arm/dts/armada-388-helios4-u-boot.dtsi b/arch/arm/dts/armada-388-helios4-u-boot.dtsi
index 4bc00aec10..4b20610d83 100644
--- a/arch/arm/dts/armada-388-helios4-u-boot.dtsi
+++ b/arch/arm/dts/armada-388-helios4-u-boot.dtsi
@@ -8,6 +8,10 @@
 	};
 };
 
+&eth0 {
+	phy-reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+};
+
 &spi1 {
 	u-boot,dm-spl;
 };