From: Andre Przywara Date: Wed, 8 Jun 2022 13:56:56 +0000 (+0100) Subject: sunxi: remove CONFIG_MACPWR X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=5ad98c57b8dc465b7d1534203b75dc2b35440457;p=u-boot.git sunxi: remove CONFIG_MACPWR The CONFIG_MACPWR Kconfig symbol is used to point to a GPIO that enables the power for the Ethernet "MAC" (mostly PHY, really). In the DT this is described with the phy-supply property in the MAC DT node, pointing to a (GPIO controlled) regulator. Since we need Ethernet only in U-Boot proper, and use a DM driver there, we should use the DT instead of hardcoding this. Add code to the sun8i_emac and sunxi_emac drivers to check the DT for that regulator and enable it, at probe time. Then drop the current code from board.c, which was doing that job before. This allows us to remove the MACPWR Kconfig definition and the respective values from the defconfigs. Signed-off-by: Andre Przywara Reviewed-by: Sam Edwards --- diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 1b24dfe4dd..d3ed62add9 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -695,13 +695,6 @@ config OLD_SUNXI_KERNEL_COMPAT Set this to enable various workarounds for old kernels, this results in sub-optimal settings for newer kernels, only enable if needed. -config MACPWR - string "MAC power pin" - default "" - help - Set the pin used to power the MAC. This takes a string in the format - understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. - config MMC1_PINS_PH bool "Pins for mmc1 are on Port H" depends on MACH_SUN4I || MACH_SUN7I || MACH_SUN8I_R40 diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 50a60e760d..5cfb33468e 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -187,7 +187,7 @@ enum env_location env_get_location(enum env_operation op, int prio) /* add board specific code here */ int board_init(void) { - __maybe_unused int id_pfr1, ret, macpwr_pin; + __maybe_unused int id_pfr1, ret; gd->bd->bi_boot_params = (PHYS_SDRAM_0 + 0x100); @@ -224,15 +224,6 @@ int board_init(void) if (ret) return ret; - /* strcmp() would look better, but doesn't get optimised away. */ - if (CONFIG_MACPWR[0]) { - macpwr_pin = sunxi_name_to_gpio(CONFIG_MACPWR); - if (macpwr_pin >= 0) { - gpio_request(macpwr_pin, "macpwr"); - gpio_direction_output(macpwr_pin, 1); - } - } - #if CONFIG_IS_ENABLED(DM_I2C) /* * Temporary workaround for enabling I2C clocks until proper sunxi DM @@ -240,7 +231,6 @@ int board_init(void) */ i2c_init_board(); #endif - eth_init_board(); return 0; diff --git a/configs/Bananapi_M2_Ultra_defconfig b/configs/Bananapi_M2_Ultra_defconfig index a5fe76af56..2cc7bbbd8b 100644 --- a/configs/Bananapi_M2_Ultra_defconfig +++ b/configs/Bananapi_M2_Ultra_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-r40-bananapi-m2-ultra" CONFIG_SPL=y CONFIG_MACH_SUN8I_R40=y CONFIG_DRAM_CLK=576 -CONFIG_MACPWR="PA17" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB1_VBUS_PIN="PH23" CONFIG_USB2_VBUS_PIN="PH23" diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig index 6c2a1f630e..f4910ba13a 100644 --- a/configs/Bananapi_defconfig +++ b/configs/Bananapi_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 -CONFIG_MACPWR="PH23" CONFIG_VIDEO_COMPOSITE=y CONFIG_GMAC_TX_DELAY=3 CONFIG_AHCI=y diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig index 94fd74754e..02be8971df 100644 --- a/configs/Bananapro_defconfig +++ b/configs/Bananapro_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 -CONFIG_MACPWR="PH23" CONFIG_USB1_VBUS_PIN="PH0" CONFIG_USB2_VBUS_PIN="PH1" CONFIG_VIDEO_COMPOSITE=y diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig index 9639cb6aad..66f57ab3c8 100644 --- a/configs/Lamobo_R1_defconfig +++ b/configs/Lamobo_R1_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 -CONFIG_MACPWR="PH23" CONFIG_GMAC_TX_DELAY=4 CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig index f5b6d908cd..9ac2e4839d 100644 --- a/configs/Mele_A1000_defconfig +++ b/configs/Mele_A1000_defconfig @@ -3,7 +3,6 @@ CONFIG_ARCH_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000" CONFIG_SPL=y CONFIG_MACH_SUN4I=y -CONFIG_MACPWR="PH15" CONFIG_VIDEO_VGA=y CONFIG_VIDEO_COMPOSITE=y CONFIG_AHCI=y diff --git a/configs/Orangepi_defconfig b/configs/Orangepi_defconfig index c89a9a1f9d..53edf525ec 100644 --- a/configs/Orangepi_defconfig +++ b/configs/Orangepi_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 -CONFIG_MACPWR="PH23" CONFIG_USB1_VBUS_PIN="PH26" CONFIG_USB2_VBUS_PIN="PH22" CONFIG_VIDEO_VGA=y diff --git a/configs/Orangepi_mini_defconfig b/configs/Orangepi_mini_defconfig index fe9ce808a1..ccf3267017 100644 --- a/configs/Orangepi_mini_defconfig +++ b/configs/Orangepi_mini_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi-mini" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 -CONFIG_MACPWR="PH23" CONFIG_MMC_SUNXI_SLOT_EXTRA=3 CONFIG_USB1_VBUS_PIN="PH26" CONFIG_USB2_VBUS_PIN="PH22" diff --git a/configs/bananapi_m1_plus_defconfig b/configs/bananapi_m1_plus_defconfig index 0fbb619d62..a432a01f6b 100644 --- a/configs/bananapi_m1_plus_defconfig +++ b/configs/bananapi_m1_plus_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi-m1-plus" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=432 -CONFIG_MACPWR="PH23" CONFIG_VIDEO_COMPOSITE=y CONFIG_GMAC_TX_DELAY=3 CONFIG_AHCI=y diff --git a/configs/bananapi_m2_plus_h3_defconfig b/configs/bananapi_m2_plus_h3_defconfig index 26ced59fb0..a8f9b5044b 100644 --- a/configs/bananapi_m2_plus_h3_defconfig +++ b/configs/bananapi_m2_plus_h3_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-bananapi-m2-plus" CONFIG_SPL=y CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=672 -CONFIG_MACPWR="PD6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SUN8I_EMAC=y diff --git a/configs/bananapi_m2_plus_h5_defconfig b/configs/bananapi_m2_plus_h5_defconfig index fb6c945919..1634f62619 100644 --- a/configs/bananapi_m2_plus_h5_defconfig +++ b/configs/bananapi_m2_plus_h5_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-bananapi-m2-plus" CONFIG_SPL=y CONFIG_MACH_SUN50I_H5=y CONFIG_DRAM_CLK=672 -CONFIG_MACPWR="PD6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SUN8I_EMAC=y diff --git a/configs/i12-tvbox_defconfig b/configs/i12-tvbox_defconfig index 257dd89af4..37f0f53ae7 100644 --- a/configs/i12-tvbox_defconfig +++ b/configs/i12-tvbox_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-i12-tvbox" CONFIG_SPL=y CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=384 -CONFIG_MACPWR="PH21" CONFIG_VIDEO_COMPOSITE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig index 0ff666b2ee..c99be7cea4 100644 --- a/configs/jesurun_q5_defconfig +++ b/configs/jesurun_q5_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5" CONFIG_SPL=y CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=312 -CONFIG_MACPWR="PH19" CONFIG_USB0_VBUS_PIN="PB9" CONFIG_VIDEO_COMPOSITE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig index 0e4cdc4467..2f92228eb7 100644 --- a/configs/mixtile_loftq_defconfig +++ b/configs/mixtile_loftq_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mixtile-loftq" CONFIG_SPL=y CONFIG_MACH_SUN6I=y CONFIG_DRAM_ZQ=251 -CONFIG_MACPWR="PA21" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB1_VBUS_PIN="PH24" CONFIG_USB2_VBUS_PIN="" diff --git a/configs/nanopi_m1_plus_defconfig b/configs/nanopi_m1_plus_defconfig index 76655d79ae..078e98b644 100644 --- a/configs/nanopi_m1_plus_defconfig +++ b/configs/nanopi_m1_plus_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-m1-plus" CONFIG_SPL=y CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=408 -CONFIG_MACPWR="PD6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SUN8I_EMAC=y diff --git a/configs/nanopi_neo_plus2_defconfig b/configs/nanopi_neo_plus2_defconfig index 924ff38f17..85ff31c6fe 100644 --- a/configs/nanopi_neo_plus2_defconfig +++ b/configs/nanopi_neo_plus2_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN50I_H5=y CONFIG_DRAM_CLK=408 CONFIG_DRAM_ZQ=3881977 # CONFIG_DRAM_ODT_EN is not set -CONFIG_MACPWR="PD6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SUN8I_EMAC=y diff --git a/configs/nanopi_r1s_h5_defconfig b/configs/nanopi_r1s_h5_defconfig index 27cf172d72..2a6f94afe4 100644 --- a/configs/nanopi_r1s_h5_defconfig +++ b/configs/nanopi_r1s_h5_defconfig @@ -6,7 +6,6 @@ CONFIG_MACH_SUN50I_H5=y CONFIG_DRAM_CLK=672 CONFIG_DRAM_ZQ=3881977 # CONFIG_DRAM_ODT_EN is not set -CONFIG_MACPWR="PD6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SUN8I_EMAC=y diff --git a/configs/orangepi_pc2_defconfig b/configs/orangepi_pc2_defconfig index 777af8c60e..fb6fbaf787 100644 --- a/configs/orangepi_pc2_defconfig +++ b/configs/orangepi_pc2_defconfig @@ -5,7 +5,6 @@ CONFIG_SPL=y CONFIG_MACH_SUN50I_H5=y CONFIG_DRAM_CLK=672 CONFIG_DRAM_ZQ=3881977 -CONFIG_MACPWR="PD6" CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y diff --git a/configs/orangepi_plus2e_defconfig b/configs/orangepi_plus2e_defconfig index 138a6a72b8..5e2cbc48ea 100644 --- a/configs/orangepi_plus2e_defconfig +++ b/configs/orangepi_plus2e_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-plus2e" CONFIG_SPL=y CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=672 -CONFIG_MACPWR="PD6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y diff --git a/configs/orangepi_plus_defconfig b/configs/orangepi_plus_defconfig index ed585881d4..092ce77a6c 100644 --- a/configs/orangepi_plus_defconfig +++ b/configs/orangepi_plus_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-plus" CONFIG_SPL=y CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=672 -CONFIG_MACPWR="PD6" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB1_VBUS_PIN="PG13" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set diff --git a/configs/orangepi_win_defconfig b/configs/orangepi_win_defconfig index df11ad8c8f..3ddaf050a4 100644 --- a/configs/orangepi_win_defconfig +++ b/configs/orangepi_win_defconfig @@ -3,7 +3,6 @@ CONFIG_ARCH_SUNXI=y CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-orangepi-win" CONFIG_SPL=y CONFIG_MACH_SUN50I=y -CONFIG_MACPWR="PD14" CONFIG_SPL_SPI_SUNXI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPI_FLASH_WINBOND=y diff --git a/configs/pine_h64_defconfig b/configs/pine_h64_defconfig index 6dac6098d0..4712b8e469 100644 --- a/configs/pine_h64_defconfig +++ b/configs/pine_h64_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-pine-h64" CONFIG_SPL=y CONFIG_MACH_SUN50I_H6=y CONFIG_SUNXI_DRAM_H6_LPDDR3=y -CONFIG_MACPWR="PC16" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB3_VBUS_PIN="PL5" CONFIG_SPL_SPI_SUNXI=y diff --git a/configs/zeropi_defconfig b/configs/zeropi_defconfig index 11f3715e6d..7901bffd15 100644 --- a/configs/zeropi_defconfig +++ b/configs/zeropi_defconfig @@ -4,7 +4,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-zeropi" CONFIG_SPL=y CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=408 -CONFIG_MACPWR="PD6" # CONFIG_VIDEO_DE2 is not set # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c index 04c3274fbe..4ba9ee1529 100644 --- a/drivers/net/sun8i_emac.c +++ b/drivers/net/sun8i_emac.c @@ -29,6 +29,7 @@ #include #include #include +#include #define MDIO_CMD_MII_BUSY BIT(0) #define MDIO_CMD_MII_WRITE BIT(1) @@ -170,6 +171,7 @@ struct emac_eth_dev { #if CONFIG_IS_ENABLED(DM_GPIO) struct gpio_desc reset_gpio; #endif + struct udevice *phy_reg; }; @@ -720,6 +722,9 @@ static int sun8i_emac_eth_probe(struct udevice *dev) sun8i_emac_set_syscon(sun8i_pdata, priv); + if (priv->phy_reg) + regulator_set_enable(priv->phy_reg, true); + sun8i_mdio_init(dev->name, dev); priv->bus = miiphy_get_dev_by_name(dev->name); @@ -829,6 +834,8 @@ static int sun8i_emac_eth_of_to_plat(struct udevice *dev) priv->sysctl_reg = (void *)syscon_base + priv->variant->syscon_offset; + device_get_supply_regulator(dev, "phy-supply", &priv->phy_reg); + pdata->phy_interface = -1; priv->phyaddr = -1; priv->use_internal_phy = false; diff --git a/drivers/net/sunxi_emac.c b/drivers/net/sunxi_emac.c index b599b84852..f546ad1fe8 100644 --- a/drivers/net/sunxi_emac.c +++ b/drivers/net/sunxi_emac.c @@ -598,9 +598,9 @@ static int sunxi_emac_eth_of_to_plat(struct udevice *dev) pdata->iobase = dev_read_addr(dev); phy_node = dev_get_phy_node(dev); - if (phy_node == ofnode_null()) { + if (!ofnode_valid(phy_node)) { dev_err(dev, "failed to get PHY node\n"); - return ret; + return -ENOENT; } /* * The PHY regulator is in the MDIO node, not the EMAC or PHY node.