From: Michael Walle Date: Mon, 13 May 2024 23:43:19 +0000 (+0200) Subject: sunxi: SPL SPI: add support for the V3s SoC X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=41b766eb0b4f1b0bd7ead609fde88bc7753b8cab;p=u-boot.git sunxi: SPL SPI: add support for the V3s SoC The V3s is identical regarding register layout, clocks and resets to the sun6i variants. Therefore, we can just add the MACH_SUN8I_V3S to the sun6i compatible ones. SPI boot was tested on a custom board with a Gigadevice GD25Q64 8MiB SPI flash. Signed-off-by: Michael Walle Reviewed-by: Andre Przywara --- diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index ddf9414b08..17666814c5 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1078,7 +1078,7 @@ config SPL_STACK_R_ADDR config SPL_SPI_SUNXI bool "Support for SPI Flash on Allwinner SoCs in SPL" - depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || SUN50I_GEN_H6 || MACH_SUNIV || SUNXI_GEN_NCAT2 + depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || MACH_SUN8I_V3S || SUN50I_GEN_H6 || MACH_SUNIV || SUNXI_GEN_NCAT2 help Enable support for SPI Flash. This option allows SPL to read from sunxi SPI Flash. It uses the same method as the boot ROM, so does diff --git a/arch/arm/mach-sunxi/spl_spi_sunxi.c b/arch/arm/mach-sunxi/spl_spi_sunxi.c index 7acb44f52a..d7abdc2e40 100644 --- a/arch/arm/mach-sunxi/spl_spi_sunxi.c +++ b/arch/arm/mach-sunxi/spl_spi_sunxi.c @@ -140,7 +140,8 @@ static bool is_sun6i_gen_spi(void) { return IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I) || IS_ENABLED(CONFIG_SUN50I_GEN_H6) || - IS_ENABLED(CONFIG_SUNXI_GEN_NCAT2); + IS_ENABLED(CONFIG_SUNXI_GEN_NCAT2) || + IS_ENABLED(CONFIG_MACH_SUN8I_V3S); } static uintptr_t spi0_base_address(void)