From: Baocheng Su Date: Tue, 22 Oct 2024 06:04:27 +0000 (+0200) Subject: board: iot2050: Support new IOT2050-SM variant X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=3acd534b739c7edcce59ad625777508e7a1b36db;p=u-boot.git board: iot2050: Support new IOT2050-SM variant Main differences between the new variant and Advanced PG2: 1. Arduino interface is removed. Instead, an new ASIC is added for communicating with PLC 1200 signal modules. 2. USB 3.0 type A connector is removed, only USB 2.0 type A connector is available. 3. DP interface is tailored down. Instead, to communicate with the PLC 1200 signal modules, a USB 3.0 type B connector is added but the signal is not USB. 4. DDR size is increased to 4 GB. 5. Two sensors are added, one tilt sensor and one light sensor. Signed-off-by: Baocheng Su [Jan: rebased over OF_UPSTREAM] Signed-off-by: Jan Kiszka --- diff --git a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi index 1b31d412b4..f49d6f262f 100644 --- a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi +++ b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi @@ -229,7 +229,10 @@ }; fit@380000 { - fit,fdt-list-val = "ti/k3-am6528-iot2050-basic-pg2", "ti/k3-am6548-iot2050-advanced-pg2", "ti/k3-am6548-iot2050-advanced-m2"; + fit,fdt-list-val = "ti/k3-am6528-iot2050-basic-pg2", + "ti/k3-am6548-iot2050-advanced-pg2", + "ti/k3-am6548-iot2050-advanced-m2", + "ti/k3-am6548-iot2050-advanced-sm"; images { bkey-usb3-overlay { diff --git a/arch/arm/dts/k3-am6548-iot2050-advanced-sm-u-boot.dtsi b/arch/arm/dts/k3-am6548-iot2050-advanced-sm-u-boot.dtsi new file mode 120000 index 0000000000..859776d3ff --- /dev/null +++ b/arch/arm/dts/k3-am6548-iot2050-advanced-sm-u-boot.dtsi @@ -0,0 +1 @@ +k3-am6528-iot2050-basic-pg2-u-boot.dtsi \ No newline at end of file diff --git a/board/siemens/iot2050/board.c b/board/siemens/iot2050/board.c index 9d4c9cf1b3..e6bedc3891 100644 --- a/board/siemens/iot2050/board.c +++ b/board/siemens/iot2050/board.c @@ -174,6 +174,14 @@ static bool board_is_m2(void) strcmp((char *)info->name, "IOT2050-ADVANCED-M2") == 0; } +static bool board_is_sm(void) +{ + struct iot2050_info *info = IOT2050_INFO_DATA; + + return info->magic == IOT2050_INFO_MAGIC && + strcmp((char *)info->name, "IOT2050-ADVANCED-SM") == 0; +} + static void remove_mmc1_target(void) { char *boot_targets = strdup(env_get("boot_targets")); @@ -189,7 +197,10 @@ static void remove_mmc1_target(void) static void enable_pcie_connector_power(void) { - set_pinvalue("gpio@601000_17", "P3V3_PCIE_CON_EN", 1); + if (board_is_sm()) + set_pinvalue("gpio@601000_22", "P3V3_PCIE_CON_EN", 1); + else + set_pinvalue("gpio@601000_17", "P3V3_PCIE_CON_EN", 1); udelay(4 * 100); } @@ -230,6 +241,8 @@ void set_board_info_env(void) fdtfile = "ti/k3-am6548-iot2050-advanced.dtb"; else if (board_is_m2()) fdtfile = "ti/k3-am6548-iot2050-advanced-m2.dtb"; + else if (board_is_sm()) + fdtfile = "ti/k3-am6548-iot2050-advanced-sm.dtb"; else fdtfile = "ti/k3-am6548-iot2050-advanced-pg2.dtb"; } else { diff --git a/configs/iot2050_defconfig b/configs/iot2050_defconfig index 78db6d2109..2624f0cb57 100644 --- a/configs/iot2050_defconfig +++ b/configs/iot2050_defconfig @@ -80,7 +80,7 @@ CONFIG_CMD_TIME=y CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_UPSTREAM=y -CONFIG_OF_LIST="ti/k3-am6528-iot2050-basic ti/k3-am6528-iot2050-basic-pg2 ti/k3-am6548-iot2050-advanced ti/k3-am6548-iot2050-advanced-pg2 ti/k3-am6548-iot2050-advanced-m2" +CONFIG_OF_LIST="ti/k3-am6528-iot2050-basic ti/k3-am6528-iot2050-basic-pg2 ti/k3-am6548-iot2050-advanced ti/k3-am6548-iot2050-advanced-pg2 ti/k3-am6548-iot2050-advanced-m2 ti/k3-am6548-iot2050-advanced-sm" CONFIG_OF_OVERLAY_LIST="ti/k3-am6548-iot2050-advanced-m2-bkey-usb3 ti/k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie" CONFIG_SPL_MULTI_DTB_FIT=y CONFIG_SPL_OF_LIST="ti/k3-am6528-iot2050-basic" diff --git a/doc/board/siemens/iot2050.rst b/doc/board/siemens/iot2050.rst index d0c0a41209..37b23f6146 100644 --- a/doc/board/siemens/iot2050.rst +++ b/doc/board/siemens/iot2050.rst @@ -8,7 +8,9 @@ The SIMATIC IOT2050 is an open industrial IoT gateway that is using the TI AM6528 GP (Basic variant) or the AM6548 HS (Advanced variant). The Advanced variant is prepared for secure boot. M.2 Variant also uses the AM6548 HS. Instead of a MiniPCI connector, it comes with two M.2 connectors and can -support 5G/WIFI/BT applications or connect an SSD. +support 5G/WIFI/BT applications or connect an SSD. Compared with the AM6548 +Advanced variant, SM variant removes the Arduino interface, and adds a new +ASIC for communicating with the PLC 1200 signal modules. The IOT2050 starts only from OSPI. It loads a Siemens-provided bootloader called SE-Boot for the MCU domain (R5F cores), then hands over to ATF and