From: Adam Ford Date: Tue, 31 Jul 2018 10:58:01 +0000 (-0500) Subject: usb: musb-new: omap2430: Enable DM_USB and OF support X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=1a35526e1d54a346e12435bee757bfe47093157d;p=u-boot.git usb: musb-new: omap2430: Enable DM_USB and OF support With upcoming changes that require CONFIG_BLK, this broke USB Mass Storage on the OMAP3 boards because if CONFIG_BLK is enabled, it assumes that DM_USB is enabled, but it wasn't yet available on omap3 and omap4 boards. This patch converts the OMAP2430 MUSB glue to support DM_USB and extracts the necessary information based on the device tree. It's based on the ti-musb driver, but there are enough significant differences in both the architecture and device tree entires between am33xx and OMAP3/OMAP4, that I think it makes sense to continue to keep the separate. Per doc/driver-model/usb-info.txt, the USB gadget stuff hasn't migrated to DM_USB yet, so this only supports USB Host for now. Users wanting USB Gadgets will need to disable DM_USB and leave it the old way for now. Signed-off-by: Adam Ford --- diff --git a/drivers/usb/musb-new/omap2430.c b/drivers/usb/musb-new/omap2430.c index fd63c07789..342d76bd6f 100644 --- a/drivers/usb/musb-new/omap2430.c +++ b/drivers/usb/musb-new/omap2430.c @@ -9,14 +9,18 @@ * This file is part of the Inventra Controller Driver for Linux. */ #include +#include +#include +#include +#include #include #include #include #include #include "linux-compat.h" - #include "musb_core.h" #include "omap2430.h" +#include "musb_uboot.h" static inline void omap2430_low_level_exit(struct musb *musb) { @@ -43,6 +47,7 @@ static int omap2430_musb_init(struct musb *musb) u32 l; int status = 0; unsigned long int start; + struct omap_musb_board_data *data = (struct omap_musb_board_data *)musb->controller; @@ -129,3 +134,146 @@ const struct musb_platform_ops omap2430_ops = { .enable = omap2430_musb_enable, .disable = omap2430_musb_disable, }; + +#if defined(CONFIG_DM_USB) + +struct omap2430_musb_platdata { + void *base; + void *ctrl_mod_base; + struct musb_hdrc_platform_data plat; + struct musb_hdrc_config musb_config; + struct omap_musb_board_data otg_board_data; +}; + +static int omap2430_musb_ofdata_to_platdata(struct udevice *dev) +{ + struct omap2430_musb_platdata *platdata = dev_get_platdata(dev); + const void *fdt = gd->fdt_blob; + int node = dev_of_offset(dev); + + platdata->base = (void *)dev_read_addr_ptr(dev); + + platdata->musb_config.multipoint = fdtdec_get_int(fdt, node, + "multipoint", + -1); + if (platdata->musb_config.multipoint < 0) { + pr_err("MUSB multipoint DT entry missing\n"); + return -ENOENT; + } + + platdata->musb_config.dyn_fifo = 1; + platdata->musb_config.num_eps = fdtdec_get_int(fdt, node, + "num-eps", -1); + if (platdata->musb_config.num_eps < 0) { + pr_err("MUSB num-eps DT entry missing\n"); + return -ENOENT; + } + + platdata->musb_config.ram_bits = fdtdec_get_int(fdt, node, + "ram-bits", -1); + if (platdata->musb_config.ram_bits < 0) { + pr_err("MUSB ram-bits DT entry missing\n"); + return -ENOENT; + } + + platdata->plat.power = fdtdec_get_int(fdt, node, + "power", -1); + if (platdata->plat.power < 0) { + pr_err("MUSB power DT entry missing\n"); + return -ENOENT; + } + + platdata->otg_board_data.interface_type = fdtdec_get_int(fdt, node, + "interface-type", -1); + if (platdata->otg_board_data.interface_type < 0) { + pr_err("MUSB interface-type DT entry missing\n"); + return -ENOENT; + } + +#if 0 /* In a perfect world, mode would be set to OTG, mode 3 from DT */ + platdata->plat.mode = fdtdec_get_int(fdt, node, + "mode", -1); + if (platdata->plat.mode < 0) { + pr_err("MUSB mode DT entry missing\n"); + return -ENOENT; + } +#else /* MUSB_OTG, it doesn't work */ +#ifdef CONFIG_USB_MUSB_HOST /* Host seems to be the only option that works */ + platdata->plat.mode = MUSB_HOST; +#else /* For that matter, MUSB_PERIPHERAL doesn't either */ + platdata->plat.mode = MUSB_PERIPHERAL; +#endif +#endif + platdata->otg_board_data.dev = dev; + platdata->plat.config = &platdata->musb_config; + platdata->plat.platform_ops = &omap2430_ops; + platdata->plat.board_data = &platdata->otg_board_data; + return 0; +} + +static int omap2430_musb_probe(struct udevice *dev) +{ +#ifdef CONFIG_USB_MUSB_HOST + struct musb_host_data *host = dev_get_priv(dev); +#endif + struct omap2430_musb_platdata *platdata = dev_get_platdata(dev); + struct usb_bus_priv *priv = dev_get_uclass_priv(dev); + struct omap_musb_board_data *otg_board_data; + int ret; + void *base = dev_read_addr_ptr(dev); + + priv->desc_before_addr = true; + + otg_board_data = &platdata->otg_board_data; + +#ifdef CONFIG_USB_MUSB_HOST + host->host = musb_init_controller(&platdata->plat, + (struct device *)otg_board_data, + platdata->base); + if (!host->host) { + return -EIO; + } + + ret = musb_lowlevel_init(host); +#else + ret = musb_register(&platdata->plat, + (struct device *)otg_board_data, + platdata->base); +#endif + return ret; +} + +static int omap2430_musb_remove(struct udevice *dev) +{ + struct musb_host_data *host = dev_get_priv(dev); + + musb_stop(host->host); + + return 0; +} + +static const struct udevice_id omap2430_musb_ids[] = { + { .compatible = "ti,omap3-musb" }, + { .compatible = "ti,omap4-musb" }, + { } +}; + +U_BOOT_DRIVER(omap2430_musb) = { + .name = "omap2430-musb", +#ifdef CONFIG_USB_MUSB_HOST + .id = UCLASS_USB, +#else + .id = UCLASS_USB_DEV_GENERIC, +#endif + .of_match = omap2430_musb_ids, + .ofdata_to_platdata = omap2430_musb_ofdata_to_platdata, + .probe = omap2430_musb_probe, + .remove = omap2430_musb_remove, +#ifdef CONFIG_USB_MUSB_HOST + .ops = &musb_usb_ops, +#endif + .platdata_auto_alloc_size = sizeof(struct omap2430_musb_platdata), + .priv_auto_alloc_size = sizeof(struct musb_host_data), +}; + +#endif /* CONFIG_DM_USB */