From: Dario Binacchi Date: Sat, 23 Jan 2021 18:43:52 +0000 (+0100) Subject: Replace video_uc_platdata with video_uc_plat X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=196947b103e0984f32d90d2574aae3b870eedc4c;p=u-boot.git Replace video_uc_platdata with video_uc_plat The video_uc_platdata structure no longer exists. It has been renamed video_uc_plat. Signed-off-by: Dario Binacchi --- diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index d782eb806a..bdacf67795 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -30,7 +30,7 @@ config VIDEO_PCI_DEFAULT_FB_SIZE help Generally, video drivers request the amount of memory they need for the frame buffer when they are bound, by setting the size field in - struct video_uc_platdata. That memory is then reserved for use after + struct video_uc_plat. That memory is then reserved for use after relocation. But PCI drivers cannot be bound before relocation unless they are mentioned in the devicetree. @@ -51,7 +51,7 @@ config VIDEO_COPY U-Boot) and then copied to the hardware frame-buffer as needed. To use this, your video driver must set @copy_base in - struct video_uc_platdata. + struct video_uc_plat. config BACKLIGHT_PWM bool "Generic PWM based Backlight Driver" diff --git a/drivers/video/nexell_display.c b/drivers/video/nexell_display.c index b47bef3578..c7621ef49c 100644 --- a/drivers/video/nexell_display.c +++ b/drivers/video/nexell_display.c @@ -15,7 +15,7 @@ #include #include #include -#include /* For struct video_uc_platdata */ +#include /* For struct video_uc_plat */ #include #include #include