From: Michal Simek Date: Wed, 25 Oct 2023 07:25:37 +0000 (+0200) Subject: Kconfig: Remove all default n/no options X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=18370f14975c;p=u-boot.git Kconfig: Remove all default n/no options Similar change was done by commit b4c2c151b14b ("Kconfig: Remove all default n/no options") and again sync is required. default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek Reviewed-by: Svyatoslav Ryhel # tegra Reviewed-by: Tom Rini Reviewed-by: Angelo Dureghello --- diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig index ccce6a78ca..d2e4205c5c 100644 --- a/arch/arm/mach-imx/mxs/Kconfig +++ b/arch/arm/mach-imx/mxs/Kconfig @@ -54,7 +54,6 @@ config SYS_SOC config SPL_MXS_PMU_MINIMAL_VDD5V_CURRENT bool "Force minimal current draw from VDD5V by MX28 PMU" - default n help After setting this option, the current drawn from VDD5V by the PMU is reduced to zero - the DCDC_BATT is used as @@ -62,7 +61,6 @@ config SPL_MXS_PMU_MINIMAL_VDD5V_CURRENT config SPL_MXS_PMU_DISABLE_BATT_CHARGE bool "Disable Battery Charging in MX28 PMU" - default n config SPL_MXS_PMU_ENABLE_4P2_LINEAR_REGULATOR bool "Enable the 4P2 linear regulator in MX28 PMU" diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index c43c185c17..a6c69c300d 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -450,7 +450,6 @@ config ROCKCHIP_BOOT_MODE_REG config ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON bool "Disable device boot on power plug-in" depends on PMIC_RK8XX - default n ---help--- Say Y here to prevent the device from booting up because of a plug-in event. When set, the device will boot briefly to determine why it was diff --git a/arch/arm/mach-snapdragon/Kconfig b/arch/arm/mach-snapdragon/Kconfig index 0e073045be..2fc1521e2d 100644 --- a/arch/arm/mach-snapdragon/Kconfig +++ b/arch/arm/mach-snapdragon/Kconfig @@ -14,7 +14,6 @@ config SPL_SYS_MALLOC_F_LEN config SDM845 bool "Qualcomm Snapdragon 845 SoC" - default n select LINUX_KERNEL_IMAGE_HEADER config LNX_KRNL_IMG_TEXT_OFFSET_BASE diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 40ca7d7b3a..a10e4c06b6 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -811,7 +811,6 @@ config AXP_GPIO config AXP_DISABLE_BOOT_ON_POWERON bool "Disable device boot on power plug-in" depends on AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER - default n ---help--- Say Y here to prevent the device from booting up because of a plug-in event. When set, the device will boot into the SPL briefly to diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 464bd0798f..0e94b84fe6 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -18,7 +18,6 @@ config TEGRA_CLKRST config TEGRA_CRYPTO bool "Tegra AES128 crypto module" select AES - default n config TEGRA_GP_PADCTRL bool diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 587edd50d7..b288c65e7f 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -200,7 +200,6 @@ source "board/sysam/stmark2/Kconfig" config M68K_QEMU bool "Build with workarounds for incomplete QEMU emulation" - default n help QEMU 8.x currently does not implement RAMBAR accesses and DMA timers. Enable this option for U-Boot CI purposes only diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index e291456530..8fc81fb284 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -68,7 +68,6 @@ config SPL_SYS_DCACHE_OFF config SPL_ZERO_MEM_BEFORE_USE bool "Zero memory before use" depends on SPL - default n help Zero stack/GD/malloc area in SPL before using them, this is needed for Sifive core devices that uses L2 cache to store SPL. diff --git a/board/asus/grouper/Kconfig b/board/asus/grouper/Kconfig index 912c6c5fba..47d9bae946 100644 --- a/board/asus/grouper/Kconfig +++ b/board/asus/grouper/Kconfig @@ -12,11 +12,9 @@ config SYS_CONFIG_NAME config GROUPER_TPS65911 bool "Enable support TI TPS65911 PMIC" select CMD_POWEROFF - default n config GROUPER_MAX77663 bool "Enable support MAXIM MAX77663 PMIC" select CMD_POWEROFF - default n endif diff --git a/board/asus/transformer-t30/Kconfig b/board/asus/transformer-t30/Kconfig index 3c36f4ada2..accc999c43 100644 --- a/board/asus/transformer-t30/Kconfig +++ b/board/asus/transformer-t30/Kconfig @@ -14,7 +14,6 @@ config TRANSFORMER_SPI_BOOT select TEGRA20_SLINK select DM_SPI_FLASH select SPI_FLASH_WINBOND - default n help Tegra 3 based Transformers with Windows RT have core boot sequence (BCT and EBT) on separate SPI FLASH diff --git a/board/keymile/Kconfig b/board/keymile/Kconfig index c6576aa652..f7e9b74f57 100644 --- a/board/keymile/Kconfig +++ b/board/keymile/Kconfig @@ -125,7 +125,6 @@ config SYS_IVM_EEPROM_PAGE_LEN config PG_WCOM_UBOOT_UPDATE_SUPPORTED bool "Enable U-Boot Field Fail-Safe Update Functionality" select EVENT - default n help Indicates that field fail-safe u-boot update is supported. This functionality works only for designs that are booting @@ -133,7 +132,6 @@ config PG_WCOM_UBOOT_UPDATE_SUPPORTED config PG_WCOM_UBOOT_BOOTPACKAGE bool "U-Boot Is Part Of Factory Boot-Package Image" - default n help Indicates that u-boot will be a part of the factory programmed boot-package image. @@ -149,7 +147,6 @@ config PG_WCOM_UBOOT_UPDATE_TEXT_BASE config PG_WCOM_UBOOT_UPDATE bool "U-Boot Is Part Of Factory Boot-Package Image" - default n help Indicates that u-boot will be a part of the embedded software and programmed at field. diff --git a/board/lg/x3-t30/Kconfig b/board/lg/x3-t30/Kconfig index 20ea4f5f32..53d776019d 100644 --- a/board/lg/x3-t30/Kconfig +++ b/board/lg/x3-t30/Kconfig @@ -11,14 +11,12 @@ config SYS_CONFIG_NAME config DEVICE_P880 bool "Enable support for LG Optimus 4X HD" - default n help LG Optimus 4X HD derives from x3 board but has slight differences. config DEVICE_P895 bool "Enable support for LG Optimus Vu" - default n help LG Optimus Vu derives from x3 board but has slight differences. diff --git a/cmd/Kconfig b/cmd/Kconfig index 205df2f1fb..60aed2c307 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -246,7 +246,6 @@ config CMD_BOOTM_PRE_LOAD bool "enable pre-load on bootm" depends on CMD_BOOTM depends on IMAGE_PRE_LOAD - default n help Enable support of stage pre-load for the bootm command. This stage allow to check or modify the image provided @@ -2360,7 +2359,6 @@ config CMD_VIDCONSOLE config CMD_SELECT_FONT bool "select font size" depends on VIDEO - default n help Enabling this will provide 'font' command. Allows font selection at runtime. @@ -2880,7 +2878,6 @@ config CMD_UBIFS config MMC_SPEED_MODE_SET bool "set speed mode using mmc command" depends on CMD_MMC - default n help Enable setting speed mode using mmc rescan and mmc dev commands. The speed mode is provided as the last argument in these commands diff --git a/drivers/crypto/fsl/Kconfig b/drivers/crypto/fsl/Kconfig index 91a51cc5fe..eaad19633f 100644 --- a/drivers/crypto/fsl/Kconfig +++ b/drivers/crypto/fsl/Kconfig @@ -77,7 +77,6 @@ endif config FSL_DCP_RNG bool "Enable Random Number Generator support" depends on DM_RNG - default n help Enable support for the hardware based random number generator module of the DCP. It uses the True Random Number Generator (TRNG) diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig index 22cb9d637c..d10edd2774 100644 --- a/drivers/memory/Kconfig +++ b/drivers/memory/Kconfig @@ -61,7 +61,6 @@ config TI_GPMC if TI_GPMC config TI_GPMC_DEBUG bool "Debug Texas Instruments GPMC timings" - default n help Enable this to print GPMC timings before and after the GPMC registers are programmed. This should not be left enabled on production systems. diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index fccd9b89b8..97057de8bf 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -375,7 +375,6 @@ config SPL_MXC_OCOTP config NPCM_OTP bool "Nnvoton NPCM BMC On-Chip OTP Memory Support" depends on (ARM && ARCH_NPCM) - default n help Support NPCM BMC OTP memory (fuse). To compile this driver as a module, choose M here: the module diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index 72547f00fb..a13e6f59cb 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -614,7 +614,6 @@ config ROCKCHIP_NAND config ROCKCHIP_NAND_SKIP_BBTSCAN bool "Skip the automatic BBT scan with Rockchip NAND controllers" depends on ROCKCHIP_NAND - default n help Skip the automatic BBT scan with the NAND_SKIP_BBTSCAN option when data content is not in MTD format or diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig index a9617c6c58..76c424d75e 100644 --- a/drivers/mtd/spi/Kconfig +++ b/drivers/mtd/spi/Kconfig @@ -107,7 +107,6 @@ config SPI_FLASH_SMART_HWCAPS config SPI_NOR_BOOT_SOFT_RESET_EXT_INVERT bool "Command extension type is INVERT for Software Reset on boot" - default n help Because of SFDP information can not be get before boot. So define command extension type is INVERT when Software Reset on boot only. diff --git a/drivers/sm/Kconfig b/drivers/sm/Kconfig index f0987275d2..926af28633 100644 --- a/drivers/sm/Kconfig +++ b/drivers/sm/Kconfig @@ -4,6 +4,5 @@ config SM config MESON_SM bool "Amlogic Secure Monitor driver" select SM - default n help Say y here to enable the Amlogic secure monitor driver. diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 66cf727113..69b184b0d9 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -460,7 +460,6 @@ config SANDBOX_SPI_MAX_CS config SPI_ASPEED_SMC bool "ASPEED SPI flash controller driver" depends on DM_SPI && SPI_MEM - default n help Enable ASPEED SPI flash controller driver for AST2500 and AST2600 SoCs. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 1a883babf4..b501ea514b 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -231,7 +231,6 @@ config USB_EHCI_MXS config USB_EHCI_NPCM bool "Support for Nuvoton NPCM on-chip EHCI USB controller" depends on ARCH_NPCM - default n ---help--- Enables support for the on-chip EHCI controller on Nuvoton NPCM chips. @@ -368,7 +367,6 @@ config USB_OHCI_DA8XX config USB_OHCI_NPCM bool "Support for Nuvoton NPCM on-chip OHCI USB controller" depends on ARCH_NPCM - default n ---help--- Enables support for the on-chip OHCI controller on Nuvoton NPCM chips. diff --git a/fs/ubifs/Kconfig b/fs/ubifs/Kconfig index 949b288411..690e77ef8d 100644 --- a/fs/ubifs/Kconfig +++ b/fs/ubifs/Kconfig @@ -8,7 +8,6 @@ config UBIFS_SILENCE_MSG config UBIFS_SILENCE_DEBUG_DUMP bool "UBIFS silence debug dumps" default y if UBIFS_SILENCE_MSG - default n help Make the debug dumps from UBIFS stop printing. This decreases size of U-Boot binary.