From: Holger Brunck Date: Wed, 21 Mar 2012 12:42:46 +0000 (+0100) Subject: powerpc/83xx: add kmcoge5ne board support X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=0f2b721c80fa50c8e09548f0ad1b4210d2197bf9;p=u-boot.git powerpc/83xx: add kmcoge5ne board support This board is a MPC8360 board. Two flashes are present a NOR flash were u-boot and the u-boot environment is stored and a NAND flash for the application code. This board has 512MB SDRAM. Additionaly we introduce a common km8360.h file and convert kmeter1 to use this. Signed-off-by: Holger Brunck Signed-off-by: Christian Herzig cc: Kim Phillips cc: Valentin Longchamp cc: Gerlando Falauto cc: Heiko Schocher Signed-off-by: Kim Phillips --- diff --git a/MAINTAINERS b/MAINTAINERS index 17befd0a79..252c7bf391 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -66,6 +66,10 @@ Oliver Brown gw8260 MPC8260 +Holger Brunck + + kmcoge5ne MPC8360 + Cyril Chemparathy tnetv107x_evm tnetv107x diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c index c3a05e6e2c..1043ccd9a7 100644 --- a/board/keymile/km83xx/km83xx.c +++ b/board/keymile/km83xx/km83xx.c @@ -32,7 +32,7 @@ const qe_iop_conf_t qe_iop_conf_tab[] = { /* port pin dir open_drain assign */ -#if defined(CONFIG_KMETER1) +#if defined(CONFIG_MPC8360) /* MDIO */ {0, 1, 3, 0, 2}, /* MDIO */ {0, 2, 1, 0, 1}, /* MDC */ diff --git a/boards.cfg b/boards.cfg index f58a5c509c..a723f67eb1 100644 --- a/boards.cfg +++ b/boards.cfg @@ -606,7 +606,8 @@ MPC8360ERDK_66 powerpc mpc83xx mpc8360erdk freesca MPC837XEMDS powerpc mpc83xx mpc837xemds freescale - MPC837XEMDS MPC837XEMDS_HOST powerpc mpc83xx mpc837xemds freescale - MPC837XEMDS:PCI MPC837XERDB powerpc mpc83xx mpc837xerdb freescale -kmeter1 powerpc mpc83xx km83xx keymile +kmcoge5ne powerpc mpc83xx km83xx keymile - km8360:KMCOGE5NE +kmeter1 powerpc mpc83xx km83xx keymile - km8360:KMETER1 MERGERBOX powerpc mpc83xx mergerbox matrix_vision MVBLM7 powerpc mpc83xx mvblm7 matrix_vision SIMPC8313_LP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_LP diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h index 2c266fae10..877d8418c0 100644 --- a/include/configs/km/km83xx-common.h +++ b/include/configs/km/km83xx-common.h @@ -54,6 +54,8 @@ */ #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_SDRAM_BASE2 (CONFIG_SYS_SDRAM_BASE + 0x10000000) /* +256M */ + #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) diff --git a/include/configs/km8360.h b/include/configs/km8360.h new file mode 100644 index 0000000000..230b0545b7 --- /dev/null +++ b/include/configs/km8360.h @@ -0,0 +1,281 @@ +/* + * (C) Copyright 2012 + * Holger Brunck, Keymile GmbH Hannover, + * Christian Herzig, Keymile AG Switzerland, + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* KMBEC FPGA (PRIO) */ +#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000 +#define CONFIG_SYS_KMBEC_FPGA_SIZE 64 + +#if defined CONFIG_KMETER1 +#define CONFIG_HOSTNAME kmeter1 +#define CONFIG_KM_BOARD_NAME "kmeter1" +#define CONFIG_KM_DEF_NETDEV "netdev=eth2\0" +#elif defined CONFIG_KMCOGE5NE +#define CONFIG_HOSTNAME kmcoge5ne +#define CONFIG_KM_BOARD_NAME "kmcoge5ne" +#define CONFIG_KM_DEF_NETDEV "netdev=eth1\0" +#define CONFIG_CMD_NAND +#define CONFIG_NAND_KMETER1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */ + +#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" +#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" +#define MTDIDS_DEFAULT "nor0=boot,nand0=app" + +#define MTDPARTS_DEFAULT "mtdparts=" \ + "boot:" \ + "768k(u-boot)," \ + "128k(env)," \ + "128k(envred)," \ + "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");" \ + "app:" \ + "-(" CONFIG_KM_UBI_PARTITION_NAME_APP ");" +#else +#error ("Board not supported") +#endif + +/* + * High Level Configuration Options + */ +#define CONFIG_QE /* Has QE */ +#define CONFIG_MPC8360 /* MPC8360 CPU specific */ + +#define CONFIG_SYS_TEXT_BASE 0xF0000000 + +/* include common defines/options for all 83xx Keymile boards */ +#include "km/km83xx-common.h" + +/* + * System IO Setup + */ +#define CONFIG_SYS_SICRH (SICRH_UC1EOBI | SICRH_UC2E1OBI) + +/* + * Hardware Reset Configuration Word + */ +#define CONFIG_SYS_HRCW_LOW (\ + HRCWL_CSB_TO_CLKIN_4X1 | \ + HRCWL_CORE_TO_CSB_2X1 | \ + HRCWL_CE_PLL_VCO_DIV_2 | \ + HRCWL_CE_TO_PLL_1X6) + +#define CONFIG_SYS_HRCW_HIGH (\ + HRCWH_CORE_ENABLE | \ + HRCWH_FROM_0X00000100 | \ + HRCWH_BOOTSEQ_DISABLE | \ + HRCWH_SW_WATCHDOG_DISABLE | \ + HRCWH_ROM_LOC_LOCAL_16BIT | \ + HRCWH_BIG_ENDIAN | \ + HRCWH_LALE_EARLY | \ + HRCWH_LDP_CLEAR) + +/** + * DDR RAM settings + */ +#define CONFIG_SYS_DDR_SDRAM_CFG (\ + SDRAM_CFG_SDRAM_TYPE_DDR2 | \ + SDRAM_CFG_SREN | \ + SDRAM_CFG_HSE) + +#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 + +#ifdef CONFIG_KMCOGE5NE +/** + * KMCOGE5NE has 512 MB RAM + */ +#define CONFIG_SYS_DDR_CS0_CONFIG (\ + CSCONFIG_EN | \ + CSCONFIG_AP | \ + CSCONFIG_ODT_RD_ONLY_CURRENT | \ + CSCONFIG_BANK_BIT_3 | \ + CSCONFIG_ROW_BIT_13 | \ + CSCONFIG_COL_BIT_10) +#else +#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ + CSCONFIG_ROW_BIT_13 | \ + CSCONFIG_COL_BIT_10 | \ + CSCONFIG_ODT_RD_ONLY_CURRENT) +#endif + +#define CONFIG_SYS_DDR_CLK_CNTL (\ + DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) + +#define CONFIG_SYS_DDR_INTERVAL (\ + (0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ + (0x203 << SDRAM_INTERVAL_REFINT_SHIFT)) + +#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f + +#define CONFIG_SYS_DDRCDR (\ + DDRCDR_EN | \ + DDRCDR_Q_DRN) +#define CONFIG_SYS_DDR_MODE 0x47860452 +#define CONFIG_SYS_DDR_MODE2 0x8080c000 + +#define CONFIG_SYS_DDR_TIMING_0 (\ + (2 << TIMING_CFG0_MRS_CYC_SHIFT) | \ + (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \ + (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \ + (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \ + (0 << TIMING_CFG0_WWT_SHIFT) | \ + (0 << TIMING_CFG0_RRT_SHIFT) | \ + (0 << TIMING_CFG0_WRT_SHIFT) | \ + (0 << TIMING_CFG0_RWT_SHIFT)) + +#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \ + (2 << TIMING_CFG1_WRTORD_SHIFT) | \ + (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ + (3 << TIMING_CFG1_WRREC_SHIFT) | \ + (7 << TIMING_CFG1_REFREC_SHIFT) | \ + (3 << TIMING_CFG1_ACTTORW_SHIFT) | \ + (8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ + (3 << TIMING_CFG1_PRETOACT_SHIFT)) + +#define CONFIG_SYS_DDR_TIMING_2 (\ + (0xa << TIMING_CFG2_FOUR_ACT_SHIFT) | \ + (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \ + (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \ + (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \ + (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \ + (5 << TIMING_CFG2_CPO_SHIFT) | \ + (0 << TIMING_CFG2_ADD_LAT_SHIFT)) + +#define CONFIG_SYS_DDR_TIMING_3 0x00000000 + +/* EEprom support */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 + +/* + * Local Bus Configuration & Clock Setup + */ +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_EADC LCRR_EADC_2 +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 + +/* + * PAXE on the local bus CS3 + */ +#define CONFIG_SYS_PAXE_BASE 0xA0000000 +#define CONFIG_SYS_PAXE_SIZE 256 + +#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PAXE_BASE + +#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000001C /* 512MB window size */ + +#define CONFIG_SYS_BR3_PRELIM (\ + CONFIG_SYS_PAXE_BASE | \ + (1 << BR_PS_SHIFT) | \ + BR_V) + +#define CONFIG_SYS_OR3_PRELIM (\ + MEG_TO_AM(CONFIG_SYS_PAXE_SIZE) | \ + OR_GPCM_CSNT | \ + OR_GPCM_ACS_DIV2 | \ + OR_GPCM_SCY_2 | \ + OR_GPCM_TRLX | \ + OR_GPCM_EAD) + +#ifdef CONFIG_KMCOGE5NE +/* + * BFTIC3 on the local bus CS4 + */ +#define CONFIG_SYS_BFTIC3_BASE 0xB0000000 +#define CONFIG_SYS_BFTIC3_SIZE 256 + +#define CONFIG_SYS_BR4_PRELIM (\ + CONFIG_SYS_BFTIC3_BASE |\ + (1 << BR_PS_SHIFT) | \ + BR_V) + +#define CONFIG_SYS_OR4_PRELIM (\ + MEG_TO_AM(CONFIG_SYS_BFTIC3_SIZE) |\ + OR_GPCM_CSNT | \ + OR_GPCM_ACS_DIV2 |\ + OR_GPCM_SCY_2 |\ + OR_GPCM_TRLX |\ + OR_GPCM_EAD) +#endif + +/* + * MMU Setup + */ + +/* PAXE: icache cacheable, but dcache-inhibit and guarded */ +#define CONFIG_SYS_IBAT5L (\ + CONFIG_SYS_PAXE_BASE | \ + BATL_PP_10 | \ + BATL_MEMCOHERENCE) + +#define CONFIG_SYS_IBAT5U (\ + CONFIG_SYS_PAXE_BASE | \ + BATU_BL_256M | \ + BATU_VS | \ + BATU_VP) + +#define CONFIG_SYS_DBAT5L (\ + CONFIG_SYS_PAXE_BASE | \ + BATL_PP_10 | \ + BATL_CACHEINHIBIT | \ + BATL_GUARDEDSTORAGE) + +#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U + + +#ifdef CONFIG_KMCOGE5NE +/* BFTIC3: icache cacheable, but dcache-inhibit and guarded */ +#define CONFIG_SYS_IBAT6L (\ + CONFIG_SYS_BFTIC3_BASE | \ + BATL_PP_10 | \ + BATL_MEMCOHERENCE) + +#define CONFIG_SYS_IBAT6U (\ + CONFIG_SYS_BFTIC3_BASE | \ + BATU_BL_256M | \ + BATU_VS | \ + BATU_VP) + +#define CONFIG_SYS_DBAT6L (\ + CONFIG_SYS_BFTIC3_BASE | \ + BATL_PP_10 | \ + BATL_CACHEINHIBIT | \ + BATL_GUARDEDSTORAGE) + +#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U + +/* DDR/LBC SDRAM next 256M: cacheable */ +#define CONFIG_SYS_IBAT7L (\ + CONFIG_SYS_SDRAM_BASE2 |\ + BATL_PP_10 |\ + BATL_CACHEINHIBIT |\ + BATL_GUARDEDSTORAGE) + +#define CONFIG_SYS_IBAT7U (\ + CONFIG_SYS_SDRAM_BASE2 |\ + BATU_BL_256M |\ + BATU_VS |\ + BATU_VP) +#else +#define CONFIG_SYS_IBAT6L (0) +#define CONFIG_SYS_IBAT6U (0) +#define CONFIG_SYS_IBAT7L (0) +#define CONFIG_SYS_IBAT7U (0) +#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L +#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U +#endif + +#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L +#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U + +#endif /* CONFIG */ diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h deleted file mode 100644 index f816da2a28..0000000000 --- a/include/configs/kmeter1.h +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Copyright (C) 2006 Freescale Semiconductor, Inc. - * Dave Liu - * - * Copyright (C) 2007 Logic Product Development, Inc. - * Peter Barada - * - * Copyright (C) 2007 MontaVista Software, Inc. - * Anton Vorontsov - * - * (C) Copyright 2008-2011 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_QE /* Has QE */ -#define CONFIG_MPC8360 /* MPC8360 CPU specific */ -#define CONFIG_KMETER1 /* KMETER1 board specific */ -#define CONFIG_HOSTNAME kmeter1 -#define CONFIG_KM_BOARD_NAME "kmeter1" - -#define CONFIG_SYS_TEXT_BASE 0xF0000000 -#define CONFIG_KM_DEF_NETDEV \ - "netdev=eth2\0" \ - -/* include common defines/options for all 83xx Keymile boards */ -#include "km/km83xx-common.h" - -#define CONFIG_MISC_INIT_R -/* - * System IO Setup - */ -#define CONFIG_SYS_SICRH (SICRH_UC1EOBI | SICRH_UC2E1OBI) - -/* - * Hardware Reset Configuration Word - */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_CSB_TO_CLKIN_4X1 | \ - HRCWL_CORE_TO_CSB_2X1 | \ - HRCWL_CE_PLL_VCO_DIV_2 | \ - HRCWL_CE_TO_PLL_1X6) - -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_CORE_ENABLE | \ - HRCWH_FROM_0X00000100 | \ - HRCWH_BOOTSEQ_DISABLE | \ - HRCWH_SW_WATCHDOG_DISABLE | \ - HRCWH_ROM_LOC_LOCAL_16BIT | \ - HRCWH_BIG_ENDIAN | \ - HRCWH_LALE_EARLY | \ - HRCWH_LDP_CLEAR) - -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f -#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \ - SDRAM_CFG_SREN) -#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 -#define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) -#define CONFIG_SYS_DDR_INTERVAL ((0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ - (0x3cf << SDRAM_INTERVAL_REFINT_SHIFT)) - -#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ - CSCONFIG_ROW_BIT_13 | \ - CSCONFIG_COL_BIT_10 | \ - CSCONFIG_ODT_WR_ONLY_CURRENT) - -#define CONFIG_SYS_DDRCDR (DDRCDR_EN | DDRCDR_Q_DRN) - /* 0x40000001 */ -#define CONFIG_SYS_DDR_MODE 0x47860452 -#define CONFIG_SYS_DDR_MODE2 0x8080c000 - -#define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \ - (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \ - (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \ - (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \ - (0 << TIMING_CFG0_WWT_SHIFT) | \ - (0 << TIMING_CFG0_RRT_SHIFT) | \ - (0 << TIMING_CFG0_WRT_SHIFT) | \ - (0 << TIMING_CFG0_RWT_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \ - (2 << TIMING_CFG1_WRTORD_SHIFT) | \ - (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ - (3 << TIMING_CFG1_WRREC_SHIFT) | \ - (7 << TIMING_CFG1_REFREC_SHIFT) | \ - (3 << TIMING_CFG1_ACTTORW_SHIFT) | \ - (8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ - (3 << TIMING_CFG1_PRETOACT_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \ - (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \ - (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \ - (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \ - (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \ - (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \ - (5 << TIMING_CFG2_CPO_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 - -/* PRIO FPGA */ -#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000 -#define CONFIG_SYS_KMBEC_FPGA_SIZE 128 -/* PAXE FPGA */ -#define CONFIG_SYS_PAXE_BASE 0xA0000000 -#define CONFIG_SYS_PAXE_SIZE 512 - -/* EEprom support */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 - -/* - * Local Bus Configuration & Clock Setup - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_EADC LCRR_EADC_2 -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 - -/* - * Init Local Bus Memory Controller: - * - * Bank Bus Machine PortSz Size Device - * ---- --- ------- ------ ----- ------ - * 3 Local GPCM 8 bit 512MB PAXE - * - */ - -/* - * PAXE on the local bus CS3 - */ -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PAXE_BASE -#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_512MB) - -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_PAXE_BASE | \ - BR_PS_8 | /* 8 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) -#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_PAXE_SIZE) | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) - -/* - * MMU Setup - */ - -/* PAXE: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_RW | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_PAXE_BASE | BATU_BL_256M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_RW | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#define CONFIG_SYS_IBAT6L (0) -#define CONFIG_SYS_IBAT6U (0) -#define CONFIG_SYS_IBAT7L (0) -#define CONFIG_SYS_IBAT7U (0) -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U - -#endif /* __CONFIG_H */