From: Marek Vasut Date: Sun, 12 Apr 2020 21:01:45 +0000 (+0200) Subject: net: rtl8139: Finish cleanup X-Git-Url: http://git.dujemihanovic.xyz/img/static/gitweb.css?a=commitdiff_plain;h=0e5a4117a58b8d47b502d7e5536ca6b36d568806;p=u-boot.git net: rtl8139: Finish cleanup Finish the checkpatch cleanup of the driver, fix the remaining issues in probe and init function and in global variables, rename the probe function to rtl8139_init(), no functional change. Signed-off-by: Marek Vasut Cc: Joe Hershberger --- diff --git a/drivers/net/rtl8139.c b/drivers/net/rtl8139.c index 68ef9eea25..b901e3a79b 100644 --- a/drivers/net/rtl8139.c +++ b/drivers/net/rtl8139.c @@ -8,68 +8,67 @@ */ /* rtl8139.c - etherboot driver for the Realtek 8139 chipset - - ported from the linux driver written by Donald Becker - by Rainer Bawidamann (Rainer.Bawidamann@informatik.uni-ulm.de) 1999 - - This software may be used and distributed according to the terms - of the GNU Public License, incorporated herein by reference. - - changes to the original driver: - - removed support for interrupts, switching to polling mode (yuck!) - - removed support for the 8129 chip (external MII) - -*/ + * + * ported from the linux driver written by Donald Becker + * by Rainer Bawidamann (Rainer.Bawidamann@informatik.uni-ulm.de) 1999 + * + * This software may be used and distributed according to the terms + * of the GNU Public License, incorporated herein by reference. + * + * changes to the original driver: + * - removed support for interrupts, switching to polling mode (yuck!) + * - removed support for the 8129 chip (external MII) + */ /*********************************************************************/ /* Revision History */ /*********************************************************************/ /* - 28 Dec 2002 ken_yap@users.sourceforge.net (Ken Yap) - Put in virt_to_bus calls to allow Etherboot relocation. - - 06 Apr 2001 ken_yap@users.sourceforge.net (Ken Yap) - Following email from Hyun-Joon Cha, added a disable routine, otherwise - NIC remains live and can crash the kernel later. - - 4 Feb 2000 espenlaub@informatik.uni-ulm.de (Klaus Espenlaub) - Shuffled things around, removed the leftovers from the 8129 support - that was in the Linux driver and added a bit more 8139 definitions. - Moved the 8K receive buffer to a fixed, available address outside the - 0x98000-0x9ffff range. This is a bit of a hack, but currently the only - way to make room for the Etherboot features that need substantial amounts - of code like the ANSI console support. Currently the buffer is just below - 0x10000, so this even conforms to the tagged boot image specification, - which reserves the ranges 0x00000-0x10000 and 0x98000-0xA0000. My - interpretation of this "reserved" is that Etherboot may do whatever it - likes, as long as its environment is kept intact (like the BIOS - variables). Hopefully fixed rtl8139_recv() once and for all. The symptoms - were that if Etherboot was left at the boot menu for several minutes, the - first eth_poll failed. Seems like I am the only person who does this. - First of all I fixed the debugging code and then set out for a long bug - hunting session. It took me about a week full time work - poking around - various places in the driver, reading Don Becker's and Jeff Garzik's Linux - driver and even the FreeBSD driver (what a piece of crap!) - and - eventually spotted the nasty thing: the transmit routine was acknowledging - each and every interrupt pending, including the RxOverrun and RxFIFIOver - interrupts. This confused the RTL8139 thoroughly. It destroyed the - Rx ring contents by dumping the 2K FIFO contents right where we wanted to - get the next packet. Oh well, what fun. - - 18 Jan 2000 mdc@thinguin.org (Marty Connor) - Drastically simplified error handling. Basically, if any error - in transmission or reception occurs, the card is reset. - Also, pointed all transmit descriptors to the same buffer to - save buffer space. This should decrease driver size and avoid - corruption because of exceeding 32K during runtime. - - 28 Jul 1999 (Matthias Meixner - meixner@rbg.informatik.tu-darmstadt.de) - rtl8139_recv was quite broken: it used the RxOK interrupt flag instead - of the RxBufferEmpty flag which often resulted in very bad - transmission performace - below 1kBytes/s. - -*/ + * 28 Dec 2002 ken_yap@users.sourceforge.net (Ken Yap) + * Put in virt_to_bus calls to allow Etherboot relocation. + * + * 06 Apr 2001 ken_yap@users.sourceforge.net (Ken Yap) + * Following email from Hyun-Joon Cha, added a disable routine, otherwise + * NIC remains live and can crash the kernel later. + * + * 4 Feb 2000 espenlaub@informatik.uni-ulm.de (Klaus Espenlaub) + * Shuffled things around, removed the leftovers from the 8129 support + * that was in the Linux driver and added a bit more 8139 definitions. + * Moved the 8K receive buffer to a fixed, available address outside the + * 0x98000-0x9ffff range. This is a bit of a hack, but currently the only + * way to make room for the Etherboot features that need substantial amounts + * of code like the ANSI console support. Currently the buffer is just below + * 0x10000, so this even conforms to the tagged boot image specification, + * which reserves the ranges 0x00000-0x10000 and 0x98000-0xA0000. My + * interpretation of this "reserved" is that Etherboot may do whatever it + * likes, as long as its environment is kept intact (like the BIOS + * variables). Hopefully fixed rtl8139_recv() once and for all. The symptoms + * were that if Etherboot was left at the boot menu for several minutes, the + * first eth_poll failed. Seems like I am the only person who does this. + * First of all I fixed the debugging code and then set out for a long bug + * hunting session. It took me about a week full time work - poking around + * various places in the driver, reading Don Becker's and Jeff Garzik's Linux + * driver and even the FreeBSD driver (what a piece of crap!) - and + * eventually spotted the nasty thing: the transmit routine was acknowledging + * each and every interrupt pending, including the RxOverrun and RxFIFIOver + * interrupts. This confused the RTL8139 thoroughly. It destroyed the + * Rx ring contents by dumping the 2K FIFO contents right where we wanted to + * get the next packet. Oh well, what fun. + * + * 18 Jan 2000 mdc@thinguin.org (Marty Connor) + * Drastically simplified error handling. Basically, if any error + * in transmission or reception occurs, the card is reset. + * Also, pointed all transmit descriptors to the same buffer to + * save buffer space. This should decrease driver size and avoid + * corruption because of exceeding 32K during runtime. + * + * 28 Jul 1999 (Matthias Meixner - meixner@rbg.informatik.tu-darmstadt.de) + * rtl8139_recv was quite broken: it used the RxOK interrupt flag instead + * of the RxBufferEmpty flag which often resulted in very bad + * transmission performace - below 1kBytes/s. + * + */ #include #include @@ -82,8 +81,8 @@ #define RTL_TIMEOUT 100000 -/* PCI Tuning Parameters - Threshold is bytes transferred to chip before transmission starts. */ +/* PCI Tuning Parameters */ +/* Threshold is bytes transferred to chip before transmission starts. */ #define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */ #define RX_FIFO_THRESH 4 /* Rx buffer level before first PCI xfer. */ #define RX_DMA_BURST 4 /* Maximum PCI burst, '4' is 256 bytes */ @@ -192,13 +191,13 @@ #define RTL_STS_RXSTATUSOK BIT(0) static int ioaddr; -static unsigned int cur_rx,cur_tx; +static unsigned int cur_rx, cur_tx; /* The RTL8139 can only transmit from a contiguous, aligned memory block. */ -static unsigned char tx_buffer[TX_BUF_SIZE] __attribute__((aligned(4))); -static unsigned char rx_ring[RX_BUF_LEN+16] __attribute__((aligned(4))); +static unsigned char tx_buffer[TX_BUF_SIZE] __aligned(4); +static unsigned char rx_ring[RX_BUF_LEN + 16] __aligned(4); -static int rtl8139_probe(struct eth_device *dev, bd_t *bis); +static int rtl8139_init(struct eth_device *dev, bd_t *bis); static int rtl8139_read_eeprom(unsigned int location, unsigned int addr_len); static void rtl8139_reset(struct eth_device *dev); static int rtl8139_send(struct eth_device *dev, void *packet, int length); @@ -206,82 +205,84 @@ static int rtl8139_recv(struct eth_device *dev); static void rtl8139_stop(struct eth_device *dev); static int rtl_bcast_addr(struct eth_device *dev, const u8 *bcast_mac, int join) { - return (0); + return 0; } static struct pci_device_id supported[] = { - {PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139}, - {PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_8139}, - {} + { PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139 }, + { PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_8139 }, + { } }; int rtl8139_initialize(bd_t *bis) { - pci_dev_t devno; - int card_number = 0; struct eth_device *dev; + int card_number = 0; + pci_dev_t devno; + int idx = 0; u32 iobase; - int idx=0; - while(1){ + while (1) { /* Find RTL8139 */ - if ((devno = pci_find_devices(supported, idx++)) < 0) + devno = pci_find_devices(supported, idx++); + if (devno < 0) break; pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase); iobase &= ~0xf; - debug ("rtl8139: REALTEK RTL8139 @0x%x\n", iobase); + debug("rtl8139: REALTEK RTL8139 @0x%x\n", iobase); - dev = (struct eth_device *)malloc(sizeof *dev); + dev = (struct eth_device *)malloc(sizeof(*dev)); if (!dev) { printf("Can not allocate memory of rtl8139\n"); break; } memset(dev, 0, sizeof(*dev)); - sprintf (dev->name, "RTL8139#%d", card_number); + sprintf(dev->name, "RTL8139#%d", card_number); - dev->priv = (void *) devno; + dev->priv = (void *)devno; dev->iobase = (int)bus_to_phys(iobase); - dev->init = rtl8139_probe; + dev->init = rtl8139_init; dev->halt = rtl8139_stop; dev->send = rtl8139_send; dev->recv = rtl8139_recv; dev->mcast = rtl_bcast_addr; - eth_register (dev); + eth_register(dev); card_number++; - pci_write_config_byte (devno, PCI_LATENCY_TIMER, 0x20); + pci_write_config_byte(devno, PCI_LATENCY_TIMER, 0x20); - udelay (10 * 1000); + udelay(10 * 1000); } return card_number; } -static int rtl8139_probe(struct eth_device *dev, bd_t *bis) +static int rtl8139_init(struct eth_device *dev, bd_t *bis) { - int i; - int addr_len; unsigned short *ap = (unsigned short *)dev->enetaddr; + int addr_len, i; + u8 reg; ioaddr = dev->iobase; /* Bring the chip out of low-power mode. */ outb(0x00, ioaddr + RTL_REG_CONFIG1); - addr_len = rtl8139_read_eeprom(0,8) == 0x8129 ? 8 : 6; + addr_len = rtl8139_read_eeprom(0, 8) == 0x8129 ? 8 : 6; for (i = 0; i < 3; i++) - *ap++ = le16_to_cpu (rtl8139_read_eeprom(i + 7, addr_len)); + *ap++ = le16_to_cpu(rtl8139_read_eeprom(i + 7, addr_len)); rtl8139_reset(dev); - if (inb(ioaddr + RTL_REG_MEDIASTATUS) & RTL_REG_MEDIASTATUS_MSRLINKFAIL) { + reg = inb(ioaddr + RTL_REG_MEDIASTATUS); + if (reg & RTL_REG_MEDIASTATUS_MSRLINKFAIL) { printf("Cable not connected or other link failure\n"); - return -1 ; + return -1; } return 0;