]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
sunxi: Add defconfig for the Sinovoip BPI-M2 board
authorHans de Goede <hdegoede@redhat.com>
Tue, 13 Oct 2015 21:57:03 +0000 (23:57 +0200)
committerHans de Goede <hdegoede@redhat.com>
Tue, 20 Oct 2015 16:40:28 +0000 (18:40 +0200)
The Sinovoip BPI-M2 is a SBC board based on the A31s SoC it features
1G RAM, a microsd slot, Gbit ethernet, 4 usb-a USB-2 ports, ir receiver,
stereo headphone jack and hdmi video output.

The dts changes are identical to the dts files submitted upstream.

A few notes on the use if dldo and aldo regulators. DLDO1 is used
for Vdd for the ethernet phy, ALDO2 is used for AVdd for the ethernet
phy. ALDO1 is used to power the sdio wifi module.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
arch/arm/dts/Makefile
arch/arm/dts/sun6i-a31.dtsi
arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts [new file with mode: 0644]
board/sunxi/MAINTAINERS
configs/Sinovoip_BPI_M2_defconfig [new file with mode: 0644]

index fb953ebd53ee51f35a8690ba7effcc10f13949d6..8cd282b14898be162b749851cc47dbed5d431d75 100644 (file)
@@ -123,7 +123,8 @@ dtb-$(CONFIG_MACH_SUN6I) += \
        sun6i-a31-mele-a1000g-quad.dtb \
        sun6i-a31-mixtile-loftq.dtb \
        sun6i-a31s-cs908.dtb \
-       sun6i-a31s-primo81.dtb
+       sun6i-a31s-primo81.dtb \
+       sun6i-a31s-sinovoip-bpi-m2.dtb
 dtb-$(CONFIG_MACH_SUN7I) += \
        sun7i-a20-ainol-aw1.dtb \
        sun7i-a20-bananapi.dtb \
index 39953e76bbfcfc1aa67c1d58d8bae9061b1ede10..44f889fcc90d97bc1e907dd7c5164e84c1d921eb 100644 (file)
                                allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
                        };
 
+                       mmc2_pins_a: mmc2@0 {
+                               allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+                                                "PC10", "PC11";
+                               allwinner,function = "mmc2";
+                               allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+                       };
+
+                       mmc2_8bit_emmc_pins: mmc2@1 {
+                               allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+                                                "PC10", "PC11", "PC12",
+                                                "PC13", "PC14", "PC15",
+                                                "PC24";
+                               allwinner,function = "mmc2";
+                               allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+                       };
+
                        gmac_pins_mii_a: gmac_mii@0 {
                                allwinner,pins = "PA0", "PA1", "PA2", "PA3",
                                                "PA8", "PA9", "PA11",
diff --git a/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts
new file mode 100644 (file)
index 0000000..db7fa13
--- /dev/null
@@ -0,0 +1,194 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+       model = "Sinovoip BPI-M2";
+       compatible = "sinovoip,bpi-m2", "allwinner,sun6i-a31s";
+
+       aliases {
+               serial0 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pins_bpi_m2>;
+
+               blue {
+                       label = "bpi-m2:blue:usr";
+                       gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+               };
+
+               green {
+                       label = "bpi-m2:green:usr";
+                       gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
+               };
+
+               red {
+                       label = "bpi-m2:red:usr";
+                       gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */
+               };
+       };
+
+       mmc2_pwrseq: mmc2_pwrseq {
+               compatible = "mmc-pwrseq-simple";
+               pinctrl-names = "default";
+               pinctrl-0 = <&mmc2_pwrseq_pin_bpi_m2>;
+               reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */
+       };
+};
+
+&ehci0 {
+       status = "okay";
+};
+
+&gmac {
+       pinctrl-names = "default";
+       pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>;
+       phy = <&phy1>;
+       phy-mode = "rgmii";
+       snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
+       snps,reset-active-low;
+       snps,reset-delays-us = <0 10000 30000>;
+       status = "okay";
+
+       phy1: ethernet-phy@1 {
+               reg = <1>;
+       };
+};
+
+&ir {
+       pinctrl-names = "default";
+       pinctrl-0 = <&ir_pins_a>;
+       status = "okay";
+};
+
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>;
+       vmmc-supply = <&reg_vcc3v0>;
+       bus-width = <4>;
+       cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
+       cd-inverted;
+       status = "okay";
+};
+
+&mmc0_pins_a {
+       allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&mmc2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc2_pins_a>;
+       vmmc-supply = <&reg_vcc3v0>;
+       mmc-pwrseq = <&mmc2_pwrseq>;
+       bus-width = <4>;
+       non-removable;
+       status = "okay";
+
+       brcmf: bcrmf@1 {
+               reg = <1>;
+               compatible = "brcm,bcm4329-fmac";
+               interrupt-parent = <&r_pio>;
+               interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */
+               interrupt-names = "host-wake";
+       };
+};
+
+&mmc2_pins_a {
+       allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+       status = "okay";
+};
+
+&pio {
+       gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 {
+               allwinner,pins = "PA21";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+
+       led_pins_bpi_m2: led_pins@0 {
+               allwinner,pins = "PG5", "PG10", "PG11";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+
+       mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 {
+               allwinner,pins = "PA4";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+       };
+};
+
+&r_pio {
+       mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 {
+               allwinner,pins = "PL8";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins_a>;
+       status = "okay";
+};
+
+&usbphy {
+       status = "okay";
+};
index dd27487e741a0925fcc126d6f721b54ccf74c3e4..99f29d3e9b816563d993f537c9d8414c602b7520 100644 (file)
@@ -34,6 +34,7 @@ F:    include/configs/sun6i.h
 F:     configs/CSQ_CS908_defconfig
 F:     configs/Mele_A1000G_quad_defconfig
 F:     configs/Mele_M9_defconfig
+F:     configs/Sinovoip_BPI_M2_defconfig
 F:     include/configs/sun7i.h
 F:     configs/A20-OLinuXino_MICRO_defconfig
 F:     configs/Bananapi_defconfig
diff --git a/configs/Sinovoip_BPI_M2_defconfig b/configs/Sinovoip_BPI_M2_defconfig
new file mode 100644 (file)
index 0000000..17c30a8
--- /dev/null
@@ -0,0 +1,18 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN6I=y
+CONFIG_DRAM_CLK=432
+CONFIG_USB1_VBUS_PIN=""
+CONFIG_USB2_VBUS_PIN=""
+CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-sinovoip-bpi-m2"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_AXP_DLDO1_VOLT=3000
+CONFIG_AXP_ALDO1_VOLT=3300
+CONFIG_AXP_ALDO2_VOLT=1800
+CONFIG_USB_EHCI_HCD=y