Migrate PX30/RK3326 boards that exists in Linux v6.8 to use OF_UPSTREAM.
firefly-px30 is not migrated to OF_UPSTREAM because there's no Device
Tree in the Linux kernel.
Differences between U-Boot's Odroid-Go2 and Linux's are now moved to the
-u-boot.dtsi, though I have a gut feeling that the existing cru
overrides aren't necessary (anymore?).
The U-Boot GPIO led-0 is on GPIO0_C1 but such is the pin of PWM3 which
is used for Linux's PWM led-2 so keep Linux's.
I also doubt vcc_cam is actually used, though the Odroid-Go2 Black
Edition uses this dcdc regulator for WiFi, so let's just move it to the
-u-boot.dtsi to play it safe.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
dtb-$(CONFIG_MACH_S700) += \
s700-cubieboard7.dtb
-dtb-$(CONFIG_ROCKCHIP_PX30) += \
- px30-evb.dtb \
- px30-firefly.dtb \
- px30-engicam-px30-core-ctouch2.dtb \
- px30-engicam-px30-core-ctouch2-of10.dtb \
- px30-engicam-px30-core-edimm2.2.dtb \
- rk3326-odroid-go2.dtb
-
dtb-$(CONFIG_ROCKCHIP_RK3036) += \
rk3036-sdk.dtb
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutions
- * Copyright (c) 2020 Amarula Solutions(India)
- */
-
-/ {
- aliases {
- mmc1 = &sdmmc;
- mmc2 = &sdio;
- };
-
- vcc5v0_sys: vcc5v0-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys"; /* +5V */
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&xin32k>;
- clock-names = "ext_clock";
- post-power-on-delay-ms = <80>;
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h>;
- };
-
- vcc3v3_btreg: vcc3v3-btreg {
- compatible = "regulator-gpio";
- enable-active-high;
- pinctrl-names = "default";
- pinctrl-0 = <&bt_enable_h>;
- regulator-name = "btreg-gpio-supply";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- states = <3300000 0x0>;
- };
-
- vcc3v3_rf_aux_mod: vcc3v3-rf-aux-mod {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_rf_aux_mod";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
- };
-
- xin32k: xin32k {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "xin32k";
- };
-};
-
-&sdio {
- #address-cells = <1>;
- #size-cells = <0>;
- bus-width = <4>;
- clock-frequency = <50000000>;
- cap-sdio-irq;
- cap-sd-highspeed;
- keep-power-in-suspend;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- sd-uhs-sdr104;
- status = "okay";
-
- brcmf: wifi@1 {
- compatible = "brcm,bcm4329-fmac";
- reg = <1>;
- };
-};
-
-&gmac {
- clock_in_out = "output";
- phy-supply = <&vcc_3v3>; /* +3V3_SOM */
- snps,reset-active-low;
- snps,reset-delays-us = <0 50000 50000>;
- snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&sdmmc {
- cap-sd-highspeed;
- card-detect-delay = <800>;
- vmmc-supply = <&vcc_3v3>; /* +3V3_SOM */
- vqmmc-supply = <&vcc_3v3>;
- status = "okay";
-};
-
-&u2phy {
- status = "okay";
-
- u2phy_host: host-port {
- status = "okay";
- };
-
- u2phy_otg: otg-port {
- status = "okay";
- };
-};
-
-&uart2 {
- pinctrl-0 = <&uart2m1_xfer>;
- status = "okay";
-};
-
-&usb20_otg {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutions
- * Copyright (c) 2020 Amarula Solutions(India)
- */
-
-#include "px30-engicam-common.dtsi"
-
-&pinctrl {
- bt {
- bt_enable_h: bt-enable-h {
- rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- sdio-pwrseq {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&sdio_pwrseq {
- reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
-};
-
-&vcc3v3_btreg {
- enable-gpio = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutions(India)
- */
-
-#include "px30-engicam-common.dtsi"
-
-/ {
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm0 0 25000 0>;
- };
-
- panel {
- compatible = "yes-optoelectronics,ytc700tlag-05-201c";
- backlight = <&backlight>;
- data-mapping = "vesa-24";
- power-supply = <&vcc3v3_lcd>;
-
- port {
- panel_in_lvds: endpoint {
- remote-endpoint = <&lvds_out_panel>;
- };
- };
- };
-};
-
-&display_subsystem {
- status = "okay";
-};
-
-&dsi_dphy {
- status = "okay";
-};
-
-/* LVDS_B(secondary) */
-&lvds {
- status = "okay";
-
- ports {
- port@1 {
- reg = <1>;
-
- lvds_out_panel: endpoint {
- remote-endpoint = <&panel_in_lvds>;
- };
- };
- };
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutions(India)
- */
-
-/dts-v1/;
-#include "px30.dtsi"
-#include "px30-engicam-ctouch2.dtsi"
-#include "px30-engicam-px30-core.dtsi"
-
-/ {
- model = "Engicam PX30.Core C.TOUCH 2.0 10.1\" Open Frame";
- compatible = "engicam,px30-core-ctouch2-of10", "engicam,px30-core",
- "rockchip,px30";
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm0 0 25000 0>;
- };
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- panel {
- compatible = "ampire,am-1280800n3tzqw-t00h";
- backlight = <&backlight>;
- power-supply = <&vcc3v3_lcd>;
- data-mapping = "vesa-24";
-
- port {
- panel_in_lvds: endpoint {
- remote-endpoint = <&lvds_out_panel>;
- };
- };
- };
-};
-
-&display_subsystem {
- status = "okay";
-};
-
-&dsi_dphy {
- status = "okay";
-};
-
-&lvds {
- status = "okay";
-
- ports {
- port@1 {
- reg = <1>;
-
- lvds_out_panel: endpoint {
- remote-endpoint = <&panel_in_lvds>;
- };
- };
- };
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutions
- * Copyright (c) 2020 Amarula Solutions(India)
- */
-
-/dts-v1/;
-#include "px30.dtsi"
-#include "px30-engicam-ctouch2.dtsi"
-#include "px30-engicam-px30-core.dtsi"
-
-/ {
- model = "Engicam PX30.Core C.TOUCH 2.0";
- compatible = "engicam,px30-core-ctouch2", "engicam,px30-core",
- "rockchip,px30";
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutions(India)
- */
-
-/dts-v1/;
-#include "px30.dtsi"
-#include "px30-engicam-edimm2.2.dtsi"
-#include "px30-engicam-px30-core.dtsi"
-
-/ {
- model = "Engicam PX30.Core EDIMM2.2 Starter Kit";
- compatible = "engicam,px30-core-edimm2.2", "engicam,px30-core",
- "rockchip,px30";
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-};
-
-&pinctrl {
- bt {
- bt_enable_h: bt-enable-h {
- rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- sdio-pwrseq {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&sdio_pwrseq {
- reset-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_LOW>;
-};
-
-&vcc3v3_btreg {
- enable-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutons
- * Copyright (c) 2020 Amarula Solutons(India)
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-
-/ {
- compatible = "engicam,px30-core", "rockchip,px30";
-
- aliases {
- mmc0 = &emmc;
- };
-};
-
-&cpu0 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cpu1 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cpu2 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cpu3 {
- cpu-supply = <&vdd_arm>;
-};
-
-&emmc {
- cap-mmc-highspeed;
- mmc-hs200-1_8v;
- non-removable;
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- rk809: pmic@20 {
- compatible = "rockchip,rk809";
- reg = <0x20>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int>;
- rockchip,system-power-controller;
- wakeup-source;
- #clock-cells = <1>;
- clock-output-names = "rk808-clkout1", "rk808-clkout2";
-
- vcc1-supply = <&vcc5v0_sys>;
- vcc2-supply = <&vcc5v0_sys>;
- vcc3-supply = <&vcc5v0_sys>;
- vcc4-supply = <&vcc5v0_sys>;
- vcc5-supply = <&vcc3v3_sys>;
- vcc6-supply = <&vcc3v3_sys>;
- vcc7-supply = <&vcc3v3_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc5v0_sys>;
-
- regulators {
- vdd_log: DCDC_REG1 {
- regulator-name = "vdd_log";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <950000>;
- };
- };
-
- vdd_arm: DCDC_REG2 {
- regulator-name = "vdd_arm";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <950000>;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_3v3: DCDC_REG4 {
- regulator-name = "vcc_3v3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc3v3_sys: DCDC_REG5 {
- regulator-name = "vcc3v3_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_1v0: LDO_REG1 {
- regulator-name = "vcc_1v0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_1v8: LDO_REG2 {
- regulator-name = "vcc_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vdd_1v0: LDO_REG3 {
- regulator-name = "vdd_1v0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc3v0_pmu: LDO_REG4 {
- regulator-name = "vcc3v0_pmu";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
-
- };
- };
-
- vccio_sd: LDO_REG5 {
- regulator-name = "vccio_sd";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc3v3_lcd: SWITCH_REG1 {
- regulator-boot-on;
- regulator-name = "vcc3v3_lcd";
- };
-
- vcc5v0_host: SWITCH_REG2 {
- regulator-name = "vcc5v0_host";
- regulator-always-on;
- regulator-boot-on;
- };
- };
- };
-};
-
-&io_domains {
- vccio1-supply = <&vcc_3v3>;
- vccio2-supply = <&vcc_3v3>;
- vccio3-supply = <&vcc_3v3>;
- vccio4-supply = <&vcc_3v3>;
- vccio5-supply = <&vcc_3v3>;
- vccio6-supply = <&vcc_1v8>;
- status = "okay";
-};
-
-&pinctrl {
- pmic {
- pmic_int: pmic_int {
- rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-};
-
-&pmu_io_domains {
- pmuio1-supply = <&vcc_3v3>;
- pmuio2-supply = <&vcc_3v3>;
- status = "okay";
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <1>;
- rockchip,hw-tshut-polarity = <1>;
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include "px30.dtsi"
-
-/ {
- model = "Rockchip PX30 EVB";
- compatible = "rockchip,px30-evb", "rockchip,px30";
-
- aliases {
- mmc0 = &sdmmc;
- mmc1 = &sdio;
- mmc2 = &emmc;
- };
-
- chosen {
- stdout-path = "serial5:115200n8";
- };
-
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 2>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1800000>;
- poll-interval = <100>;
-
- esc-key {
- label = "esc";
- linux,code = <KEY_ESC>;
- press-threshold-microvolt = <1310000>;
- };
-
- home-key {
- label = "home";
- linux,code = <KEY_HOME>;
- press-threshold-microvolt = <624000>;
- };
-
- menu-key {
- label = "menu";
- linux,code = <KEY_MENU>;
- press-threshold-microvolt = <987000>;
- };
-
- vol-down-key {
- label = "volume down";
- linux,code = <KEY_VOLUMEDOWN>;
- press-threshold-microvolt = <300000>;
- };
-
- vol-up-key {
- label = "volume up";
- linux,code = <KEY_VOLUMEUP>;
- press-threshold-microvolt = <17000>;
- };
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm1 0 25000 0>;
- power-supply = <&vcc3v3_lcd>;
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- pinctrl-0 = <&emmc_reset>;
- pinctrl-names = "default";
- reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h>;
-
- /*
- * On the module itself this is one of these (depending
- * on the actual card populated):
- * - SDIO_RESET_L_WL_REG_ON
- * - PDN (power down when low)
- */
- reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
- };
-
- vcc5v0_sys: vccsys {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-};
-
-&cpu0 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cpu1 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cpu2 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cpu3 {
- cpu-supply = <&vdd_arm>;
-};
-
-&csi_dphy {
- status = "okay";
-};
-
-&display_subsystem {
- status = "okay";
-};
-
-&dsi {
- status = "okay";
-
- ports {
- mipi_out: port@1 {
- reg = <1>;
-
- mipi_out_panel: endpoint {
- remote-endpoint = <&mipi_in_panel>;
- };
- };
- };
-
- panel@0 {
- compatible = "xinpeng,xpp055c272";
- reg = <0>;
- backlight = <&backlight>;
- iovcc-supply = <&vcc_1v8>;
- vci-supply = <&vcc3v3_lcd>;
-
- port {
- mipi_in_panel: endpoint {
- remote-endpoint = <&mipi_out_panel>;
- };
- };
- };
-};
-
-&dsi_dphy {
- status = "okay";
-};
-
-&emmc {
- cap-mmc-highspeed;
- mmc-hs200-1_8v;
- non-removable;
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vcc_3v0>;
- vqmmc-supply = <&vccio_flash>;
- status = "okay";
-};
-
-&gmac {
- clock_in_out = "output";
- phy-supply = <&vcc_rmii>;
- snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 50000 50000>;
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&vdd_log>;
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- rk809: pmic@20 {
- compatible = "rockchip,rk809";
- reg = <0x20>;
- interrupt-parent = <&gpio0>;
- interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int>;
- rockchip,system-power-controller;
- wakeup-source;
- #clock-cells = <0>;
- clock-output-names = "xin32k";
-
- vcc1-supply = <&vcc5v0_sys>;
- vcc2-supply = <&vcc5v0_sys>;
- vcc3-supply = <&vcc5v0_sys>;
- vcc4-supply = <&vcc5v0_sys>;
- vcc5-supply = <&vcc3v3_sys>;
- vcc6-supply = <&vcc3v3_sys>;
- vcc7-supply = <&vcc3v3_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc5v0_sys>;
-
- regulators {
- vdd_log: DCDC_REG1 {
- regulator-name = "vdd_log";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <950000>;
- };
- };
-
- vdd_arm: DCDC_REG2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <950000>;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_3v0: vcc_rmii: DCDC_REG4 {
- regulator-name = "vcc_3v0";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc3v3_sys: DCDC_REG5 {
- regulator-name = "vcc3v3_sys";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_1v0: LDO_REG1 {
- regulator-name = "vcc_1v0";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_1v8: vccio_flash: vccio_sdio: LDO_REG2 {
- regulator-name = "vcc_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vdd_1v0: LDO_REG3 {
- regulator-name = "vdd_1v0";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc3v0_pmu: LDO_REG4 {
- regulator-name = "vcc3v0_pmu";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vccio_sd: LDO_REG5 {
- regulator-name = "vccio_sd";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_sd: LDO_REG6 {
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc2v8_dvp: LDO_REG7 {
- regulator-name = "vcc2v8_dvp";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <2800000>;
- };
- };
-
- vcc1v8_dvp: LDO_REG8 {
- regulator-name = "vcc1v8_dvp";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc1v5_dvp: LDO_REG9 {
- regulator-name = "vcc1v5_dvp";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcc3v3_lcd: SWITCH_REG1 {
- regulator-name = "vcc3v3_lcd";
- regulator-boot-on;
- };
-
- vcc5v0_host: SWITCH_REG2 {
- regulator-name = "vcc5v0_host";
- regulator-always-on;
- regulator-boot-on;
- };
- };
- };
-};
-
-&i2c1 {
- status = "okay";
-
- sensor@d {
- compatible = "asahi-kasei,ak8963";
- reg = <0x0d>;
- gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
- vdd-supply = <&vcc3v0_pmu>;
- mount-matrix = "1", /* x0 */
- "0", /* y0 */
- "0", /* z0 */
- "0", /* x1 */
- "1", /* y1 */
- "0", /* z1 */
- "0", /* x2 */
- "0", /* y2 */
- "1"; /* z2 */
- };
-
- touchscreen@14 {
- compatible = "goodix,gt1151";
- reg = <0x14>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
- irq-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
- reset-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
- VDDIO-supply = <&vcc3v3_lcd>;
- };
-
- sensor@4c {
- compatible = "fsl,mma7660";
- reg = <0x4c>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&i2c2 {
- status = "okay";
-
- clock-frequency = <100000>;
-
- /* These are relatively safe rise/fall times; TODO: measure */
- i2c-scl-falling-time-ns = <50>;
- i2c-scl-rising-time-ns = <300>;
-
- ov5695: ov5695@36 {
- compatible = "ovti,ov5695";
- reg = <0x36>;
- avdd-supply = <&vcc2v8_dvp>;
- clocks = <&cru SCLK_CIF_OUT>;
- clock-names = "xvclk";
- dvdd-supply = <&vcc1v5_dvp>;
- dovdd-supply = <&vcc1v8_dvp>;
- pinctrl-names = "default";
- pinctrl-0 = <&cif_clkout_m0>;
- reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
-
- port {
- ucam_out: endpoint {
- remote-endpoint = <&mipi_in_ucam>;
- data-lanes = <1 2>;
- };
- };
- };
-};
-
-&i2s1_2ch {
- status = "okay";
-};
-
-&io_domains {
- status = "okay";
-
- vccio1-supply = <&vccio_sdio>;
- vccio2-supply = <&vccio_sd>;
- vccio3-supply = <&vcc_3v0>;
- vccio4-supply = <&vcc3v0_pmu>;
- vccio5-supply = <&vcc_3v0>;
- vccio6-supply = <&vccio_flash>;
-};
-
-&isp {
- status = "okay";
-
- ports {
- port@0 {
- mipi_in_ucam: endpoint@0 {
- reg = <0>;
- data-lanes = <1 2>;
- remote-endpoint = <&ucam_out>;
- };
- };
- };
-};
-
-&isp_mmu {
- status = "okay";
-};
-
-&pinctrl {
- headphone {
- hp_det: hp-det {
- rockchip,pins =
- <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- emmc {
- emmc_reset: emmc-reset {
- rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int: pmic_int {
- rockchip,pins =
- <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- soc_slppin_gpio: soc_slppin_gpio {
- rockchip,pins =
- <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
- };
-
- soc_slppin_slp: soc_slppin_slp {
- rockchip,pins =
- <0 RK_PA4 1 &pcfg_pull_none>;
- };
-
- soc_slppin_rst: soc_slppin_rst {
- rockchip,pins =
- <0 RK_PA4 2 &pcfg_pull_none>;
- };
- };
-
- sdio-pwrseq {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins =
- <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pmu_io_domains {
- status = "okay";
-
- pmuio1-supply = <&vcc3v0_pmu>;
- pmuio2-supply = <&vcc3v0_pmu>;
-};
-
-&pwm1 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcc_1v8>;
- status = "okay";
-};
-
-&sdmmc {
- cap-mmc-highspeed;
- cap-sd-highspeed;
- card-detect-delay = <800>;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- vmmc-supply = <&vcc_sd>;
- vqmmc-supply = <&vccio_sd>;
- status = "okay";
-};
-
-&sdio {
- cap-sd-highspeed;
- keep-power-in-suspend;
- non-removable;
- mmc-pwrseq = <&sdio_pwrseq>;
- sd-uhs-sdr104;
- status = "okay";
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <1>;
- rockchip,hw-tshut-polarity = <1>;
- status = "okay";
-};
-
-&u2phy {
- status = "okay";
-
- u2phy_host: host-port {
- status = "okay";
- };
-
- u2phy_otg: otg-port {
- status = "okay";
- };
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_xfer &uart1_cts>;
- status = "okay";
-};
-
-&uart5 {
- status = "okay";
-};
-
-&usb20_otg {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
- */
-
-/dts-v1/;
-#include "px30-ringneck.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "Theobroma Systems PX30-uQ7 SoM on Haikou devkit";
- compatible = "tsd,px30-ringneck-haikou", "rockchip,px30";
-
- aliases {
- mmc2 = &sdmmc;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&haikou_keys_pin>;
- pinctrl-names = "default";
-
- button-batlow-n {
- label = "BATLOW#";
- linux,code = <KEY_BATTERY>;
- gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
- };
-
- button-slp-btn-n {
- label = "SLP_BTN#";
- linux,code = <KEY_SLEEP>;
- gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
- };
-
- button-wake-n {
- label = "WAKE#";
- linux,code = <KEY_WAKEUP>;
- gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
- wakeup-source;
- };
-
- switch-lid-btn-n {
- label = "LID_BTN#";
- linux,code = <SW_LID>;
- linux,input-type = <EV_SW>;
- gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
- };
- };
-
- leds {
- pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
-
- sd_card_led: led-1 {
- gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "mmc2";
- function = LED_FUNCTION_SD;
- color = <LED_COLOR_ID_BLUE>;
- };
- };
-
- i2s0-sound {
- compatible = "simple-audio-card";
- simple-audio-card,format = "i2s";
- simple-audio-card,name = "Haikou,I2S-codec";
- simple-audio-card,mclk-fs = <512>;
-
- simple-audio-card,codec {
- clocks = <&sgtl5000_clk>;
- sound-dai = <&sgtl5000>;
- };
-
- simple-audio-card,cpu {
- bitclock-master;
- frame-master;
- sound-dai = <&i2s0_8ch>;
- };
- };
-
- sgtl5000_clk: sgtl5000-oscillator {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24576000>;
- };
-
- dc_12v: dc-12v-regulator {
- compatible = "regulator-fixed";
- regulator-name = "dc_12v";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- };
-
- vcc3v3_baseboard: vcc3v3-baseboard-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_baseboard";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_12v>;
- };
-
- vcc5v0_baseboard: vcc5v0-baseboard-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_baseboard";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_12v>;
- };
-
- vdda_codec: vdda-codec-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vdda_codec";
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc5v0_baseboard>;
- };
-
- vddd_codec: vddd-codec-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vddd_codec";
- regulator-boot-on;
- regulator-min-microvolt = <1600000>;
- regulator-max-microvolt = <1600000>;
- vin-supply = <&vcc5v0_baseboard>;
- };
-};
-
-&i2c2 {
- status = "okay";
- clock-frequency = <400000>;
-
- sgtl5000: codec@a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- clocks = <&sgtl5000_clk>;
- #sound-dai-cells = <0>;
- VDDA-supply = <&vdda_codec>;
- VDDIO-supply = <&vcc3v3_baseboard>;
- VDDD-supply = <&vddd_codec>;
- };
-};
-
-&i2c3 {
- eeprom@50 {
- reg = <0x50>;
- compatible = "atmel,24c01";
- pagesize = <8>;
- size = <128>;
- vcc-supply = <&vcc3v3_baseboard>;
- };
-};
-
-&i2s0_8ch {
- status = "okay";
-};
-
-&gmac {
- status = "okay";
-};
-
-&pinctrl {
- haikou {
- haikou_keys_pin: haikou-keys-pin {
- rockchip,pins =
- /* WAKE# */
- <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
- /* SLP_BTN# */
- <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
- /* LID_BTN */
- <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
- /* BATLOW# */
- <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
- /* BIOS_DISABLE# */
- <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- leds {
- sd_card_led_pin: sd-card-led-pin {
- rockchip,pins =
- <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&sdmmc {
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>;
- disable-wp;
- vmmc-supply = <&vcc3v3_baseboard>;
- status = "okay";
-};
-
-&spi1 {
- status = "okay";
-};
-
-&u2phy_otg {
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};
-
-&uart5 {
- pinctrl-0 = <&uart5_xfer>;
- status = "okay";
-};
-
-&usb20_otg {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
- */
-
-/dts-v1/;
-#include "px30.dtsi"
-#include <dt-bindings/leds/common.h>
-
-/ {
- aliases {
- mmc0 = &emmc;
- mmc1 = &sdio;
- rtc0 = &rtc_twi;
- rtc1 = &rk809;
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- pinctrl-0 = <&emmc_reset>;
- pinctrl-names = "default";
- reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&module_led_pin>;
- status = "okay";
-
- module_led: led-0 {
- gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
- function = LED_FUNCTION_HEARTBEAT;
- linux,default-trigger = "heartbeat";
- color = <LED_COLOR_ID_AMBER>;
- };
- };
-
- vcc5v0_sys: vccsys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-};
-
-&cpu0 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cpu1 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cpu2 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cpu3 {
- cpu-supply = <&vdd_arm>;
-};
-
-&emmc {
- bus-width = <8>;
- cap-mmc-highspeed;
- mmc-hs200-1_8v;
- supports-emmc;
- mmc-pwrseq = <&emmc_pwrseq>;
- non-removable;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vcc_emmc>;
-
- status = "okay";
-};
-
-/* On-module TI DP83825I PHY but no connector, enable in carrierboard */
-&gmac {
- snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 50000 50000>;
- phy-supply = <&vcc_3v3>;
- clock_in_out = "output";
-};
-
-&gpio2 {
- /*
- * The Qseven BIOS_DISABLE signal on the PX30-µQ7 keeps the on-module
- * eMMC powered-down initially (in fact it keeps the reset signal
- * asserted). BIOS_DISABLE_OVERRIDE pin allows to re-enable eMMC after
- * the SPL has been booted from SD Card.
- */
- bios-disable-override-hog {
- gpios = <RK_PB5 GPIO_ACTIVE_LOW>;
- output-high;
- line-name = "bios_disable_override";
- gpio-hog;
- };
-
- /*
- * The BIOS_DISABLE hog is a feedback pin for the actual status of the
- * signal, ignoring the BIOS_DISABLE_OVERRIDE logic. This usually
- * represents the state of a switch on the baseboard.
- */
- bios-disable-n-hog {
- gpios = <RK_PC2 GPIO_ACTIVE_LOW>;
- line-name = "bios_disable";
- input;
- gpio-hog;
- };
-};
-
-&gpu {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- rk809: pmic@20 {
- compatible = "rockchip,rk809";
- reg = <0x20>;
- interrupt-parent = <&gpio0>;
- interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-0 = <&pmic_int>;
- pinctrl-names = "default";
- #clock-cells = <0>;
- clock-output-names = "xin32k";
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc5v0_sys>;
- vcc2-supply = <&vcc5v0_sys>;
- vcc3-supply = <&vcc5v0_sys>;
- vcc4-supply = <&vcc5v0_sys>;
- vcc5-supply = <&vcc_3v3>;
- vcc6-supply = <&vcc_3v3>;
- vcc7-supply = <&vcc_3v3>;
- vcc9-supply = <&vcc5v0_sys>;
-
- regulators {
- vdd_log: DCDC_REG1 {
- regulator-name = "vdd_log";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <950000>;
- };
- };
-
- vdd_arm: DCDC_REG2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <950000>;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_3v0_1v8: vcc_emmc: DCDC_REG4 {
- regulator-name = "vcc_3v0_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc_3v3: DCDC_REG5 {
- regulator-name = "vcc_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_1v8: LDO_REG2 {
- regulator-name = "vcc_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_1v0: LDO_REG3 {
- regulator-name = "vcc_1v0";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vccio_sd: LDO_REG5 {
- regulator-name = "vccio_sd";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_lcd: LDO_REG7 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-name = "vcc_lcd";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_1v8_lcd: LDO_REG8 {
- regulator-name = "vcc_1v8_lcd";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcca_1v8: LDO_REG9 {
- regulator-name = "vcca_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
- };
- };
-};
-
-&i2c1 {
- status = "okay";
-
- /* SE05x is limited to Fast Mode */
- clock-frequency = <400000>;
-
- fan: fan@18 {
- compatible = "ti,amc6821";
- reg = <0x18>;
- #cooling-cells = <2>;
- };
-
- rtc_twi: rtc@6f {
- compatible = "isil,isl1208";
- reg = <0x6f>;
- };
-};
-
-&i2c3 {
- status = "okay";
-};
-
-&i2s0_8ch {
- rockchip,trcm-sync-tx-only;
-
- pinctrl-0 = <&i2s0_8ch_sclktx &i2s0_8ch_lrcktx
- &i2s0_8ch_sdo0 &i2s0_8ch_sdi0>;
-};
-
-&io_domains {
- vccio1-supply = <&vcc_3v3>;
- vccio2-supply = <&vccio_sd>;
- vccio3-supply = <&vcc_3v3>;
- vccio4-supply = <&vcc_3v3>;
- vccio5-supply = <&vcc_3v3>;
- vccio6-supply = <&vcc_emmc>;
- vccio-oscgpi-supply = <&vcc_3v3>;
-
- status = "okay";
-};
-
-&pinctrl {
- emmc {
- emmc_reset: emmc-reset {
- rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- leds {
- module_led_pin: module-led-pin {
- rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int: pmic-int {
- rockchip,pins =
- <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-};
-
-&saradc {
- vref-supply = <&vcc_1v8>;
- status = "okay";
-};
-
-&sdmmc {
- vqmmc-supply = <&vccio_sd>;
-};
-
-&tsadc {
- status = "okay";
-};
-
-&u2phy {
- status = "okay";
-};
-
-&u2phy_host {
- status = "okay";
-};
-
-/* Mule UCAN */
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&wdt {
- status = "okay";
-};
bootph-all;
};
+&rk817 {
+ regulators {
+ vcc_cam: LDO_REG9 {
+ regulator-name = "vcc_cam";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+ };
+};
+
&saradc {
bootph-all;
status = "okay";
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Hardkernel Co., Ltd
- * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include "rk3326.dtsi"
-
-/ {
- model = "ODROID-GO Advance";
- compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
-
- aliases {
- mmc0 = &sdmmc;
- };
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- adc-joystick {
- compatible = "adc-joystick";
- io-channels = <&saradc 1>,
- <&saradc 2>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- axis@0 {
- reg = <0>;
- abs-flat = <10>;
- abs-fuzz = <10>;
- abs-range = <172 772>;
- linux,code = <ABS_X>;
- };
-
- axis@1 {
- reg = <1>;
- abs-flat = <10>;
- abs-fuzz = <10>;
- abs-range = <278 815>;
- linux,code = <ABS_Y>;
- };
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- power-supply = <&vcc_bl>;
- pwms = <&pwm1 0 25000 0>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&btn_pins>;
-
- /*
- * *** ODROIDGO2-Advance Switch layout ***
- * |------------------------------------------------|
- * | sw15 sw16 |
- * |------------------------------------------------|
- * | sw1 |-------------------| sw8 |
- * | sw3 sw4 | | sw7 sw5 |
- * | sw2 | LCD Display | sw6 |
- * | | | |
- * | |-------------------| |
- * | sw9 sw10 sw11 sw12 sw13 sw14 |
- * |------------------------------------------------|
- */
-
- sw1 {
- gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
- label = "DPAD-UP";
- linux,code = <BTN_DPAD_UP>;
- };
- sw2 {
- gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
- label = "DPAD-DOWN";
- linux,code = <BTN_DPAD_DOWN>;
- };
- sw3 {
- gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
- label = "DPAD-LEFT";
- linux,code = <BTN_DPAD_LEFT>;
- };
- sw4 {
- gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
- label = "DPAD-RIGHT";
- linux,code = <BTN_DPAD_RIGHT>;
- };
- sw5 {
- gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
- label = "BTN-A";
- linux,code = <BTN_EAST>;
- };
- sw6 {
- gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
- label = "BTN-B";
- linux,code = <BTN_SOUTH>;
- };
- sw7 {
- gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
- label = "BTN-Y";
- linux,code = <BTN_WEST>;
- };
- sw8 {
- gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
- label = "BTN-X";
- linux,code = <BTN_NORTH>;
- };
- sw9 {
- gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
- label = "F1";
- linux,code = <BTN_TRIGGER_HAPPY1>;
- };
- sw10 {
- gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
- label = "F2";
- linux,code = <BTN_TRIGGER_HAPPY2>;
- };
- sw11 {
- gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
- label = "F3";
- linux,code = <BTN_TRIGGER_HAPPY3>;
- };
- sw12 {
- gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
- label = "F4";
- linux,code = <BTN_TRIGGER_HAPPY4>;
- };
- sw13 {
- gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
- label = "F5";
- linux,code = <BTN_TRIGGER_HAPPY5>;
- };
- sw14 {
- gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
- label = "F6";
- linux,code = <BTN_TRIGGER_HAPPY6>;
- };
- sw15 {
- gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
- label = "TOP-LEFT";
- linux,code = <BTN_TL>;
- };
- sw16 {
- gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
- label = "TOP-RIGHT";
- linux,code = <BTN_TR>;
- };
- };
-
- leds: gpio-leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&blue_led_pin>;
-
- blue_led: led-0 {
- label = "blue:heartbeat";
- gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- rk817-sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "Analog";
- simple-audio-card,format = "i2s";
- simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
- simple-audio-card,mclk-fs = <256>;
- simple-audio-card,widgets =
- "Microphone", "Mic Jack",
- "Headphone", "Headphones",
- "Speaker", "Speaker";
- simple-audio-card,routing =
- "MICL", "Mic Jack",
- "Headphones", "HPOL",
- "Headphones", "HPOR",
- "Speaker", "SPKO";
-
- simple-audio-card,codec {
- sound-dai = <&rk817>;
- };
-
- simple-audio-card,cpu {
- sound-dai = <&i2s1_2ch>;
- };
- };
-
- vccsys: vccsys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v8_sys";
- regulator-always-on;
- regulator-min-microvolt = <3800000>;
- regulator-max-microvolt = <3800000>;
- };
-
- vcc_host: vcc_host {
- compatible = "regulator-fixed";
- regulator-name = "vcc_host";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&usb_midu>;
- };
-};
-
-&cpu0 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cpu1 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cpu2 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cpu3 {
- cpu-supply = <&vdd_arm>;
-};
-
-&cru {
- assigned-clocks = <&cru PLL_NPLL>,
- <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
- <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
- <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
- <&cru PLL_CPLL>;
-
- assigned-clock-rates = <1188000000>,
- <200000000>, <200000000>,
- <150000000>, <150000000>,
- <100000000>, <200000000>,
- <17000000>;
-};
-
-&display_subsystem {
- status = "okay";
-};
-
-&dsi {
- status = "okay";
-
- ports {
- mipi_out: port@1 {
- reg = <1>;
-
- mipi_out_panel: endpoint {
- remote-endpoint = <&mipi_in_panel>;
- };
- };
- };
-
- panel@0 {
- compatible = "elida,kd35t133";
- reg = <0>;
- backlight = <&backlight>;
- iovcc-supply = <&vcc_lcd>;
- reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
- rotation = <270>;
- vdd-supply = <&vcc_lcd>;
-
- port {
- mipi_in_panel: endpoint {
- remote-endpoint = <&mipi_out_panel>;
- };
- };
- };
-};
-
-&dsi_dphy {
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&vdd_logic>;
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- i2c-scl-falling-time-ns = <16>;
- i2c-scl-rising-time-ns = <280>;
- status = "okay";
-
- rk817: pmic@20 {
- compatible = "rockchip,rk817";
- reg = <0x20>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
- clock-output-names = "rk808-clkout1", "xin32k";
- clock-names = "mclk";
- clocks = <&cru SCLK_I2S1_OUT>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
- wakeup-source;
- #clock-cells = <1>;
- #sound-dai-cells = <0>;
-
- vcc1-supply = <&vccsys>;
- vcc2-supply = <&vccsys>;
- vcc3-supply = <&vccsys>;
- vcc4-supply = <&vccsys>;
- vcc5-supply = <&vccsys>;
- vcc6-supply = <&vccsys>;
- vcc7-supply = <&vccsys>;
- vcc8-supply = <&vccsys>;
-
- regulators {
- vdd_logic: DCDC_REG1 {
- regulator-name = "vdd_logic";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1150000>;
- regulator-ramp-delay = <6001>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <950000>;
- };
- };
-
- vdd_arm: DCDC_REG2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <950000>;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_3v3: DCDC_REG4 {
- regulator-name = "vcc_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_1v8: LDO_REG2 {
- regulator-name = "vcc_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vdd_1v0: LDO_REG3 {
- regulator-name = "vdd_1v0";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc3v3_pmu: LDO_REG4 {
- regulator-name = "vcc3v3_pmu";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vccio_sd: LDO_REG5 {
- regulator-name = "vccio_sd";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_sd: LDO_REG6 {
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_bl: LDO_REG7 {
- regulator-name = "vcc_bl";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_lcd: LDO_REG8 {
- regulator-name = "vcc_lcd";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <2800000>;
- };
- };
-
- vcc_cam: LDO_REG9 {
- regulator-name = "vcc_cam";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- usb_midu: BOOST {
- regulator-name = "usb_midu";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5400000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
-
- rk817_codec: codec {
- rockchip,mic-in-differential;
- };
- };
-};
-
-/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
-&i2c1 {
- clock-frequency = <400000>;
- status = "okay";
-};
-
-/* I2S 1 Channel Used */
-&i2s1_2ch {
- status = "okay";
-};
-
-&io_domains {
- vccio1-supply = <&vcc_3v3>;
- vccio2-supply = <&vccio_sd>;
- vccio3-supply = <&vcc_3v3>;
- vccio4-supply = <&vcc_3v3>;
- vccio5-supply = <&vcc_3v3>;
- vccio6-supply = <&vcc_3v3>;
- status = "okay";
-};
-
-&pmu_io_domains {
- pmuio1-supply = <&vcc3v3_pmu>;
- pmuio2-supply = <&vcc3v3_pmu>;
- status = "okay";
-};
-
-&pwm1 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcc_1v8>;
- status = "okay";
-};
-
-&sdmmc {
- cap-sd-highspeed;
- card-detect-delay = <200>;
- cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- vmmc-supply = <&vcc_sd>;
- vqmmc-supply = <&vccio_sd>;
- status = "okay";
-};
-
-&sfc {
- pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
- pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <108000000>;
- spi-rx-bus-width = <2>;
- spi-tx-bus-width = <1>;
- };
-};
-
-&tsadc {
- status = "okay";
-};
-
-&u2phy {
- status = "okay";
-
- u2phy_host: host-port {
- status = "okay";
- };
-
- u2phy_otg: otg-port {
- status = "disabled";
- };
-};
-
-&usb20_otg {
- status = "okay";
-};
-
-/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_xfer &uart1_cts>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2m1_xfer>;
- status = "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&pinctrl {
- btns {
- btn_pins: btn-pins {
- rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
- <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
- <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
- <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
- <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
- <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
- <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
- <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
- <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
- <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
- <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
- <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
- <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
- <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
- <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
- <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- headphone {
- hp_det: hp-det {
- rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- leds {
- blue_led_pin: blue-led-pin {
- rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- dc_det: dc-det {
- rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- pmic_int: pmic-int {
- rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- soc_slppin_gpio: soc_slppin_gpio {
- rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
- };
-
- soc_slppin_rst: soc_slppin_rst {
- rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
- };
-
- soc_slppin_slp: soc_slppin_slp {
- rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
- };
- };
-};
config ROCKCHIP_PX30
bool "Support Rockchip PX30"
select ARM64
+ imply OF_UPSTREAM
select SUPPORT_SPL
select SUPPORT_TPL
select SPL
CONFIG_COUNTER_FREQUENCY=24000000
CONFIG_ARCH_ROCKCHIP=y
CONFIG_NR_DRAM_BANKS=1
-CONFIG_DEFAULT_DEVICE_TREE="px30-evb"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/px30-evb"
CONFIG_DM_RESET=y
CONFIG_ROCKCHIP_PX30=y
# CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set
CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
+# CONFIG_OF_UPSTREAM is not set
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_OFFSET=0x4000
-CONFIG_DEFAULT_DEVICE_TREE="rk3326-odroid-go2"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3326-odroid-go2"
CONFIG_DM_RESET=y
CONFIG_ROCKCHIP_PX30=y
# CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set
CONFIG_COUNTER_FREQUENCY=24000000
CONFIG_ARCH_ROCKCHIP=y
CONFIG_NR_DRAM_BANKS=1
-CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-ctouch2-of10"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/px30-engicam-px30-core-ctouch2-of10"
CONFIG_DM_RESET=y
CONFIG_ROCKCHIP_PX30=y
# CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set
CONFIG_COUNTER_FREQUENCY=24000000
CONFIG_ARCH_ROCKCHIP=y
CONFIG_NR_DRAM_BANKS=1
-CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-ctouch2"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/px30-engicam-px30-core-ctouch2"
CONFIG_DM_RESET=y
CONFIG_ROCKCHIP_PX30=y
# CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set
CONFIG_COUNTER_FREQUENCY=24000000
CONFIG_ARCH_ROCKCHIP=y
CONFIG_NR_DRAM_BANKS=1
-CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-edimm2.2"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/px30-engicam-px30-core-edimm2.2"
CONFIG_DM_RESET=y
CONFIG_ROCKCHIP_PX30=y
# CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SPL_GPIO=y
CONFIG_NR_DRAM_BANKS=2
-CONFIG_DEFAULT_DEVICE_TREE="px30-ringneck-haikou"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/px30-ringneck-haikou"
CONFIG_DM_RESET=y
CONFIG_ROCKCHIP_PX30=y
# CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set
projects / u-boot.git / commitdiff