arm: socfpga: improve raw MMC SPL boot

Before this patch, when booting from MMC (no filesystem), the SPL
loaded U-Boot from a fixed offset.
It will now load U-Boot from an offset of 256kB (which is 4 times the
padded SPL image) in the third partition.

This behaviour is similar to what the vendor SPL (based on
U-Boot 2013.01) does, and allows to directly 'dd' the
u-boot-with-spl.sfp file to the A2 partition.

Signed-off-by: Sylvain Lesne <lesne@alse-fr.com>

diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index aee4012c3061797c7f345f9f3012aa6459d9ff11..1f8b7b3b80e92d57a6ef3ec4ba5b7228b158e4e5 100644 (file)
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -346,9 +346,9 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot-dtb.img"
 #define CONFIG_SPL_LIBDISK_SUPPORT
 #else
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     3
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0xa00 /* offset 2560 sect (1M+256k) */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     800 /* 400 KB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION     3
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x200 /* offset 512 sect (256k) */
+#define CONFIG_SPL_LIBDISK_SUPPORT
 #endif
 #endif