ARM: imx: romapi: Repair FlexSPI NOR boot offset

The FlexSPI NOR boot offset does not require any special handling,
the image_offset is correct in either case (0x1000 for FlexSPI NOR
and 0x8000 for SD/eMMC) and the offset of u-boot.itb from the start
of flash.bin is always 0x58000 on MX8MN/MX8MP, which matches the
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512 - 0x8000 in case
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300, which is always the
case on MX8MN/MX8MP.

The CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR is really overloaded in
case of the MX8MN/MX8MP, but fixing that needs additional plumbing.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

diff --git a/arch/arm/mach-imx/spl_imx_romapi.c b/arch/arm/mach-imx/spl_imx_romapi.c
index d827de375a66272d7358caf6804e197b69e6c280..c47f5a6bdb448cc4fc7ba07faeba4f9b58080779 100644 (file)
--- a/arch/arm/mach-imx/spl_imx_romapi.c
+++ b/arch/arm/mach-imx/spl_imx_romapi.c
@@ -38,14 +38,8 @@ ulong spl_romapi_raw_seekable_read(u32 offset, u32 size, void *buf)
 
 ulong __weak spl_romapi_get_uboot_base(u32 image_offset, u32 rom_bt_dev)
 {
-       u32 offset;
-
-       if (((rom_bt_dev >> 16) & 0xff) ==  BT_DEV_TYPE_FLEXSPINOR)
-               offset = CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512;
-       else
-               offset = image_offset + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512 - 0x8000;
-
-       return offset;
+       return image_offset +
+               (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512 - 0x8000);
 }
 
 static int is_boot_from_stream_device(u32 boot)