spl: Kconfig: Use tabs instead of space for alignment

A lot of entries were using spaces instead of tab for alignment that's why
it is good to fix it to use the same style everywhere.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index df5468f1ac291932f004ef0987404e7d5008b712..b709a05a7b79743bafac76c5a6b01d2871056dec 100644 (file)
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -165,7 +165,7 @@ config SPL_BOARD_INIT
          provided by the board.
 
 config SPL_BOOTROM_SUPPORT
-        bool "Support returning to the BOOTROM"
+       bool "Support returning to the BOOTROM"
        help
          Some platforms (e.g. the Rockchip RK3368) provide support in their
          ROM for loading the next boot-stage after performing basic setup
@@ -707,7 +707,7 @@ config SYS_MMCSD_FS_BOOT_PARTITION
        default 1
        help
          Partition on the MMC to load U-Boot from when the MMC is being
-          used in fs mode
+         used in fs mode
 
 config SPL_MMC_TINY
        bool "Tiny MMC framework in SPL"
@@ -784,8 +784,8 @@ config SPL_NAND_SIMPLE
 config SPL_NAND_BASE
        depends on SPL_NAND_DRIVERS
        bool "Use Base NAND Driver"
-        help
-          Include nand_base.c in the SPL.
+       help
+         Include nand_base.c in the SPL.
 
 config SPL_NAND_IDENT
        depends on SPL_NAND_BASE
@@ -1301,7 +1301,7 @@ config SPL_ATF_LOAD_IMAGE_V2
          method, say Y.
 
 config SPL_ATF_NO_PLATFORM_PARAM
-        bool "Pass no platform parameter"
+       bool "Pass no platform parameter"
        depends on SPL_ATF
        help
          While we expect to call a pointer to a valid FDT (or NULL)
@@ -1395,7 +1395,7 @@ config TPL_BOOTCOUNT_LIMIT
          For example, it may be useful to choose the device to boot.
 
 config TPL_LDSCRIPT
-        string "Linker script for the TPL stage"
+       string "Linker script for the TPL stage"
        depends on TPL
        default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64
        default "arch/\$(ARCH)/cpu/u-boot-spl.lds"
@@ -1409,7 +1409,7 @@ config TPL_LDSCRIPT
          fall back to the linker-script used for the SPL stage.
 
 config TPL_NEEDS_SEPARATE_TEXT_BASE
-        bool "TPL needs a separate text-base"
+       bool "TPL needs a separate text-base"
        default n
        depends on TPL
        help
@@ -1418,7 +1418,7 @@ config TPL_NEEDS_SEPARATE_TEXT_BASE
          .text sections of the TPL stage has to be set below.
 
 config TPL_NEEDS_SEPARATE_STACK
-        bool "TPL needs a separate initial stack-pointer"
+       bool "TPL needs a separate initial stack-pointer"
        default n
        depends on TPL
        help
@@ -1426,20 +1426,20 @@ config TPL_NEEDS_SEPARATE_STACK
          stack-pointer from the settings for the SPL stage.
 
 config TPL_TEXT_BASE
-        hex "Base address for the .text section of the TPL stage"
+       hex "Base address for the .text section of the TPL stage"
        depends on TPL_NEEDS_SEPARATE_TEXT_BASE
        help
          The base address for the .text section of the TPL stage.
 
 config TPL_MAX_SIZE
-        int "Maximum size (in bytes) for the TPL stage"
+       int "Maximum size (in bytes) for the TPL stage"
        default 0
        depends on TPL
        help
          The maximum size (in bytes) of the TPL stage.
 
 config TPL_STACK
-        hex "Address of the initial stack-pointer for the TPL stage"
+       hex "Address of the initial stack-pointer for the TPL stage"
        depends on TPL_NEEDS_SEPARATE_STACK
        help
          The address of the initial stack-pointer for the TPL stage.
@@ -1457,7 +1457,7 @@ config TPL_READ_ONLY
          device-private data.
 
 config TPL_BOOTROM_SUPPORT
-        bool "Support returning to the BOOTROM (from TPL)"
+       bool "Support returning to the BOOTROM (from TPL)"
        help
          Some platforms (e.g. the Rockchip RK3368) provide support in their
          ROM for loading the next boot-stage after performing basic setup