ARM: embestmx6boards: convert the mars/riot boards to DM_MMC

Convert the two Embest boards to use DM MMC.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: "Eric Bénard" <eric@eukrea.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>

diff --git a/arch/arm/dts/imx6dl-riotboard-u-boot.dtsi b/arch/arm/dts/imx6dl-riotboard-u-boot.dtsi
new file mode 100644 (file)
index 0000000..e51cd24
--- /dev/null
+++ b/arch/arm/dts/imx6dl-riotboard-u-boot.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/ {
+       aliases {
+               mmc0 = &usdhc2;
+               mmc1 = &usdhc3;
+       };
+};

diff --git a/arch/arm/dts/imx6q-marsboard-u-boot.dtsi b/arch/arm/dts/imx6q-marsboard-u-boot.dtsi
new file mode 100644 (file)
index 0000000..e51cd24
--- /dev/null
+++ b/arch/arm/dts/imx6q-marsboard-u-boot.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/ {
+       aliases {
+               mmc0 = &usdhc2;
+               mmc1 = &usdhc3;
+       };
+};

diff --git a/board/embest/mx6boards/mx6boards.c b/board/embest/mx6boards/mx6boards.c
index 65b3942e39917218f9b9bbdf47c9109c95fefe05..c3bbcff0cf58df53f4cf481e0bdb5fbd95900260 100644 (file)
--- a/board/embest/mx6boards/mx6boards.c
+++ b/board/embest/mx6boards/mx6boards.c
@@ -31,8 +31,6 @@
 #include <asm/mach-imx/video.h>
 #include <i2c.h>
 #include <input.h>
-#include <mmc.h>
-#include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <asm/arch/mxc_hdmi.h>
@@ -150,141 +148,6 @@ int board_phy_config(struct phy_device *phydev)
        return 0;
 }
 
-iomux_v3_cfg_t const usdhc2_pads[] = {
-       MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CLK_CTRL),
-       MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), /* WP */
-       MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
-};
-
-iomux_v3_cfg_t const usdhc3_pads[] = {
-       MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CLK_CTRL),
-       MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-};
-
-iomux_v3_cfg_t const riotboard_usdhc3_pads[] = {
-       MX6_PAD_SD3_DAT4__GPIO7_IO01 | MUX_PAD_CTRL(NO_PAD_CTRL), /* WP */
-       MX6_PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
-};
-
-iomux_v3_cfg_t const usdhc4_pads[] = {
-       MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CLK_CTRL),
-       MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-       /* eMMC RST */
-       MX6_PAD_NANDF_ALE__GPIO6_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-#ifdef CONFIG_FSL_ESDHC_IMX
-struct fsl_esdhc_cfg usdhc_cfg[3] = {
-       {USDHC2_BASE_ADDR},
-       {USDHC3_BASE_ADDR},
-       {USDHC4_BASE_ADDR},
-};
-
-#define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4)
-#define USDHC3_CD_GPIO IMX_GPIO_NR(7, 0)
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-       struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
-       int ret = 0;
-
-       switch (cfg->esdhc_base) {
-       case USDHC2_BASE_ADDR:
-               ret = !gpio_get_value(USDHC2_CD_GPIO);
-               break;
-       case USDHC3_BASE_ADDR:
-               if (board_type == BOARD_IS_RIOTBOARD)
-                       ret = !gpio_get_value(USDHC3_CD_GPIO);
-               else if (board_type == BOARD_IS_MARSBOARD)
-                       ret = 1; /* eMMC/uSDHC3 is always present */
-               break;
-       case USDHC4_BASE_ADDR:
-               ret = 1; /* eMMC/uSDHC4 is always present */
-               break;
-       }
-
-       return ret;
-}
-
-int board_mmc_init(struct bd_info *bis)
-{
-       int ret;
-       int i;
-
-       /*
-        * According to the board_mmc_init() the following map is done:
-        * (U-Boot device node)    (Physical Port)
-        * ** RiOTboard :
-        * mmc0                    SDCard slot (bottom)
-        * mmc1                    uSDCard slot (top)
-        * mmc2                    eMMC
-        * ** MarSBoard :
-        * mmc0                    uSDCard slot (bottom)
-        * mmc1                    eMMC
-        */
-       for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
-               switch (i) {
-               case 0:
-                       imx_iomux_v3_setup_multiple_pads(
-                               usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
-                       gpio_direction_input(USDHC2_CD_GPIO);
-                       usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
-                       usdhc_cfg[0].max_bus_width = 4;
-                       break;
-               case 1:
-                       imx_iomux_v3_setup_multiple_pads(
-                               usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
-                       if (board_type == BOARD_IS_RIOTBOARD) {
-                               imx_iomux_v3_setup_multiple_pads(
-                                       riotboard_usdhc3_pads,
-                                       ARRAY_SIZE(riotboard_usdhc3_pads));
-                               gpio_direction_input(USDHC3_CD_GPIO);
-                       } else {
-                               gpio_direction_output(IMX_GPIO_NR(7, 8) , 0);
-                               udelay(250);
-                               gpio_set_value(IMX_GPIO_NR(7, 8), 1);
-                       }
-                       usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
-                       usdhc_cfg[1].max_bus_width = 4;
-                       break;
-               case 2:
-                       imx_iomux_v3_setup_multiple_pads(
-                               usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
-                       usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
-                       usdhc_cfg[2].max_bus_width = 4;
-                       gpio_direction_output(IMX_GPIO_NR(6, 8) , 0);
-                       udelay(250);
-                       gpio_set_value(IMX_GPIO_NR(6, 8), 1);
-                       break;
-               default:
-                       printf("Warning: you configured more USDHC controllers"
-                              "(%d) then supported by the board (%d)\n",
-                              i + 1, CONFIG_SYS_FSL_USDHC_NUM);
-                       return -EINVAL;
-               }
-
-               ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
-               if (ret)
-                       return ret;
-       }
-
-       return 0;
-}
-#endif
-
 #ifdef CONFIG_MXC_SPI
 iomux_v3_cfg_t const ecspi1_pads[] = {
        MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),

diff --git a/configs/marsboard_defconfig b/configs/marsboard_defconfig
index 4d15f0432eee2081dc363f5be8575a9ed93d36d3..63fc60a8844e242e1754c38a76ed591563dba8d9 100644 (file)
--- a/configs/marsboard_defconfig
+++ b/configs/marsboard_defconfig
@@ -30,6 +30,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
 CONFIG_DM_GPIO=y
 CONFIG_BOUNCE_BUFFER=y
+CONFIG_DM_MMC=y
 CONFIG_FSL_USDHC=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y

diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig
index 0284f86405ab5cd4600521a33f0bbb215aba73c7..4f86a08e78fdfb5bb056e9d5b7c31040e4c0e7b6 100644 (file)
--- a/configs/riotboard_defconfig
+++ b/configs/riotboard_defconfig
@@ -42,6 +42,7 @@ CONFIG_DM=y
 CONFIG_DM_GPIO=y
 CONFIG_BOUNCE_BUFFER=y
 CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_DM_MMC=y
 CONFIG_FSL_USDHC=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y