rk3288-vyasa.dtb
dtb-$(CONFIG_ROCKCHIP_RK3368) += \
- rk3368-lion-haikou.dtb \
rk3368-sheep.dtb \
rk3368-geekbox.dtb \
rk3368-px5-evb.dtb \
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+ OR X11
-/*
- * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
- */
-
-#include "rk3368-u-boot.dtsi"
-
-/ {
- config {
- u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
- u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- u-boot,spl-boot-order = &emmc, &sdmmc;
- };
-
- smbios {
- compatible = "u-boot,sysinfo-smbios";
-
- smbios {
- system {
- manufacturer = "rockchip";
- product = "sheep_rk3368";
- };
-
- baseboard {
- manufacturer = "rockchip";
- product = "sheep_rk3368";
- };
-
- chassis {
- manufacturer = "rockchip";
- product = "sheep_rk3368";
- };
- };
- };
-};
-
-&gpio2 {
- bootph-all;
-};
-
-&pinctrl {
- bootph-all;
-};
-
-&service_msch {
- bootph-all;
-};
-
-&dmc {
- bootph-all;
-
- /*
- * Validation of throughput using SPEC2000 shows the following
- * relative performance for the different memory schedules:
- * - CBDR: 30.1
- * - CBRD: 29.8
- * - CRBD: 29.9
- * Note that the best performance for any given application workload
- * may vary from the default configured here (e.g. 164.gzip is fastest
- * with CBRD, whereas 252.eon and 186.crafty are fastest with CRBD).
- *
- * See doc/device-tree-bindings/clock/rockchip,rk3368-dmc.txt for
- * details on the 'rockchip,memory-schedule' property and how it
- * affects the physical-address to device-address mapping.
- */
- rockchip,memory-schedule = <DMC_MSCH_CBDR>;
- rockchip,ddr-frequency = <800000000>;
- rockchip,ddr-speed-bin = <DDR3_1600K>;
-
- status = "okay";
-};
-
-&pmugrf {
- bootph-all;
-};
-
-&sgrf {
- bootph-all;
-};
-
-&cru {
- bootph-all;
-};
-
-&grf {
- bootph-all;
-};
-
-&uart0 {
- bootph-all;
-};
-
-&emmc {
- bootph-pre-ram;
-};
-
-&sdmmc {
- bootph-pre-ram;
-};
-
-&spi1 {
- bootph-pre-ram;
-
- spiflash: w25q32dw@0 {
- bootph-pre-ram;
- };
-};
-
-&timer0 {
- bootph-all;
- clock-frequency = <24000000>;
- status = "okay";
-};
-
-
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH
- */
-
-/dts-v1/;
-#include "rk3368-lion.dtsi"
-
-/ {
- model = "Theobroma Systems RK3368-uQ7 Baseboard";
- compatible = "tsd,rk3368-lion-haikou", "rockchip,rk3368";
-
- aliases {
- mmc1 = &sdmmc;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- i2cmux2 {
- i2c@0 {
- eeprom: eeprom@50 {
- compatible = "atmel,24c01";
- pagesize = <8>;
- reg = <0x50>;
- };
- };
- };
-
- leds {
- pinctrl-0 = <&module_led_pins>, <&sd_card_led_pin>;
-
- sd_card_led: led-3 {
- label = "sd_card_led";
- gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "mmc0";
- };
- };
-
- dc_12v: dc-12v {
- compatible = "regulator-fixed";
- regulator-name = "dc_12v";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- };
-
- vcc3v3_baseboard: vcc3v3-baseboard {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_baseboard";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_12v>;
- };
-
- vcc5v0_otg: vcc5v0-otg-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&otg_vbus_drv>;
- regulator-name = "vcc5v0_otg";
- regulator-always-on;
- };
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- cd-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
- disable-wp;
- max-frequency = <25000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
- rockchip,default-sample-phase = <90>;
- vmmc-supply = <&vcc3v3_baseboard>;
- status = "okay";
-};
-
-&spi2 {
- cs-gpios = <0>, <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
- status = "okay";
-};
-
-&uart1 {
- /* alternate function of GPIO5/6 */
- status = "disabled";
-};
-
-&pinctrl {
- pinctrl-names = "default";
- pinctrl-0 = <&haikou_pin_hog>;
-
- hog {
- haikou_pin_hog: haikou-pin-hog {
- rockchip,pins =
- /* LID_BTN */
- <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
- /* BATLOW# */
- <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
- /* SLP_BTN# */
- <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
- /* BIOS_DISABLE# */
- <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- leds {
- sd_card_led_pin: sd-card-led-pin {
- rockchip,pins =
- <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- sdmmc {
- sdmmc_cd_pin: sdmmc-cd-pin {
- rockchip,pins =
- <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb_otg {
- otg_vbus_drv: otg-vbus-drv {
- rockchip,pins =
- <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH
- */
-
-/dts-v1/;
-#include "rk3368.dtsi"
-
-/ {
- aliases {
- mmc0 = &emmc;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- ext_gmac: gmac-clk {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "ext_gmac";
- #clock-cells = <0>;
- };
-
- i2cmux1 {
- compatible = "i2c-mux-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- i2c-parent = <&i2c1>;
- mux-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
-
- /* Q7_GPO_I2C */
- i2c@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- /* Q7_SMB */
- i2c@1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- i2cmux2 {
- compatible = "i2c-mux-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- i2c-parent = <&i2c2>;
- mux-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
-
- /* Q7_LVDS_BLC_I2C */
- i2c@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- fan: fan@18 {
- compatible = "ti,amc6821";
- reg = <0x18>;
- #cooling-cells = <2>;
- };
-
- rtc_twi: rtc@6f {
- compatible = "isil,isl1208";
- reg = <0x6f>;
- };
- };
-
- /* Q7_GP2_I2C */
- i2c@1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&module_led_pins>;
-
- module_led1: led-1 {
- label = "module_led1";
- gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- panic-indicator;
- };
-
- module_led2: led-2 {
- label = "module_led2";
- gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
-
- vcc_sys: vcc-sys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu>;
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu>;
-};
-
-&cpu_b2 {
- cpu-supply = <&vdd_cpu>;
-};
-
-&cpu_b3 {
- cpu-supply = <&vdd_cpu>;
-};
-
-&emmc {
- bus-width = <8>;
- clock-frequency = <150000000>;
- mmc-hs200-1_8v;
- non-removable;
- vmmc-supply = <&vcc33_io>;
- vqmmc-supply = <&vcc18_io>;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
- status = "okay";
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_MAC>;
- assigned-clock-parents = <&ext_gmac>;
- clock_in_out = "input";
- phy-supply = <&vcc33_io>;
- phy-mode = "rgmii";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
- tx_delay = <0x10>;
- rx_delay = <0x10>;
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
- clock-output-names = "xin32k", "rk808-clkout2";
- #clock-cells = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>, <&pmic_sleep>;
- rockchip,system-power-controller;
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc6-supply = <&vcc_sys>;
- vcc7-supply = <&vcc_sys>;
- vcc8-supply = <&vcc_sys>;
- vcc9-supply = <&vcc_sys>;
- vcc10-supply = <&vcc_sys>;
- vcc11-supply = <&vcc_sys>;
- vcc12-supply = <&vcc_sys>;
-
- regulators {
- vdd_cpu: DCDC_REG1 {
- regulator-name = "vdd_cpu";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd_log: DCDC_REG2 {
- regulator-name = "vdd_log";
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc33_io: DCDC_REG4 {
- regulator-name = "vcc33_io";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc33_video: LDO_REG2 {
- regulator-name = "vcc33_video";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vdd10_pll: LDO_REG3 {
- regulator-name = "vdd10_pll";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc18_io: LDO_REG4 {
- regulator-name = "vcc18_io";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- };
-
- vdd10_video: LDO_REG6 {
- regulator-name = "vdd10_video";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc18_video: LDO_REG8 {
- regulator-name = "vcc18_video";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
- };
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&pinctrl {
- leds {
- module_led_pins: module-led-pins {
- rockchip,pins =
- <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
- <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- pmic_sleep: pmic-sleep {
- rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
- };
- };
-};
-
-&spi1 {
- status = "okay";
-
- norflash: flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <50000000>;
- };
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart3 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&wdt {
- status = "okay";
-};
choice
prompt "RK3368 board"
-config TARGET_LION_RK3368
- bool "Theobroma Systems RK3368-uQ7 (Lion) module"
- select ARCH_EARLY_INIT_R
- help
- The RK3368-uQ7 is a micro-Qseven form-factor (40mm x 70mm,
- MXM-230 connector) system-on-module designed by Theobroma
- Systems for industrial applications.
-
- It provides the following features:
- - 8x Cortex-A53 (in 2 clusters of 4 cores each)
- - (on-module) up to 4GB of DDR3 memory
- - (on-module) SPI-NOR flash
- - (on-module) eMMC
- - Gigabit Ethernet (with an on-module KSZ9031 PHY)
- - USB
- - HDMI
- - MIPI-DSI/single-channel LVDS (muxed on the 'LVDS-A' pin-group)
- - various 'slow' interfaces (e.g. UART, SPI, I2C, I2S, ...)
- - on-module STM32 providing CAN, RTC and fan-control
- - (optional on-module) EAL4+-certified security module
-
config TARGET_SHEEP
bool "Sheep board"
help
config SPL_LIBGENERIC_SUPPORT
default y
-source "board/theobroma-systems/lion_rk3368/Kconfig"
source "board/rockchip/sheep_rk3368/Kconfig"
source "board/geekbuying/geekbox/Kconfig"
source "board/rockchip/evb_px5/Kconfig"
+++ /dev/null
-if TARGET_LION_RK3368
-
-config SYS_BOARD
- default "lion_rk3368"
-
-config SYS_VENDOR
- default "theobroma-systems"
-
-config SYS_CONFIG_NAME
- default "lion_rk3368"
-
-config ENV_SIZE
- default 0x2000
-
-config ENV_OFFSET
- default 0x3c000 if ENV_IS_IN_SPI_FLASH
-
-endif
+++ /dev/null
-LION-RK3368 (RK3368-uQ7 system-on-module)
-M: Quentin Schulz <quentin.schulz@cherry.de>
-M: Klaus Goger <klaus.goger@cherry.de>
-S: Maintained
-F: board/theobroma-systems/lion_rk3368
-F: include/configs/lion_rk3368.h
-F: arch/arm/dts/rk3368-lion.dts
-F: configs/lion-rk3368_defconfig
-W: https://www.theobroma-systems.com/rk3368-uq7/tech-specs
-T: git git://git.theobroma-systems.com/lion-u-boot.git
+++ /dev/null
-Here is the step-by-step to boot to U-Boot on RK3368-uQ7
-
-Get the Source and build ATF
-============================
-
- > git clone git://git.theobroma-systems.com/arm-trusted-firmware.git
- > cd arm-trusted-firmware
- > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3368 bl31
- > cp build/rk3368/release/bl31.bin ../u-boot/bl31-rk3368.bin
-
-Configure U-Boot
-================
-
- > cd ../u-boot
- > make lion-rk3368_defconfig
-
-Build the TPL/SPL stage
-=======================
-
- > make CROSS_COMPILE=aarch64-unknown-elf-
-
-Build the full U-Boot and a FIT image including the ATF
-=======================================================
-
- > make CROSS_COMPILE=aarch64-unknown-elf- u-boot.itb
-
-Flash the image
-===============
-
-Copy the SPL to offset 32k and the FIT image containing the payloads
-(U-Boot proper, ATF, devicetree) to offset 256k card.
-
-SD-Card
--------
-
- > dd if=idbloader.img of=/dev/sdb seek=64
- > dd if=u-boot.itb of=/dev/sdb seek=512
-
-eMMC
-----
-
-rkdeveloptool allows to flash the on-board eMMC via the USB OTG interface with
-help of the Rockchip loader binary.
-
- > git clone https://github.com/rockchip-linux/rkdeveloptool
- > cd rkdeveloptool
- > autoreconf -i && && ./configure && make
- > git clone https://github.com/rockchip-linux/rkbin.git
- > ./rkdeveloptool db rkbin/rk33/rk3368_loader_v2.00.256.bin
- > ./rkdeveloptool wl 64 ../spl.img
- > ./rkdeveloptool wl 512 ../u-boot.itb
-
-
-If everything went according to plan, you should see the following
-output on UART0:
-
-<debug_uart> U-Boot TPL board init
-Trying to boot from BOOTROM
-Returning to boot ROM...
-Trying to boot from MMC1
-NOTICE: BL31: v1.3(release):v1.2-1320-gbf43a443
-NOTICE: BL31: Built : 18:04:47, Jul 5 2017
-
-
-U-Boot 2017.07-00158-g2395e99858 (Jul 18 2017 - 21:03:31 +0200)
-
-Model: Theobroma Systems RK3368-uQ7 SoM
-DRAM: 2 GiB
-MMC: dwmmc@ff0c0000: 1, dwmmc@ff0f0000: 0
-Using default environment
-
-In: serial@ff180000
-Out: serial@ff180000
-Err: serial@ff180000
-Net:
-Warning: ethernet@ff290000 (eth0) using random MAC address - d2:69:35:7e:d0:1e
-eth0: ethernet@ff290000
-Hit any key to stop autoboot: 2
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_SKIP_LOWLEVEL_INIT=y
-CONFIG_COUNTER_FREQUENCY=24000000
-CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00200000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
-CONFIG_ENV_OFFSET=0x3F8000
-CONFIG_DEFAULT_DEVICE_TREE="rk3368-lion-haikou"
-CONFIG_SPL_TEXT_BASE=0x00000000
-CONFIG_ROCKCHIP_RK3368=y
-CONFIG_TPL_LIBCOMMON_SUPPORT=y
-CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_SPL_STACK=0x188000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x400000
-CONFIG_SPL_BSS_MAX_SIZE=0x20000
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
-CONFIG_SPL=y
-CONFIG_DEBUG_UART_BASE=0xFF180000
-CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x800800
-CONFIG_DEBUG_UART=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-CONFIG_BOOTSTAGE=y
-CONFIG_SPL_BOOTSTAGE=y
-CONFIG_BOOTSTAGE_REPORT=y
-CONFIG_BOOTSTAGE_FDT=y
-CONFIG_DEFAULT_FDT_FILE="rockchip/rk3368-lion-haikou.dtb"
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_MAX_SIZE=0x40000
-CONFIG_SPL_PAD_TO=0x7f8000
-CONFIG_SPL_BOOTROM_SUPPORT=y
-# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
-CONFIG_SPL_ATF=y
-CONFIG_TPL=y
-CONFIG_TPL_SYS_MALLOC_SIMPLE=y
-CONFIG_TPL_DRIVERS_MISC=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_BOOTSTAGE=y
-CONFIG_CMD_REGULATOR=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_TPL_OF_CONTROL=y
-CONFIG_OF_LIVE=y
-CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent"
-CONFIG_TPL_OF_PLATDATA=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_TPL_DM=y
-CONFIG_REGMAP=y
-CONFIG_SPL_REGMAP=y
-CONFIG_TPL_REGMAP=y
-CONFIG_SYSCON=y
-CONFIG_SPL_SYSCON=y
-CONFIG_TPL_SYSCON=y
-CONFIG_CLK=y
-CONFIG_SPL_CLK=y
-CONFIG_TPL_CLK=y
-CONFIG_ROCKCHIP_GPIO=y
-CONFIG_SYS_I2C_ROCKCHIP=y
-CONFIG_MMC_DW=y
-CONFIG_MMC_DW_ROCKCHIP=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_PHY_ANEG_TIMEOUT=8000
-CONFIG_PHY_MSCC=y
-CONFIG_DM_ETH_PHY=y
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_RGMII=y
-CONFIG_GMAC_ROCKCHIP=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_DM_PMIC=y
-CONFIG_PMIC_RK8XX=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_REGULATOR_RK8XX=y
-CONFIG_RAM=y
-CONFIG_SPL_RAM=y
-CONFIG_TPL_RAM=y
-CONFIG_DEBUG_UART_SHIFT=2
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_SYS_NS16550_MEM32=y
-CONFIG_ROCKCHIP_SPI=y
-CONFIG_SYSINFO=y
-CONFIG_SYSINFO_SMBIOS=y
-CONFIG_SYSRESET=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_GENERIC=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DWC2_OTG=y
-CONFIG_SPL_TINY_MEMSET=y
-CONFIG_LZO=y
-CONFIG_ERRNO_STR=y
- GeekBox (geekbox)
- PX5 EVB (evb-px5)
- Rockchip Sheep (sheep-rk3368)
- - Theobroma Systems RK3368-uQ7 SoM - Lion (lion-rk3368)
* rk3399
- 96boards RK3399 Ficus (ficus-rk3399)
- 96boards Rock960 (rock960-rk3399)
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
- */
-
-#ifndef __CONFIGS_LION_RK3368_H
-#define __CONFIGS_LION_RK3368_H
-
-#include <configs/rk3368_common.h>
-
-#define KERNEL_LOAD_ADDR 0x280000
-#define DTB_LOAD_ADDR 0x5600000
-#define INITRD_LOAD_ADDR 0x5bf0000
-/* PHY needs longer aneg time at 1G */
-
-#endif
projects / u-boot.git / commitdiff